833 reviews analysed
1. DIGITEN LCD Digital Thermostat Temperature Controller Simple Stage Pre-Wired Heating & Cooling w/Sensor 110V-240V, -40~248℉ for Beer Fermentation Refrigerator Fan Control 10A
- ★【High Accuracy】: The temperature sensor is made of silicone, it is waterproof, high quality. This device provides constant optimal temperatures, and keeps your environment in the ideal temperature range.
- ★【Large LCD screen】: Glare free and eye protected, standard U.S. outlet, plug and play design, support °C/°F display, easy to read and programme.
- ★【Easy to use and program】: Only 2-step settings for your application, it can be used for heating mode or refrigeration mode.
- ★【Convenient Design】: Handheld device appearance consistent with the principles of ergonomics. Max output load: [email protected], [email protected], max current: 10A.
- ★【Wide Applications】: Home wine/beer brewing, aquarium, green house, seedling heat mat, BBQ, boiler operating control, BBQ, grow tent, fermentation, incubation, etc.
This thermostat is simple-stage, electronic temperature controller. The large, lighted LCD screen display is easy to read. The case is designed with fireproof ABS material for human engineering. Temperature sensor is waterproof with high quality, high-accuracy.
Large LCD screen
Display the sensed temperature, setting temperature, and custom icons on the display indicate working mode, glare free and eye protected.
Support reading with Centigrade or Fahrenheit unit
Easy to use and program
Only 2-step settings for your application, and plug and play design.
With a temperature correction function
Allow user to adjust measuring accuracy base on diferet probe, etc.
Delay starting protection
Protect refrigerating compressor lifetime, avoid compressor to start frequently.
High and low temperature alarms are available
Over-temperature and sensor fault alarm
Power Supply: 100-240VAC 50/60HZ
Max output load: [email protected], [email protected]
Max current: 10A
Temperature Control Range: -40~120℃, -40~248℉
Temperature Control Mode: Heating or Cooling
Temperature Resolution: 0.1℃, 0.1℉
Temperature Accuracy: ±1℃, 1℉
Buzzer Alarm: High and Low Temperature Alarm
Sensor Type: Waterproof NTC Sensor
Sensor length:Approx 2m(6 fts)
Input Power Cable Length:150cm (5ft)
Output Power Cable Length: 18cm (7inches)
Controller Dimension: 137*65*28mm
The controller will save all settings when power failure. The DIGITEN products are guaranteed to the original owner for one year against defects in workmanship and materials. If there are any questions, please contact us, we will help you.
1 x DTC101 Temperature Controller
1 x NTC sensor
1 x Manual
2. Inkbird Digital Temperature Controller Thermostat & Timer Time Switch AC 100~240V,1200W Only Heating for Breeding, Planting ect. NO COOLING CONTROL
- NO COOLING CONTROL.There is only heating relay. It can be widely use in over-heat protection and automatic temperature control system of all sorts of electrical equipment for aquarium, pets breeding, hatching, fungus fermenting, and seed germination accelerating, etc. Only one relay and it extends two plugs which both are heating plugs, NO cooling plug.
- It can be set to two different temperatures with its function of dual time cycle setting during 24 hours according to the day and night, which can more suitable for the physiological needs of animals and plants.
- This plug and play product is designed with dual LCD display, and offers the optional display of Centigrade or Fahrenheit, which makes it more humanized temperature control. With large power output 1,200W, it’s suitable for most applications.
- The temperature can be controlled more accurately with its function of temperature calibration and temperature hysteresis.
- There is only heating relay. It can be widely use in over-heat protection and automatic temperature control system of all sorts of electrical equipment for aquarium, pets breeding, hatching, fungus fermenting, and seed germination accelerating, etc.
3. Century Digital Cooling Thermostat Controller for Cooling Device 40-108°F
- ✓ EFFORTLESS COOLING SETUP: Simply place the probe, plug-in the thermostat controller, and use the large 3-button interface to choose your desired temperature setting. Digital display supports units in both Fahrenheit and Celsius.
- ✓ EASE OF MIND: Handy LED cooling and power indicator lights allow you to see the controller’s status even in total darkness. Controller features a convenient hanging tab, and a bright, easy-to-read display inside a tough plastic housing.
- ✓ RUGGED CONSTRUCTION: The cord for the temperature probe and grounded 3-prong plug measure an extended 6-feet in length, designed to suit almost any application you can imagine.
- ✓ VARIETY OF USES: Our thermostat controller can be used for fans and ventilation. Max load 400w or 1000btu for refrigerators and ACs. Easily keep your various environments in their ideal temperature range. This product is NOT for HEATING products.
- ✓ SAFE & RELIABLE: Our thermostat controller is ETL listed, and rigorously tested for quality control and safety. Conforms to UL Std No. 60730-1, 60730-2-9. Temperature control range is 40-108°F, temperature display range is 32 -140°F. Rated Voltage is 120VAC 60Hz, Max Loading: 8.3A 1000W. Do not immerse controller or probe into water.
The digital cooling controller is designed to control cooling device in order optimize crop-specific growing requirements. Easy to use, a digital display controls the devices’ output temperature, which ranges from 40 to 108 °F (5 – 42°C). Depending on the user’s preference, the temperature can be toggled to display in degrees fahrenheit or celsius. Our digital thermostats feature a standard, three-prong ground plug and are compatible with all heat mats. Provides constant optimal temperatures. Protect your safety with isolated strong wires and ETL certificate. How to adjust temperature setting: Press and hold ‘Set’ button for 3 seconds to enter the temperature selection mode, Press ‘Up’ or ‘Down’ button to adjust the temperature, Press ‘Set’ button again to select the displayed temperature as the target, Press ‘Set’ button to display the preset temperature. Current measured temperature will be shown when no button is activated.
4. Poniie TC-15A Digital Temperature Controller 2-Stage Outlet Thermostat Heating & Cooling Mode for Greenhouse, Terrarium, Brewing and Fermentation (110V 15A)
- CONVENIENT DESIGN: Pre-wired plug and play design, easy to program, high accuracy waterproof sensor, support °C/°F display
- DUAL RELAY OUTPUT: Be able to connect with heating and cooling loads at the same time with control range (-40~210℉)
- DUAL DISPLAY WINDOW: Be able to display measured temperature and set centering temperature at the same time
- CALIBRATION & PROTECTION: Be able to calibrate temperature and set delay to protect your refrigerator from cycling too fast
- BUY WITH CONFIDENCE: 1-YEAR Warranty
- MAX. 1650W (110V)
- Over temperature & faulty sensor alarm, with power off memory
5. Farm Innovators TC-2 Cold Weather Thermo Cube Thermostatically Controlled Outlet – On at 20-Degrees/Off at 30-Degrees
- Plugs into a standard 15 amp electrical outlet and turns power on automatically according to ambient air temperature
- Saves money by using power only when temperatures require heating
- Two receptacles for use with more than one electrical device
- Turns on as temperature falls to approximately 20°F, off as temperature rises above 30°F
- Ideal for automotive applications, including engine and battery heaters
The Thermo Cube is a unique, patented electrical device that plugs into a standard 15 amp electrical outlet and turns power on automatically according to ambient air temperature, saving money by using power only when temperatures require heating or cooling. There are five models available with different temperature ranges to choose from. Each unit has two receptacles for use with more than one electrical device. Cold weather model TC-2 turns on at approximately 20°F, and turns off as temperature rises above 30°F. It is ideal for automotive applications, including engine and battery heaters. One year limited warranty.
6. bayite Temperature Controller 1650W BTC211 Digital Outlet Thermostat, Pre-wired, 2 Stage Heating and Cooling Mode, 110V – 240V 15A
7. Inkbird Pre-Wired Digital Dual Stage Temperature Controller Outlet Thermostats 110V 1000W With 12" Stainless Probe Sensor DC Cord for Fermentation Kegerator ect
- 12inch Stainless Probe with 6.5ft DC cord
- Temperature calibration
- Dual relay output, be able to connect with refrigeration and heating equipment at the same time
- Heating/Cooling differential function could be set separately for refrigeration and heating to protect temperature controller from violent change.
- Support reading with Centigrade or Fahrenheit unit
This temperature probe can be submersed into beer direclty during fermentation.
No need to worry about inserting a smaller probe into a separate thermowell temperature probe.
It’s compatible with INKBIRD’s following controllers:ITC-308,ITC-306T,ITC-310T.
Plug and play design,easy to use;
Dual relay output,be able to connect with refrigeration and heating equipment at the same time;
Support reading with Centigrade or Fahrenheit unit;
Maximum output load:1100W(110V);
Dual display window,be able to display measured temperature and set temperature at the same time;
Compressor delay protection for refrigeration control
High and low temperature alarms are available;
Temperature Control Range:-50~99°C/-58~210 °F
Temperature Control Mode:On/Off Control,Heating and Cooling
Temperature Control Output:Max.10A,100V ~240VAC
Input Power Cable Length:1.5m(5ft)
Output Power Cable Length:30cm(1ft)
Buzzer Alarm: High and Low Temperature Alarm
Over-temperature and sensor fault alarm
Measuring temperature range:-50℃~120℃
Sensor Type: NTC
Probe Material:Stainless steel
Probe Dimensions:6mmx300mm(0.24in x 12in)
Cord Length (excluding probe):2m (6.5ft)
1xITC308S temperature controller;
1xStainless Steel Probe DC Sensor
8. Johnson Controls A19AAT-2C Freezer Temperature Controller (D132)
Use this handy controller to regulate the temperature in your freezer between 20 – 80F . Great for turning a chest freezer into a keg refrigerator. Strictly a mechanical thermostat for cooling only, it is simple to use and economical. It operates with a gas filled probe on a 6-foot capillary tube. When the gas contracts or expands in the probe, it triggers a mechanical device inside the control which turns the power on or off. There is no probe temperature readout on the dial, so keeping a thermometer inside the refrigerator is highly recommended to keep track of the actual temperature. On most refrigerators, the controller will allow a usable range of 37 to 80 F, while on freezers, the controller will be able to reach its full 20 to 80 F range. Features: Made of stainless steel. Adjustable with the turn of a knob. No drilling necessary. Plug unit into wall and then run the sensor into your freezer. Male and female plug in one. Specs: Temperature dimensions: 4 3/8″ H x 2 1/8″ W x 1 1/2″ D. Cord dimensions: 6′. Remote sensor bulb: 5 1/2″W. Remote sensor bulb capillary tube: 6′. Temperature range: 20 – 80F. Voltage: 120 VAC.
9. Heating Thermostat Inkbird ITC-306T Heater Temperature Controller Pre-Wired Dual Stage Timer Time Switch ONLY HEAT Outlet AC 100~240V,1200W NO Cooling
- Only Heating, NO Cooling !!! Temperature Control Mode: On/Off Control. Please note it is only heating controller without cooling function. Both of the plugs can control the heating. But totally could not over 1100W.
- Dual time cycle setting during 24 hours, can be set different temperature from day and night on the basis of the physical needs of animals and plants.
- ℃ / ℉ Display can be chosen.Maximum output load: 1100W(110V). Temperature calibration
- Over-temperature and sensor fault alarm
- Plug and play design. Easy to set your parameters.
- Dual display window, be able to display measured temperature and set temperature at the same time
Temperature Control Range: -50~99 °C / -58~210 °F
Temperature Resolution: 0.1 ° C / 0.1° F
Temperature Accuracy: ±1°C (-50 ~ 70°C) / ±1°F (-58 ~ 160° F)
Temperature Control Mode: On/Off Control, Heating, NO cooling control
Input Power: 100 ~240VAC, 50Hz/60Hz
Temperature Control Output: Max. 10A, 100V ~240V AC
Relay Contact Capacity: Heating (10A, 100-240VAC)
Sensor Type: NTC sensor (Including)
Ambient Temperature: -30~ 75 ° C / -22~ 167 ° F
Temperature:-20~ 60 ° C / -4~ 140 ° F
Humidity:20~85% (No Condensate)
Body:140x68x33mm (5.5×2.7×1.3 inch.)
Socket:85x42x24mm (3.3×1.7×1 inch.)
Sensor Length: 2m / 6.56ft
Input Power Cable Length: 1.5m (5ft)
Output Power Cable Length: 25cm (1ft)
NET Weight: About 0.35kg (0.77lb)
NO Cooling,Only Heating
Warranty: 1 Year
It has certificate of EMC, LVD, RoHS, FCC compliance.
1x Temperature controller ITC-306T
1x English Manual
10. Johnson Controls A421ABG-02C A421 Series Electronic Temperature Control with Pre Wired Power Cord, -40 to 212 Degree F Temperature Range
- Electronic Single Stage Temperature Control, 120/240 VAC, UL TYPE 1, IP20, SPDT, with 12 amp power c
- Featuresa lockable front-panel touchpad for setup and adjustment, and a Liquid Crystal Display (LCD)
- Replaces the popular A419 Johnson Control model with upgraded technology.
- The A421 controls provide heating or cooling control, sensor offset, temperature setback, adjustable
- In stock – Ships FAST!
The Johnson Control’s A421 digital temperature controller is great for the brewers kegerator or keezer. You can use this to keep your beer or wine at exactly the temperature you like it. Excellent for fermenting lagers as well. The A421 Series controls are single stage, electronic temperature controls with a single-pole, double-throw (SPDT) output relay. The controls feature an adjustable backlit LCD for viewing the temperature and status of other functions, and a three-button touchpad for setup and adjustment. An LED indicates the On/Off status of the output relay. The A421 control is 120 VAC. The A421 controls provide heating or cooling control, sensor offset, temperature setback, adjustable anti-short cycle delay, and a restricted user adjustment mode. The temperature units can be displayed in °F or °C. The temperature adjustment range is -40 to 212°F or -40 to 100°C. The A421 automatically changes from heating and cooling.
By our suggestions above, we hope that you can found Thermostatically Controlled Reptile Heating Device for you.Please don’t forget to share your experience by comment in this post. Thank you!