902 reviews analysed
1. Dorman 47380 Vacuum Connector Value Pack, 65 Piece
2. SWORDFISH 60850-115pc Vacuum Tee Connector Assortment, 23 Sizes
Swordfish 60850 – 115pc Vacuum Tee Connector Assortment
3. 1/4“od Push to Connect Fittings Pneumatic Fittings kit 2 Spliters+2 Elbows+2 tee+2 Straight 8pack (1/4" Combo)
- utah pneumatic: push to connect air and water Pressure Range: 0-1 Mpa145 psi Max pressure:1.5 Mpa/ 217 psi/15 bar Temperature Range 0-60°C | 32～140°F Applicable Tube: PU/NYLON/Soft PE hose fitting
- Easy to install This tube connector is available in various styles and models . Each model to serve its purpose. All models of push lock fittings are designed to suit your pneumatic piping needs perfectly
- You can easily change the tubing connector direction even after installation. The release ring of conforms with the ellipse design to ensure that the disconnecting of connect push is in good shape
- All push to lock contains internal hexagonal holes this enhances the installation process in a narrow space.push connect fittings Can be dismantled and assembled easily These Push In Fittings Meet The Pressures And Temperatures Mentioned
- At Extreme Temperatures In Places Close To Heat Sources we Would Recommend Our Connect Push Brass Which Is More Resistant To High Temperatures We Are Ready To Answer Any Questions Related To Our Connect It Fittings
1. Except air and water,don’t attempt to use the fittings on other fluids
2. The tube fitting is prohibited where spark and fire might be occurred
3. The tube fitting is prohibited if water temperature is above 60’C
4. Never apply tube joint with additional external load(bending,twist or
pulling),otherwise damage or leakage will be occurred.
Check the end of tubing for a right angle cutting and check the external surface of
tubing for any damage or scratch.Please refer to following instruction in connection
of tubing.When you insert the air tubing into the joint,you will have two-step
feeling.Section one is locking claw and section two is sealing ring.Must insert tube
into section two.
Sleeve is used in tubing connection and disconnection.The sleeve is designed as an
oval shape,which is covienient in assembly and disassembly.However,round sleeve is
available to met any special demand the product has limited space for oval
sleeve.After connection of tube joint and tubing,always try to pull tubing and ensure
its firm connection.
Always use proper tool to tighten external hexagonal and internal hexagonal parts of
the tube fitting.Always apply recommended torque on screws otherwise extra torque
might damage thread and cause air leakage while insufficient torque might cause
loose screws and air leakage.
After Screws are tightened,you may adjust the direction of tubing with most of our
tube joint.If it is hard in adjustment,you may apply recommended torque to turn
screw to adjust direction of tubing.
4. Tailonz Pneumatic 1/4 Inch od Push to Connect Fittings Pneumatic Fittings Kit 10 Spliters+10 Elbows+10 tee+10 Straight (40 pcs)
- 【Product Name】1/4 ‘’ Plastic Push to connect fittings (40Pcs)
- 【Fluid Type】Air Only【Applicable Tube】Pu/Nylon/Soft PE tube
- 【Pressure Range】0~145Psi【Temperature Range】0-60°C | 32～140°F
- 【Advantages】High pressure resistance, easy installation and long service life.
- 【Others】Easy to install: Available in various styles and models . Each model to serve its purpose. All models of push lock fittings are designed to suit your pneumatic piping needs perfectly
5. Swpeet 12Pcs 6 Style 6mm Push to Connect Tube Fitting Assortment Kit, Including PL-1/4-N1, PL-1/4-N2, PC-1/4-N1, 1/4 inch od, 1/4 inch Od Y Spliter, PUC-1/4 Push to Connect Tube Fitting
- ☎ HIGH QUALITY —- These fittings are selected very high quality and the best part is they already have teflon tape so all you need to do is pull them out of the bag and thread them in.
- ☎ BODY STYLE —- In this kit, You will get 6 different styles tube fittings, These tube fittings body style including Male Elbow, Union Straight, Male Straight. Different Styles can meet different needs.
- ☎ TUBE FITTING SIZES —- PL-1/4-N1: Male Elbow – 1/4″ Tube OD x 1/8″ NPT Thread
- PC-1/4-N2: Male Straight – 1/4″ Tube OD x 1/4″ NPT Thread
- PL-1/4-N2: Male Elbow – 1/4″ Tube OD x 1/4″ NPT Thread
- 1/4 inch tee
- 1/4 inch y spliter.
- ☎ FLUID TYPE —- Air Only. Admitted, Air Vacuum Water liquid fit push to connect fitting kits quick connect fitting water (no freezing), Elliptical sleeve configuration is ideal for easy to push and release the tubing.
- ☎ WHAT YOU GET —- We have prepared 12 Pieces 6 different styles of tube fitting for you to meet your different needs, including 2Pcs PL-1/4-N1, 2Pcs PL-1/4-N2, 2Pcs PC-1/4-N1, 2Pcs 1/4 inch od , 2Pcs 1/4 inch od y spliter, 2Pcs PUC-1/4. Applicable Tube: Polyurethane and Nylon.
✿ Swpeet 12Pcs 6 Sizes 6mm Push to Connect Tube Fitting Assortment Kit
★ WHY CHOOSE US?
✔ 1, Good quality fittings and worked well for the application. Effectively prevent the jam from happening! Widely used for connecting bowden extruder.
✔ 2, Easy to use push to connect for air tubing. Nice that the threads already have sealing compound, no teflon tape needed.
✔ 3, Easy to disconnect tube by one push on the black cap.
☞ Thread: 6mm
☞ Net Weight: 6g/pcs
☞ Material: Stainless Steel and Plastic
☞ Color: Black and Silver
★ User’s Guide:
1. Except air and water,don’t attempt to use the fittings on other fluids.
2. The tube fitting is prohibited where spark and fire might be occurred.
3. The tube fitting is prohibited if water temperature is above 60’C.
4. Never apply tube joint with additional external load(bending,twist or pulling),otherwise damage or leakage will be occurred.
★ Package Include:
▲ PL-6mm-N1 Connect Tube Fitting ———– 2Pcs
▲ PL–6mm-N2 Connect Tube Fitting ———– 2Pcs
▲ PC–6mmN1 Connect Tube Fitting ———– 2Pcs
▲ 6mm od Connect Tube Fitting ———– 2Pcs
▲ 6mm od y spliter Connect Tube Fitting ———– 2Pcs
▲ PUC-6mm Connect Tube Fitting ———– 2Pcs
6. 625pcs Heat Shrink Tubing Kit, Heat Shrink Tubes Wire Wrap, Ratio 2:1 Electrical Cable Sleeve Assortment with Storage Case for Long Lasting Insulation Protection by MILAPEAK (8 Sizes, Black)
- ★ Versatile & DIY Helper: Multiple sizes high-quality heat shrink tubing for your choose, they can be used for solder joint protection, group of lines marking, resistance electric capacity reason protection etc.
- ★ Tidy Connection: Are you bothered by the fact that wrapping cable wire connection with electric tape which is ugly and not safe enough. Now the good news is that our heat shrink tubing can avoid these troubles and give you a tidy connection.
- ★ Safe & ECO-Friendly: Our heat shrink tubes are RoHS Compliant which ensures its safe and reliable. Does not contain heavy metal and other environmentally hazardous substances. Protect you and your family from toxins.
- ★ Fast & Easy Use: Our heat shrink tubing has the advantages of good electrical insulation, corrosion resistance and high temperature resistance. Soft and flexible wire shrink wrap, low shrinkage temperature-minimum shrinkage temp: +158℉(+70°C), fast shrinkage, easy to use a heat gun.
- ★ What You Get – Total 625pcs heat shrink tubes, 8 Sizes, Diameter: 2/5″(30pcs), 5/16″(30pcs), 1/4″(45pcs), 1/5″(60pcs), 1/6″(90pcs), 1/8″(100pcs), 1/12″(120pcs), 1/24″(150pcs). Single length: 1.57 inch. Comes with storage box, our worry-free 12-month and friendly customer service.
7. Swordfish 61120 – Vacuum Connector Assortment, 65 pieces
8. Dorman Help! 47397 V-Cap Assort.Colored
By our suggestions above, we hope that you can found Vacuum Tube T Assortment for you.Please don’t forget to share your experience by comment in this post. Thank you!