686 reviews analysed
1. Dash Cam Hardwire Kit, Mini USB Hard Wire Kit Fuse for Dashcam, Plozoe 12V-30V to 5V Car Dash Camera Charger Power Cord, Gift 4 Fuse Tap Cable and Installation Tool（11.5ft）
Feature
- ★【Upgraded the 2nd Generation Dash Cam Hardwire Kit】You will get 1 x Mini USB hardwire kit,1 x installing crowbar,4 x fuse tap cable,dash cam hardwire with the most popular fuse types will meet the applications for most car models
- ★【24 Hours Surveillance 】The vehicle hard-wire kit connected to car battery or fuse box power, can uninterruptedly supply power for dash camera for 24 hours. It can even supply power when the car is turned off.If the voltage of your car battery drops to 11.6V or 23.5V, the regulator will cut off the power,which leaves you with enough power to start your car
- ★【High Secure Standards】The mini USB hardwire kit with built-in precise switching power supply module can transform 12V(24V) to 5V. The built-in safeguards protect your devices against excessive current, overheating
- ★【Wide Compatibility】This mini usb cable hardwire kit is suitable for most car models(Voltage between 12-30V). Our usb hardwire kit works for almost all car mini USB device, such as dash cam、mirror cam、GPS navigator and radar detector etc
- ★【Worry-Free Sales Service】1 year free-replacement warranty for quality problems.Be aware of Fake and Counterfeit products from NON-Plozoe Seller.
Description
Upgrade the 2nd Generation Dash Cam Hardwire Kit 12v-30v to 5v（Mini USB / 11.5ft）：
It’s a must-have if you’re using a dash camera in your car or truck. It connects the camera directly to the fuse box under the dashboard for continuous power from the vehicle’s battery. Our mini usb hard wire kit frees up the 12-volt power socket (the cigarette lighter) for other uses. as the hidden wiring,it will make your car more neat.
Plozoe Hardwire Kit applied to: any type of cars, trucks, etc; Fits for dash cam、mirror cam、GPS navigator, etc.
Specifications:
★ Connector: Mini USB
★ Input: 9V-30V
★ Output: 5V / 2A
★ Working Temperature:-40-80℃
★ Cable Length: 11.5ft (3.5M)
★ Low Voltage Protection: When voltage lower than 11.6 V or 23.5 V, automatically cut off the power
Package Contents:
★ Plozoe Hardwire Kit for Dash Cam x1
★ Fuse Tap Cable x4
★ Installing crowbar x1
Warm Tips:
★ If you don’t have experience on installing the hardwire kits for the dash cam, please ask professional for help.
mini usb hardwire kit hardwire dash cam dash cam hardwire kit dashcam hardwire kit mini usb cable for dashcam hardwire dash cam usb mini usb to fuse dash cam power supply hard wire dash cam dash cam hardwire dash cam hardwire kit micro usb mini usb hardwire kit hardwire dash cam dash cam hardwire kit dashcam hardwire kit mini usb cable for dashcam hardwire dash cam usb mini usb to fuse dash cam power supply hard wire dash cam dash cam hardwire dash cam hardwire kit micro usb
2. Vantrue 10ft Mini USB 12V-24V to 5V Dash Cam Hardwire Kit with Mini/ACS/ATO/Micro2 Add a Circuit Fuse Holders, Low Voltage Protection for Mini USB Dash Cams, GPS Navigator, Radar Detectors
Feature
- 【Compatible 12 – 24V Vehicles】This hardwire kit connects the camera directly to the car, truck, bus, suvs, or big rig for continuous power, accepts voltage from any type of vehicles runs on 12 – 24V.
- 【24/7 Parking Surveillance】Directly to the battery for constant 24hrs/7days power to protect against theft when your car is in the parking lot.
- 【Power Supply】Directly to the ignition wire for power only so it can turn on and off with the ignition and you don’t have to worry about plugging in the charger, or turning the dashcam on, or any such stuff.
- 【Low voltage protection】It has a smart low voltage protection system that will automatically shut off the power to your dash cam when the battery voltage drops to 11.4V or 22.8V, thus preventing it draining the battery.
- 【Mulitiple uses】Mini USB plug compatible with all mini usb dash cams such as Vantrue N2 Pro/N2/X3/T2/N1 Pro/X1, GPS navigator and radar detector etc, it always frees up the cigarette lighter for other devices.
3. 15ft MicroUSB & MiniUSB Dash Cam Hardwire Kit with Mini/LP Mini/ATO/Micro2 Fuse, Micro to Mini (and Type-C) Port Adapters and Battery Drain Protection System
Feature
- ONE FITS FOR ALL: With Micro to Mini (left angled) and Micro to Type C port converters, the kit is basically fit for ALL Dash Cams or Car Charger like NuCam DL, Wireless Charger Phone Holder Nucharger Auto, Rexing, ROAV, Anker, DDPai, Papago etc. Also, it comes with most popular fuse types including Low-Profile Mini, Mini, ATO(Regular), and Micro2. It has left angled mini USB head. For right angled mini USB head, please search B0787LD92N.
- ENOUGH LENGTH: Overall 15ft hardwire kit can be installed basically on All vehicles. Input length: 3ft, Output length: 12ft.
- BATTERY DRAIN PROTECTION SYSTEM: Device powers off when vehicle battery voltage drops below 11.6V for protection purpose to save battery to start your engine. When car batteries are new, they’re around 12.5 Volts or more. It’s also suitable for 24V systems.It is recommended to turn on parking mode for your dash cam to save your battery power. Contact us for higher cutoff voltage model if your battery is drained too low to start your engine.
- EASY INSTALLATION: Installation is easy and clean without any help from professionals! However, our customer service is also immediately responsive if you do have questions.
- WARRANTY: One year free service for any question you are facing with this dash cam hardwire kit.
4. Meknic SV-PC01 Dash Cam Hardwire Kit with Battery Drain Protection System,2A Dash Cam Hardwire Fuse Kit For Car DVR Camera Or GPS Power Supply-Installation Manual Include (Mini USB)
Feature
- ✅ Meknic Dash Cam Hardwire Fuse Kit for car DVR recorder that Use Right Elbow Angle Mini USB,24 Hour Surveillance and Protects Against Battery Dying
- ✅ No need for cable from car cigarette lighter socket, replace it with a permanent hidden cable Installation in minutes with little to no expertise required. Simply piggy backs from car fuse box socket for Meknic Car Dash Cam Hardwire Fuse Kit
- ✅ Meknic Hardwiring Kit Use a Fuse Tap or Wire Tap to Draw Power From Fuse Block Or Wire, No damage to the original circuit of the car
- ✅ Meknic Cam Hardwire kit With low voltage protection function, protect car’s battery, 12V-11.2V(Cut Off Automatically) 24V-23.2V(Cut Off Automatically) to stop your car DVR working automatically
- ✅ Warranty: The company offers one year warranty and 100% satisfaction guarantee and 30-day, hassle-free return policy for Meknic Car Dash Cam Hardwire Fuse Kit.
5. VanTop V9H Dash Cam Hardwire Kit, 11.5ft Mini USB Hard Wire Kit for Dashcam Converts 12V-24V to 5V/2.5A w/Fuse Kit and Installation Tool, Low Voltage Protection for Dash Cameras
Feature
- Upgraded Automatically Detection Device – VanTop V9H hardwire kit will automatically detect the state of the car ignition to start recording video without a manual setting. An upgraded automatically detection device to make it easier to run a dash cam.
- Multiple Security Protection – With low voltage protection, V9H hardwire kit will automatically cut off the power after 60s when the voltage is lower than 11.6V/23.5V (it depending on your vehicle). More security protection like over-current, short-circuit, reverse connection, and overheat.
- 24 Hours Surveillance – With VanTop V9H hardwire kit, the continuous power supply makes parking monitoring function more reliable. Besides, supported by the time-lapse shooting function to maximize the advantages of memory.
- High Compatibility – VanTop V9H hardwire kit works for almost all car mini USB devices, such as dash cam, mirror dash cam, GPS navigator, and radar detector. Specially designed for VanTop H610/H609 mirror dash cam and more VanTop models.
- Easy Installation – You will get 1 x hardwire kit, 4 x fuse taps and blade fuses, 1 x easy pry tool, and 1 x quick guide. Simple hidden wiring keeps the car neat and tidy and releases the cigarette lighter for connecting to more devices. TIPS: Please read the quick guide carefully before use.
Description
VanTop V9H Dash Cam Hardwire Kit
Specification
Input Voltage: DC12V/24V
Output Voltage: 5V-2.5A Max
Working Temperature: -40~160°F
Over-current Protection: 2.5A
Low Voltage Protection: 11.6V±0.2/23.5V±0.2
Connector Type: Mini USB
Cable Length: 3.5M/11.5FT
Package List
1 x Hardwire Kit
4 x Fuse Tap
4 x Blade Fuse
1 x Easy Pry Tool
1 x Quick Guide
TIPS
1)We strongly recommend the professional installation of the Hardwire Kit.
2)Please make sure the ignition is off before installing the Hardware Kit.
3)Carefully utilize the tool to test and check the polarity and grounding before confirming the installation.
4)For safety reasons, we strongly recommend that you do not use any fuse slot used by any of your vehicle’s critical components, such as the Air Bags.
Installation Steps
Step 1: Connect the Yellow Wire of the Hardwire Kit with one type of Fuse Taps that your vehicle requires.
Step 2: Connect the Fuse Tap to the positive terminal of your Constant Fuse Slot.
Step 3: Connect the Red Wire of the Hardwire Kit to the positive terminal of the ACC Fuse Slot in the Fuse Box. ACC Fuse Slot only has power when the ignition is on.
Step 4: Crimp the Black Wire and screw it down to any non-costed metal bolt/screw in your vehicle to ground it.
Step 5: Connect the Mini USB connector of the Hardwire Kit to the Mini USB input of your Dash Camera, and then the installation is completed.
6. Dash Cam Hardwire Kit, Mini/Micro USB Hard Wire Kit 12V-24V to 5V Hardwire Kit with Low Voltage Protection 13ft Car Dash Camera Charger Power Cord for Dashcam GPS Power Supply Radar Detectors and More
Feature
- ❖{Broadly Compatibility}❖ : Input:12V-24V
- Output:5V/2A (also fits for 1A). Coming with both Mini and Micro USB ports, The dash cam hardwire kit compatible with all of dash cams Car DVR, GPS Navigator, Radar Detectors and More. Also comes with Low-Profile Mini, Mini, ATO (Regular) and Micro2 fuse adapter, suitable for most cars. Leads come with protective sleeve to cover the crimps
- ❖{Low Voltage Protection Function}❖: Equipped with sensitive voltage sensing switch, the mini usb hard wire kit will monitor the car battery voltage in real time. When vehicle battery voltage was drops to 11.4V (12V input) or 23.2V (24V input), this hardwire kit will cut the power supply, leaving enough power to ignite the engine and will not damage the battery (Anti-Interfere Magnetic Ring included)
- ❖{24 Hour Surveillance}❖: The hard wire kit for dash cam with Mini, ACS, ATO, Micro2 add a circuit fuse holders. The dash cam hardwire connected to car battery or fuse box power, can uninterruptedly supply power for dash camera for 24 hours. Keeps it powered even after engine off, protect your car all day
- ❖{Easy to Install Hardwire Kit for Dash Camera}❖: With the dashcam hardware kits you don’t need for cable from car cigarette lighter socket, replace it with a permanent hidden cable. Installation in minutes with little to no expertise required. Besides, We presented clips and crowbars to help you open the car insurance box. There is also a paper installation instructions
- ❖{You will get}❖: You will get a total length of 13ft hardwire dash cam kit. A shielding magnetic ring included (As most of people install dash cams which interfere their car radios), it will be help you solve this problem, also come with all needed install tools, and the protective case of wire connectors at all cable connections that makes installation easier and firmer. Any problems with our items, pls feel free to contact us,we will reply you within 12 hours and won’t let you suffer any loss
7. SHISHUO Dash Cam Hardwire Kit – Mini USB and Micro USB Port 3.5m Cable with LP Mini/Mini/ATO/Micro2 Fuse, 12V to 24V Input, 5V Output for Dash Cam GPS Sat-Nav with Battery Drain Protection
Feature
- 3.5m hardwire kit for dash cam or other device powered by Mini USB port and Micro USB port, 5V/1.5A steady output, voltage input supports from 12V-24V
- Comes with Low-Profile Mini, Mini, ATO (Regular), and Micro2 fuse adapter, suitable for most cars. Leads come with protective sleeve to cover the crimps
- Make parking monitor for dash cams (should the device support) available, keeps it powered even after engine off
- Battery drain protection will cut off the power once the input voltage drops to under 11.6V (23.2V for 24V input), leaving enough power to ignite the engine
- 2-year warranty from SHISHUO. Worry free aftersales customer services.
Description
SHISHUO Dash Cam Hardwire Kit – Keep your dash cam powered even after engine off!
Dash cam product’s parking monitor function will require device been hardwired to car battery, that’s the best reason why you’ll need this hardwire kit!
This hardwire kit comes with 3.5m hardwire cable with Mini USB port and adapter cable to convert to Micro USB port, providing steady 5V/1.5A output. Big voltage input ranging from 12V-24V.
4 fuse adapter available, Low-Profile Mini, Mini, ATO (Regular), and Micro2, suitable for most cars. Each lead has a protective sleeve to cover the crimp, safer and more durable.
Featured with battery drain protection, power will be cut off once the input voltage drops to under 11.6V (23.2V for 24V input), ensure there’s enough power left to ignite the engine.
Package Content
1* Hardwire cable with Mini USB port
1* Mini USB to Micro USB adapter cable
4* Different types fuse lead
4* Different types fuse adapter
1* Crowbar 15* Cable clips
8. Dash Cam Hardwire Kit, Micro USB & Mini USB Hard Wire Kit Fuse for Dashcam, Dash Camera Charger Power Cord, （13ft）
Feature
- ★【Wide Compatibility】This hardwire kit is suitable for most car models(Voltage between 12-24V). Our hardwire kit Equipped Mini USB and Micro USB ports,works for almost all car mini USB & Micro USB ports device, such as dash cam、mirror cam、GPS navigator and radar detector etc(Not fits for Garmin device)
- ★【24 Hours Surveillance 】 The vehicle hard-wire kit connected to car battery or fuse box power, can uninterruptedly supply power for dash camera for 24 hours. It can even supply power when the car is turned off.If the voltage of your car battery drops to 11.6V or 23.2V, the regulator will cut off the power,which leaves you with enough power to start your car
- ★【High Secure Standards】Input: 12v – 24v, Output: 5v 2A /Build in Dynamic IC Charge IC & Magnetic ferrite to prevent Electro-Magnetic shock,Low Voltage and Overcharge Protection, Overall 13ft hardwire kit can be installed basically on All vehicles. Input length: 3ft, Output length: 10ft.
- ★ 【 Package Contents 】Dashboard Camera Hardwire Kit ( mini USB & Micro USB ports) ,Fuse Tap Cable x4 , Installing crowbar x1 ,User Manual,
- ★ 【WARRANTY】45-Day Money Back Guarantee and 24-Month Product Replacement Warranty ， Strict production management mode and high quality material let us to make the warranty
9. Ssontong Dash Cam Hardwire Kit, Mini USB Port with Fuse,Low Voltage Protection, DC 12V – 26V to 5V/1.5A Max Car Charger Cable kit Micro USB Dashboard Camera Power Supply Car Charger GPS Car DVR Power
Feature
- Input Range: DC 12~24V Output Voltage: DC 5V, Output current: 2A Working Temperature: -40~ 160 Degree F
- 10 Foot hardwire kit for dash cam and other devices that use Mini USB. Our new kit set comes with Low-Profile Mini, Mini and ATO(Regular) Fuse Adapters. Some old model might only have ATO fuse kit inside
- 24 Hours Surveillance: The vehicle hard-wire kit connect to car battery or fuse box power, can realize continuous power supply for 24 hours. It can keep powered on even car turned off
- Low Voltage Protecting: With function of auto detect battery voltage and low voltage protecting, it can auto cut power output when it’s lower than 11.6V or 23.5V, make sure the vehicle can start normally
- Output Voltage More Stable: The vehicle hard wire kit with built-in precise switching power supply module, it can transform 12V(24V) to 5V, output voltage is more stable
Description
Specification :
Connector: Mini USB Connector
Input Voltage:12V-26V
Output Voltage:5V
Output Current:1.5A
Working Temperature:-40-160℃
ACC Signal for Parking Mode Product Quality Authentication:CCC Cable
Length:11.5ft
Low Voltage Protection: When lower than 11.6 V or 23.5 V automatic cut off
Package Included:
1.Dash Cam Hardwire Kit – Mini USB Simple
2 steps installation: 1. Plug the mini-USB end into dash cam. 2. For the other end connects with your 12/24v car electrical system, provide a seamless integration.
Warm tips:
– If you don’t have experience on installing the hardwire kits for the dash cam, please ask a professional for help.
– You may need a Blade Fuse Add-A-Circuit Fuse Holder for install to fuse box.
– This Hardwire kit for the Fuse Box is Low Profile Mini, Please check your car model before purchasing.
– If you have any problems , you could e-mail us directly by Amazon with order ID, we will reply in 24 hours, and we will always be here to solve your concern.
Conclusion
By our suggestions above, we hope that you can found Usb Hardwire Kit For Dash Cam for you.Please don’t forget to share your experience by comment in this post. Thank you!
