Top 9 Sharkbite Dishwasher Connection Kit

“

Dual Compression Angle Stop
The SharkBite double stop angle supply valve controls water flow to household plumbing fixtures and allows two 3/8” outlet supply lines to be attached to a single supply valve. Designed for running two supply lines such as a dishwasher and kitchen faucet or dual vanity sink. The Angle Stop Valve is used where the water pipe enters the room to allow for easy water shut-off of to the end fixture allowing for maintenance and repair without having to turn water off to your entire home.

CUT. PUSH. DONE.
The SharkBite Connection System makes any plumbing project fast and easy with our unique push-to-connect technology. When you insert a pipe into the SharkBite quick connect fittings, the stainless steel teeth bite down and grip the pipe, while the specially formulated O-ring compresses to create the perfect watertight seal.

Our product works with your existing plumbing, is easy to disassemble for changing fittings, and can be rotated for easier installation in tight spaces. SharkBite push connect fittings are the no fuss way to fix small leaks or plumb a whole house. Whether you need to repair a broken pipe or plumb a whole house, SharkBite fittings are the push-to-connect solution for leak-free results.

“

The Sharkbite dishwasher kits contain all necessary items to install your new dishwasher the push-fit valves included in the kit work with copper, PEX, cpvc or pert pipe. All Sharkbite push-to-connect fittings can be rotated after assembly for easier installation in tight spaces.

Product Description

SharkBite1/2″ X 3/8″ Compression Angle Stop Valve We use high quality DZR Lead Free Brass for our 1/2 x 3/8 Quarter Turn Angle Stop Ball Valve. Chrome plated valve for an attractive appearance. Used where a water pipe enters a room allowing easy water shut off for maintenance, repair, installing a toilet pipe valve or faucet to your water system with no need to turn off your main supply valve. CUT. PUSH. DONE. The Shark Bite Connection System makes any plumbing project fast and easy with our unique push-to-connect technology. When you insert a pipe into the Shark Bite quick connect fittings, the stainless steel teeth bite down and grip the pipe, while the specially formulated O-ring compresses to create the perfect watertight seal. Our product works with your existing plumbing, is easy to disassemble for changing fittings, and can be rotated for easier installation in tight spaces. Shark Bite push connect fittings are the no fuss way to fix small leaks or plumb a whole house. Whether you need to repair a broken pipe or plumb a whole house, Shark Bite fittings are the push-to-connect solution for leak-free results.

From the Manufacturer

SharkBite 23036-0000LF Angle Stop 1/2-Inch X 3/8-Inch Compression Lead Free

Product Description

1/4″ x 3/4″, lead free, dishwasher elbow, Shark Bite push fit fittings for use with copper tubing cts, cpvc & PEX with integral tube liner included, constructed of ds brass, certified to 200 psi & 200 degrees Fahrenheit, design certified to ASSE1061/Nsf61 standards, meets upc, ipc & cupc requirements, fitting are listed with iapmo & are certified for use on potable & hydronic water distribution, certified for underground applications & as a manufactured joint without the need for access panels, lead free Compliant to federal law 111-380, bagged.

From the Manufacturer

SharkBite U2276LFA Dishwasher Elbow 1/4-Inch x 3/4-Inch Lead Free

SharkBite Toilet Kit with Angle Stop
The SharkBite Toilet Pipe Connector Kit has everything you need to install a toilet pipe valve. This faucet install kit includes:

• SharkBite 1/2 inch x 1/4 inch (3/8 inch OD) Push-to-Connect Angle Supply Stop Valve
• 5 foot coil of 1/4 inch PEX pipe tubing
• 1/4 inch (3/8 inch OD) SharkBite x 7/8 inch Ballcock Swivel Toilet Connector
• 1/2 inch Disconnect Clip
• 1/4 inch Disconnect Clip

CUT. PUSH. DONE.
The SharkBite Connection System makes any plumbing project fast and easy with our unique push-to-connect technology. When you insert a pipe into the SharkBite quick connect fittings, the stainless steel teeth bite down and grip the pipe, while the specially formulated O-ring compresses to create the perfect watertight seal.
Our product works with your existing plumbing, is easy to disassemble for changing fittings, and can be rotated for easier installation in tight spaces. SharkBite push connect fittings are the no fuss way to fix small leaks or plumb a whole house. Whether you need to repair a broken pipe or plumb a whole house, SharkBite fittings are the push-to-connect solution for leak-free results.

Product Description

1/4″ x 3/8″, lead free, male iron pipe, dishwasher elbow, Shark Bite push fit fittings for use with copper tubing copper tube size, cpvc & PEX, with integral tube liner included, constructed of ds brass, certified to 200 psi & 200 degrees Fahrenheit, design certified to ASSE1061/Nsf61 standards, meets upc, ipc & cupc requirements, fittings are listed with iapmo & are certified for use on potable & hydronic water distribution, certified for underground applications & as a manufactured joint without the need for access panel, lead free Compliant to federal law 111-380, bagged.

From the Manufacturer

Shark Bite push-fit fittings are the fastest, easiest way to join copper, CPVC and PEX in any combination-wet or dry-with no soldering, clamps, unions or glue. Just insert the pipe and the stainless steel teeth bite down and grip tight, while a specially formulated O-ring compresses to create a perfect seal. Disassembly is just as fast using the simple disconnect tool. So fittings and valves can be easily changed and reused. They can even be rotated after assembly for easier installation in tight spaces. Fittings certified to 200 PSI and 200-DegreeF (93-DegreeC). Design certified to ANSI/NSF-61 and ASSE 1061 product standard for use in potable water and hydronic heating water distribution. Approved to be used underground and behind walls without access panels

Product Description

CUT. PUSH. DONE. SharkBite dishwasher tube to pipe elbow, 90 degree, 1/2 inch x 3/8 inch nominal, slip x MNPT end, 200 psi working, dzr Brass, asse 1061, 200 deg F, ISO: 9001 certified, iapmo certified, nsf 61, upc/ipc/cupc Compliant, for domestic water Supply systems. The SharkBite Connection System makes any plumbing project fast and easy thanks to unique push-to-connect technology. When you insert a pipe into a SharkBite quick-connect fitting, the fitting’s stainless-steel teeth bite down and grip the pipe, while its special O-ring compresses to create a watertight seal. No soldering, no clamps, no glue. SharkBite products work with your existing plumbing, are easy to disassemble for changing and reusing fittings, and can be rotated for installation in tight spaces. Whether you need to repair a broken pipe or plumb a whole house, SharkBite provides a push-to-connect solution and leak-free results.

From the Manufacturer

SharkBite U281LFA Dishwasher Elbow 1/2-Inch SB X 3/8-Inch MNPT Lead Free

CUT. PUSH. DONE.
The SharkBite Connection System makes any plumbing project fast and easy with our unique push-to-connect technology. When you insert a pipe into the SharkBite quick connect fittings, the stainless steel teeth bite down and grip the pipe, while the specially formulated O-ring compresses to create the perfect watertight seal.

We use high quality DZR Lead Free Brass for our 1/2” x 1/2” x 1/4” 1/4 Turn Tee Stop Valve. Chrome plated valve for an attractive appearance. This SharkBite Tee Stop allows you to easily and effortlessly tap into a current or new plumbing line and run a 1/4” compression line out to an end fixture. Makes it easy to add a humidifier, dishwasher, ice maker, faucet installation or toilet installation to a new or existing line. Alternatively, can be used as a saddle valve.

Our product works with your existing plumbing, is easy to disassemble for changing fittings, and can be rotated for easier installation in tight spaces. SharkBite push connect fittings are the no fuss way to fix small leaks or plumb a whole house. Whether you need to repair a broken pipe or plumb a whole house, SharkBite fittings are the push-to-connect solution for leak-free results.

SHARKBITE
SharkBite is a provider of plumbing and water control systems for domestic, commercial and industrial applications. As the world leader and hallmark of push-to-connect plumbing solutions, our goal is to continue innovating the plumbing trade with new solutions that improve efficiency and performance. Trusted by plumbing professionals, SharkBite manufactures a wide range of plumbing fittings, water control valves and PEX pipe, making it the only total plumbing solution from meter to fixture.

SharkBite Faucet Kit with Angle Stop
The SharkBite Faucet Install Kit has everything you need to install a new kitchen faucet or sink. This faucet install kit includes:

• 2x SharkBite 1/2 inch x 1/4 inch (3/8 inch O.D.) Push-to-Connect Angle Stop Valves
• 2x 5 foot 1/4 inch PEX pipe tubing
• 2x 1/4 inch (3/8 inch O.D.) SharkBite Swivel Faucet Connectors
• 1x 1/4 inch Chrome Trim Cover that reverses as a disconnect clip to remove the pipe from the valve if needed.

CUT. PUSH. DONE.
The SharkBite Connection System makes any plumbing project fast and easy with our unique push-to-connect technology. When you insert a pipe into the SharkBite quick connect fittings, the stainless steel teeth bite down and grip the pipe, while the specially formulated O-ring compresses to create the perfect watertight seal.

Our product works with your existing plumbing, is easy to disassemble for changing fittings, and can be rotated for easier installation in tight spaces. SharkBite push connect fittings are the no fuss way to fix small leaks or plumb a whole house. Whether you need to repair a broken pipe or plumb a whole house, SharkBite fittings are the push-to-connect solution for leak-free results.