Finding your suitable readers for swamp cooler motor 3 4 hp is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best readers for swamp cooler motor 3 4 hp including detail information and customer reviews. Let’s find out which is your favorite one.
546 reviews analysed
1. Rectorseal 68114 Refresh Evaporative Cooler, A/C Humidifier Tablets-4 Tablet Tube
Description
Product Description
Refresh Tablets eliminate growths and odors in evaporative coolers, humidifiers, and air conditioners, improving efficiencies, and reducing maintenance and power costs. Refresh Tablets are EPA-Registered, self-metering dosage tablets which are added directly to reservoirs or drain pans. EPA Reg. No. 51219-1.
From the Manufacturer
Refresh Tablets eliminate growths and odors in evaporative coolers, humidifiers, and air conditioners, improving efficiencies, and reducing maintenance and power costs. Refresh Tablets are EPA-Registered, self-metering dosage tablets which are added directly to reservoirs or drain pans. EPA Reg. No. 51219-1.
2. Portacool PARPACHWTB00 Hard Water Treatment
Description
The Portacool PARPACHWTB00 Hard Water Treatment Kit, Four (4) applications per kit, is specially formulated to keep your Portacool portable evaporative cooler running efficiently. Use as directed. Portacool portable evaporative coolers entered the marketplace in 1990 offering the first version of an evaporative cooler designed to provide economical, effective cooling where ever it was needed. More than twenty-five years later, the company’s consistent growth rate and continued expansion in product lines has positioned it as a global leader in the portable evaporative cooling business. Portacool — When Comfort Counts.
3. A.O. Smith SQ1102 1 HP, 3450 RPM, 1.65 Service Factor, 48Y Frame, Capacitor Start, ODP Enclosure, Square Flange Pool Motor
Description
SQ1102 SQ1102
4. Dial Evaporative Cooler Purge Pump, Model 1541
Feature
- Voltage: 115V
- Mineral and scale purge pump eliminations system
- Installs alongside regular cooler pump to automatically flush dirty water from evaporative cooler after every 8 hours of operation
- Prevents scale and mineral build up
- Includes mesh screen, mounting bracket, drain hose and drain adapter
Description
The best way to keep your cooler clean has always been to install a bleed-off system which drains off a percentage of water while the cooler is in operation. Power-Clean will save money and conserve water by automatically flushing your cooler clean every 8 hours of existing cooler pump operation. Once installed in the pan of the cooler, Power-Clean automatically cycles every 8 hours of cooler pump operation to empty the water and replenish the cooler with fresh water. The cooler capability is never interrupted. Replacing the cooler water on a regular basis is beneficial by removing mineral scale build-up and bacterial growth. Power-Clean eliminates the need for a bleed-off and the use of cleaners or harsh chemical additives. Voltage: 115V Mineral and scale purge pump eliminations system Installs alongside regular cooler pump to automatically flush dirty water from evaporative cooler after every 8 hours of operation Prevents scale and mineral build up Includes mesh screen, mounting bracket, drain hose and drain adapter For use with residential and commercial roof-top and window-mount coolers Motor has thermal overload protection and a flame-retardant housing for safety Regular pump attaches to the purge pump to activate the timer.
5. KeeYees L298N Motor Drive Controller Board Stepper Motor Control Module Dual H-Bridge with DC Motor and Smart Car Wheel Compatible with Arduino
Feature
- This is a good parts kit for an Arduino and raspberry pi based RC car project. It not only comes with 4pcs wheels and motors, but also 2pcs motor drive modules and 60pcs jumper wires, which are very useful accessories for your project.
- Motor Drive Controller: L298N used as the main driver chip. It has the strong driving ability, low calorific value and strong anti-interference ability.
- TT Motor: The motor is a two-axis motor with a reduction ratio of 1:48, which has strong anti-interference ability.
- Smart Car Wheels: The wheels are made of high-strength plastic and the tires are made of durable black rubber.
- To avoid damage the voltage stabilizing chip of Motor Drive Module, please use an external 5V logic supply when using more than 12V driving voltage.
Description
Specification:
Motor Drive Module
Operating mode: H-bridge driver (dual)
Chip: L298N
Logic voltage: 5V
Logic current 0mA-36mA
Drive voltage: 5V-35V
Drive current: 2A (MAX single bridge)
Maximum power: 25W
Dimensions: 43x43x27mm
Note:
General Application:
When your driver is 7V-12V (Marked as 12V Input), you can use the on-board 5V logic supply.
When using the on-board 5V power supply, do not input voltage at interface 5V Input, but it can
draw 5V voltage for external use.
Unconventional application of high-voltage drive:
When the driving voltage is higher than 12V, less than or equal to 24V. First, the onboard 5V
output enabled jumper cap must be removed, and then connect the 5V external voltage to the
5V Input interface to power the L298N internal logic circuit.
DC Motor
Operating Voltage: 3V ~ 6V DC
Reduction ratio: 1:48
When the voltage is 6V:
No-load current: ≤200mA
No-load speed: 200±10%rpm
When the voltage 3V:
No-load current: ≤150mA
No-load speed: 90±10%rpm
Product List:
4 x Smart Car Wheel
4 x DC Motor
2 x L298N Motor Drive Controller Board
20 x 20CM Jumer Wire female to female
20 x 20CM Jumer Wire Male to Male
20 x 20CM Jumer Wire Male to Female
KeeYees: Best choice in various Electronic Modules & Components, DIY Parts and Tools to
support your work and design challenges from Home, School to Industrial applications!
6. OEMTOOLS 23976 3,100 CFM 3 Speed Evaporative Cooler, 3100, Gray
Feature
- 1/5 HP 3 speed motor. Cooling area. : 950 sq. Ft.
- Oscillating design allows broad area coverage, increased cooling and added comfort
- Patented axial propeller is energy efficient, quiet, and throws cool air farther.
- Molded with UV resistant polypropylene resin, creating a strong yet lightweight design suitable for outdoor use. Gfci plug.
- Direct-connect-to-hose feature enables constant water supply option to Avoid having to fill water tank. Water capacity: 10. 3 gallons
- 3100 CFM
Description
The OEMTOOLS 3, 100 cfm evaporative cooler is compact in size, but it out-performs coolers that are much larger. It is energy-efficient, quiet, and throws cool air farther. Three XEL50 media panels (instead of a single panel found on most mobile coolers) provide more air-intake area and reduce pre-rotation of the air to the propeller, which translates into lower static pressure and more efficient air delivery to the propeller. The 3 high-density media panels provide 80% more evaporation surface than regular density media, ensuring higher evaporation efficiency and longer life Plus maximum cooling for up to 950 square feet. Evaporative coolers are not Air conditioners, thus they use much less energy – and you save more on electricity costs!
7. Little Giant 540005 CP1-115 1/70 Horsepower Evaporative Cooler Pump
Description
Product description
LITTLE GIANT EVAPORATIVE COOLER PUMPDesigned for reliability in recirculating applications as replacement units for orginal equipment. For use in evaporative coolers, displays, laboratories, water transfer and other applications.
- Heavy Duty Concentric Fan-cooled Motor
- Thermal Overload Protection
- Corrosion-resistant One-piece Steel Motor Shaft
- Universal Mounting Configurations
- Moisture-proof Windings
- Oversized Sleeve Bearings with Large Oil Reservoir
- 90 Degree Barbed Elbow with Bleed-off
- Low Pump Down and Recovery Levels
- Grounded Plug
- For coolers up to 6500 CFM
- Flame Retardant Housing
- Snap-off Volute Plate for Easy Cleaning
- Mesh Debris Screen
Specifications :
- Horsepower – 1/70
- Flow – 25 – 250 GPH @ 1′
- Cord Length – 3′
- Shut Off – 9.5′
- Voltage – 115/127
- Hertz – 60
- Amps – .9
- Watts – 65
- Weight – 2.5 Lbs.
- Height – 9
- Width – 4.5
- Length – 4.5
From the Manufacturer
Designed for reliability in recirculating applications as replacement units for orginal equipment. For use in evaporative coolers, displays, laboratories, water transfer and other applications.
1/70 HP, 307 GPH at 1-Inch, 115/127V. Includes a 4-Feet power cord.
8. Dial Manufacturing 1175 7500CFM UL STANDARD PUMP
Description
Noncorrosive, flame-retardant motor housing, removable base plate, built-in pump screen, built-in optional bleed-off port. Auto reset thermal overload, permalube bearings, extra long cord, molded 3-prong plug, heavy-duty motor. 120V. UL listed.
9. Dial Manufacturing 5255 Fresh Air Deodorizer
Description
Dial Manufacturing 5255 Fresh Air” Deodorizer
10. Dial Industrial Pump 230 V 505 Gph City Of Los Angeles Approved, Ul Black
Description
Material: Plastic. Maximum CFM: 12 – 21000 cfm CFM. Height: 8-1/2 in. Width: 4-1/5 in. Voltage: 230 volts. Depth: 4-1/5 in. Gallons per Hour: 505 gph gph. Part Type: Pumps. Compatibility: City Of Los Angeles Approved. UL Listed.
Conclusion
By our suggestions above, we hope that you can found Swamp Cooler Motor 3 4 Hp for you.Please don’t forget to share your experience by comment in this post. Thank you!
