699 reviews analysed
1. Outdoor Mounting Bracket for Ductless Mini Split Air Conditioner Heat Pump Systems, Universal, 9000-36000 Btu Condenser
Feature
- Universal Heavy Duty Outdoor Wall Bracket. Fits 9000-36000 Btu Units. Dimensions: Width: 33.5″ Height: 18″ Depth: 22″
- Adjustable for use with up to 9,000 – 36,000 BTU Units not exceeding a maximum weight capacity of 350 lbs. It includes hardware and expansion bolts for wall mounting
- The use of mounting brackets raises the condensing unit above ground level for multi-floor mounting. As an alternative to ground level pads, some consumers find the use of mounting brackets useful for greater placement versatility and greater protection from dirt, snow, debris, floods, vandalism, etc.
- Cross bar, Two L-shaped brackets (foldable), Each arm has two upgraded 8.8 grade bolts with lock nuts, Wall fixation kit, Anti-vibration feet ungraded to 1 1/4 inches tall
- Slight rearward tilt to wall is recommended for safety purposes. Bracket is designed for masonry wall mount, for stud wall mount proper blocking must be made between studs to insure proper wall bracing will accommodate bracket weight load. Requires 1/2 inch (12 mm) bit.
Description
Used for supporting condensing units up to 350 pounds, this bracket features a crossbar that is attached to the wall, and two L-shaped support brackets that are hooked and bolted into place on the crossbar. The condensing unit is mounted onto the L-shaped brackets, and fastened using the bolts and anti-vibration feet provided. Please check to ensure clearance requirements are being met for your minisplit unit. The bracket is 18″ tall and the arms are 22″ long. See pictures for dimensions.
2. Daikin 12,000 BTU 17 SEER Wall-Mounted Ductless Mini-Split Inverter Air Conditioner Heat Pump System 15 Ft. Installation Kit & Wall Bracket (230 Volt) 10 Year Limited Warranty
Feature
- 10 Years Limited Warranty
- Daikin 17 SEER Wall-Mounted Ductless Mini-Split Inverter Air Conditioner Heat Pump System (230 Volt)
- Includes: Indoor Fan Coil, Outdoor Condensing Unit, Remote Control, 10 Ft. Installation Kit, and Wall Bracket
- Energy Efficient – 17 SEER, 9 HSPF.
- Coverage Area of 550 Sq.Ft. Applications: Primary living areas (master bedrooms), hot or cold rooms, renovations & remodeling, basements, attics & garages.
Description
As you think about the functionality of your home’s indoor comfort system, the Daikin brand is ready to help you achieve control, energy efficiency and long-term peace of mind. Take that attention to quality one step farther by choosing a Daikin brand energyefficient ductless split system. We have designed and engineered all of our products to provide years of consistent indoor comfort delivering you and your family premium Comfort for Life. Energy Efficient – 17 SEER, 9 HSPF, 10 Year Parts Limited Warranty and Turbo mode cools or warms up the room fast. The Daikin brand 17 Series is designed to blend in discreetly with any home design and are ideal for single rooms. Smart inverter technology integrated with an inverter variable-speed compressor, 17 Series ductless systems delivers the capacity required to maintain desired room conditions, typically reducing energy consumption (compared to traditional fixed-speed ducted systems). This technology minimizes temperature fluctuations and provides continuous cooling and heating comfort.Designed for Comfort for Life, the Daikin 17 Series units include features to ensure a comfortable experience every moment. From the wide angle louver design to the auto-swing and comfortable mode controller settings, effective heating and cooling is ensured throughout the space. Utilizing inverter technology to maintain comfort settings, Daikin systems most often operate at low speeds with indoor sound levels as low as 37 decibels (dB) and outdoor sound levels as low as 51 dB. Activate the indoor unit quiet operation and sound levels drop by 2-3 dB for gentler heating and cooling and quiet operation. Additional features: Energy Efficient – 17 SEER, 9 HSPF, Undisturbed Comfort, Advanced Filtration, Wireless Control. Applications:Primary living areas (master bedrooms and living rooms), Hot or cold rooms, Rooms with poor air flow, Renovations and remodeling, Basements, attics and garages, new construction.
3. Perfect Aire Quick Connect 36,000 BTU Mini-Split Room Air Conditioner With Heating Mode
Description
Quick Connect mini-split air conditioner system. Ideal as a primary cooling and heating source, or as supplemental solution for challenging applications. Includes indoor wall air handler, outdoor condenser, Smart Controller, Follow Me remote control, 25 foot Quick Connect line set, 25 foot 16/4 cable for connection between indoor and outdoor units. Smart controller allows user to control unit with a smart phone. Follow Me remote control can be used as a thermostat anywhere in the room. No costly ducts to install. Indoor unit dimensions: 49.57 In. W. x 14.25 In. H. x 11.10 In. D. Outdoor unit dimensions: 37.24 In. W. x 31.89 In. H. x 16.14 In. D. 16 SEER (seasonal energy efficiency ratio).
4. Mounting Bracket for 9000-36000BTU Condenser Ductless Mini Split Air Conditioner Heat Pump Systems, Rust Free Stainless Steel
Feature
- High Quality -made of solid thick stainless steel material for longer service life.
- Accurate Construction – advanced technics to ensure brackets are perpendicular to each other when condenser leveling
- Universal Design – Adjustable for use with up to 9,000 – 36,000 BTU Units not exceeding a maximum weight capacity of 360 lbs. It includes hardware and expansion bolts for wall mounting
- Raises the condensing unit above floor for protection from dirt, snow, debris, floods and other perils
- Breezy Installation & Versatility – assemble easy enough, all necessary hardware included, bracket serews and expansion screws
5. pioneer air conditioner Decorative PVC Line Cover Kit for Mini Split Air Conditioners and Heat Pumps – WYS-LCVR-KIT
Description
Finish up your ductless mini splut unit installation for a professionally installed look. Protects the line set, wiring and drainage lines from weather and other elements. Can be added on to new or existing installations. Suitable for 9000, 12000, and 18000 BTU systems. Parts included : a. Three straight lengths of 32 inches each. b. Two different types of 90 degree elbows. c. One wall cap for entry point. d. One reducer, and two couplings. e. One 20” flexible length, for condenser connection. f. One 24” flexible length. g. Plastic anchors, screws and cable ties. h. Total coverage up to 13 feet.
6. PIONEER Foldable Condenser Bracket 2P (18"L x 16"H) White
Feature
- Heavy Duty Steel Construction, Galvanized and Epoxy Painted.
- Includes all hardware for attaching the condenser plus 4 expansion bolts for wall mounting.
- 4 Rubber vibration absorbers also included.
- 4 sizes to choose from. Pick the bracket that fits the BTU output of your machine.
- Raises the condensing unit above floor for protection from dirt, snow, debris, floods and other perils.
Description
Heavy duty steel bracket, Made with ultra galvanized steel and Epoxy paint for installing mini split condensing units against the wall properly.
7. Equipment Pad for Ductless Mini Split Air Conditioner Heat Pump Outdoor Condenser Units 18x38x3
Feature
- Dimensions: 18 x 38 x 3 inches, Estimated Allowable Load 205 lbs.
- Durable and yet lightweight for standard industry applications.
- Individually engineered ribbing for optimum self-levelling ground support
- Unaffected by UV or weather. Drillable for securing unit.
- Tested per ASTM D2299 with refrigerants, synthetic canine urine, compressor oil or salt solution of 20% by volume
Description
Eco Pad equipment pads are made from injection molded plastic. Their application is mainly as a base pad for ground supported equipment. Unlike other plastic pads, Eco Pad rugged design provides uniform and generous ribbing for optimum self-leveling ground support without inserts. The pads should be installed on roughly leveled soil or ground. Eco Pad equipment pads, due to their plastic composition, are not recommended for use in applications requiring pad contact with excessive heat. Estimated Allowable Load 205 lbs.
8. Pioneer Mounting Bracket for Mini Split Ductless Air Conditioner Condensing Unit 4P (for 18000 BTU and Larger Condensers)
Feature
- Heavy Duty Steel Construction, Galvanized and Epoxy Painted.
- Includes all hardware for attaching the condenser plus 4 expansion bolts for wall mounting.
- 4 Rubber vibration absorbers also included.
- 4 sizes to choose from. Pick the bracket that fits the BTU output of your machine.
- Raises the condensing unit above floor for protection from dirt, snow, debris, floods and other perils.
Description
Mounting Bracket for Mini Split Ductless Air Conditioner Condensing Unit Large (18000 BTU and Above)
9. SIEMENS WN2060U Non-Fused AC Disconnect
Description
Product Description
Siemens WN2060U Non-Fused AC Disconnect
From the Manufacturer
Siemens 60 Amp, outdoor rated, non-fusible air conditioner disconnect is a two pole 120/240V rated pullout used as a disconnecting means for electrical equipment
10. NADACS Universal Mini Split Wall Bracket and MOUNTING Hardware 3PC+ Hardware for Mini Split AC Condenser
Description
Mini Split AC bracket for exterior condenser. Fabricated in metal with powder coat finish for extended life. Anti-Vibration grommets to restrict noise and protect mounting feet.
Conclusion
By our suggestions above, we hope that you can found Mini Split Acheating System 36000 for you.Please don’t forget to share your experience by comment in this post. Thank you!
