Top 10 Type Of Water For Water Cooling Pc

Thermaltake introduces the V-Tubler PETG (4-Pack) hard tubing for custom PC water cooling configurations. Manufactured from premium PETG, the V-Tubler rigid tubing allows users to route the tubes runs exactly to their heart’s content. Designed with an 16mm OD / 12mm ID tube size, the PETG tube easily secures to 16mm fittings to give users better mounting, fitting, and flow. Make your pipe dreams a reality with endless possibilities to connect your vital components together for an unrivaled presentation.

Thermaltake introduces the V-Tubler PETG solid tubing for custom PC water cooling configurations. Manufactured from premium PETG, the V-Tubler rigid tubing allows users to route the tubes runs exactly to their heart’s content. Designed with 5/8” (16mm) OD PETG tube adapter fittings, give users better mounting, easier fitting, and ideal flow. Choose from: 500mm and 1000mm to make your system a showcase for all to see with the Thermaltake V-Tubler water tubing.

• Material: PETG
• Inside Diameter: 12 mm
• Outside Diameter: 16 mm (5/8”)
• Length: 100 cm *4
• Color: Transparent

Features:

A kit of computer water cooling reservoir, consists of a main water reservoir, plastic brackets, L-type metal stand and screws kit. Effectively for heat reducing, maintain the proper temperature to keep the computer running well. Made of high-quality POM and PMMA material, shock, acid and alkali resistance, durable to use. Full open design, free to screw up and down. Noise reduction, work quietly and do not disturb you while you are working or studying on the computer.

Specifications:

Color: Transparent

Shape: Cylinder

Screw Thread: G1/4

Material: POM + PMMA

Interface Diameter: Approx. 12.9mm

Package Size: Approx. 20 * 14 * 7cm

Weight: 200g

Package List:

1 * Cylinder Water Reservoir

2 * Plastic Brackets

2 * L-Type Metal Stands

1 * Screws Kit

DIYhz Water Cooling Computer Radiator

Product Specifications:
– Color: Black
– Tube Quantity: 8
– Weight:121g
– Material: Aluminum
– Mouth: 9.5 (D) mm
– Fitting Thread: G1/4 Inch
– Fin Density: 18 lines per inch
– Model Number: 80mm x 80mm
– Fit ID Tube Inner Diameter: 8 -12mm / 0.3” – 0.5”
– Fit ID Tube Outer Diameter: 9.5 mm / 0.37”
– Outer Size: 120 x 80 x 25mm / 4.72” x 3.1” x 0.99”(L*W*H)
– Longer Screw Size: 31 x 3 mm / 1.2” x 0.12”(L*D)
– Shorter Screw Size: 7 x 3 mm / 0.3” x 0.12”(L*D)

Specifications:
– Material: Metal
– Pure aluminum fins
– Parts brazing seal as a whole
– Joint: disposable stainless steel-band
– The sealing process: vacuum aluminum brazing
– Item Type: Computer Radiator Water Cooling Cooler
– Can be installed 80mm fan, mounting hole size: 69.5（D）×69.5（W）mm
★ Optimized for high performance at low cost, No weak welds nor leakage.
★ Suitable for computer CPU cooling, industrial frequency conversion driver, laser head cooling, air conditioning evaporator and industrial control cabinet cooling.

Package Included:
1 x Water Cooling Radiator (This product does not have a fan)
1 x 1m Silicone tube
4 x Short screw
4 x Long screw

PrimoFlex Advanced LRT Tubing has been designed, formulated, and manufactured for today’s evolving standards in the PC water cooling industry. Advanced LRT has been carefully formulated to perform in a wide range of closed loop cooling systems, creating the most compatible water cooling tubing ever created.
SysPrep & Liquid Utopia INCLUDED
Included in the package at no additional cost is a 15mL bottle of SysPrep – Cooling Loop Pre-Treatment as well as a 15mL bottle of Liquid Utopia. Any successful venture into water-cooling starts with a true cooling loop preparation which can only be achieved by using Sys Prep. It will “flush” your loop and its components of any debris left by the manufacturing processes of your reservoir, block, pump, or radiator, leaving your water cooling loop clean, clear, pristine and ready for any type of coolant. Once your LRT tubing is crystal clear the Liquid Utopia offers a full line of protection against algae and corrosion.
Warnings/Cautions: With the use of different components, materials, fluids, and flow rates, results may vary with the appearance of your tubing. Advanced LRT is designed to work with a large variety of cooling components, however the use of alcohols, Ethylene Glycol and as well as any other harmful chemicals is strictly prohibited and will void your warranty.Tubing will stain if dyed coolants are used. PrimoChill is not responsible for any damage caused by or when using this product. Please use at your own risk.

The EK-CryoFuel is a new revolutionary coolant for PC liquid cooling systems. EK-CryoFuel is the most chemically stable coolant that provides enthusiasts and gamers with the best possible level of performance and thermal efficiency with emphasis on color stability. EK-CryoFuel coolant is a pure, non-toxic coolant based on the patent pending chemical formula, which prevents the creation of any sediments in the liquid cooling loop. Liquid cooling users can rest assured that the EK-CryoFuel coolant, with its very low viscosity, will not clog or damage their water blocks and other parts of the loop when used with EK-DuraClear or EK-ZMT tubing.

Specification:
Material: Acrylic + ABS
Model: PU-FS4-J
Rated current: 0.7A
Rated function: 8W
Pump head: 4 meters
Pump flow: 800L/H
Starting voltage: 7V
The highest voltage: 13.5V
No-load speed: 5000RPM
Load speed: 3000RPM
Size: Approx. 5.5 * 6.4 * 6.4 cm/ 2.2 * 2.5 * 2.5 in
Weight: about 285 g

Package list:
1 * Water Pump
1 * Rubber Mat

Features:

1.New patent design, ball modeling,exquisite appearance.

2. T type 4 way threaded hole, which canchange the water path in the direction of maximum 180 degrees.

Condition: 100% Brand New.

Material: Brass

Outside diameter: approx. 24mm/0.94”

Quantity: 1pc

Weight: approx. 60g

Color: Black

Primochill System Reboot was created to address the need to prepare/clean existing cooling loops AND be able to clean out old dyes that may have leached onto components during previous usage. Similar to Sysprep this flush style solution will cleanse out any debris/residue leaving your water cooling loop clean, clear, pristine and ready for any type of coolant. The beauty of ReBoot is it’s ability to pull color from stained components.

Specifications

Compatibility: ReBoot is compatible with rigid and flexible tubing of all sizes.  It is safe to use on rubber, plastics and acrylics

Included Parts: 1x 15ml Bottle of ReBoot (makes 1 gallon of coolant)

Instructions
1.Double-check connections to ensure loop is “closed”. No Leaks!
2.Empty bottle of ReBoot into 1 US Gallon of fresh DI or Distilled water, shake for 30 seconds
3.Fill loop with treated solution and be sure to remove as many air bubbles as possible.
4.Start pump and begin circulating the treated solution.
5.Run solution for at least 24 to 48 hours to ensure loop is properly flushed and treated. ReBoot is not an effective final coolant and should be replaced with coolant before any extended use of computer.
6.Drain System. Inspect drained solution for debris or foreign particles. Repeat flush if needed.
7.Fill system with fresh DI or distilled water and flush thoroughly to remove ReBoot solution checking for foam.
8.Drain system.**.
9.Fill loop with your choice of coolant and begin water-cooling.
** Reboot needs to be flushed from the system until no foam is seen and water runs clear

Warnings

Product paranmeters:
Color:Black
Screw thread:G1/4″
Screen Type:OLED Digtal display
Material:POM
Pattern:Smooth
Product Size:Please refer to the dimension drawing