Top 6 Koolance Pmp500 Liquid Cooling Pump

The Corsair Hydro x series XD5 RGB pump/reservoir Combo is ready to drive the world’s most demanding custom cooling systems. A xylem D5 PWM pump provides powerful flow rate for multi-block loops and is adjustable via PWM to maximize cooling capacity or minimize noise. Ten built in RGB LEDs, controlled adding a Corsair lighting Node Pro or Commander Pro and powerful Corsair iCUE software, provide a vibrant splash of control to customize your lighting, while an included temperature sensor gives you real-time performance data from inside your system, for accurate cooling adjustment. Universally compatible with G1/4 fittings and with both 120mm and 140mm fan mounting brackets included, The XD5 RGB pump/reservoir is the heart of your custom cooling system. Tech Support # 1-888-222-4346 opt #1

Description:

– Model:SC-300T
– Flow:max 300L/h
– Head:max 1.9 meters
– Power Connector: Small 3P connector
– Voltage:DC12V
– Power: 4W
– Water tank capacity: 150ml
– Noise:23DB
– Dimensions:Length 66mm * wide 56mm * height 86mm (net size, excluding out of faucets, shock absorber)
– Tap Diameter:9.4 mm

Features:

– LED power indicator to indicate power-on state
– Control circuit,the pump is more stable
– Tap out the instructions marked
– Small 3P power connector can be directly plugged into the headboard fan original position
– Support speed testing function
– With rubber shock absorber base,ultra-quiet experience.（Tips:It is good to use the pipe with 8MM inner diameter）

Package included:

– 1pcs ultra-quiet Water pump

The Glacier R160C is a combo reservoir from Phanteks designed for the DDC pump. The redesigned R160C now comes with a transparent backplate which creates a more spacious look and delivers immersive lighting experiences with the integrated Digital-RGB solution. With its design and universal 120/140mm fan bracket, the R160C offers for an easy installation with multiple mounting options.

EK-XRES 140 SPC PWM Classic RGB – Plexi (incl. pump) is a value-oriented water cooling pump-reservoir combo. It has been designed to be an entry class combo solution that is able to offer great hydraulic performance complemented with RGB LEDs for modern aesthetics. The combo unit comes with a 120mm fan mount holder included.

The core of the unit is the EK-SPC 60 water pump that uses only a 4-pin PWM FAN header for operation. No other additional connector is required! Full PWM support will allow you to set automatic pump speed regulation depending on your temperatures. Full performance on demand or whisper-quiet operation in idle mode! With a maximum head pressure of 2.2m (7.2ft), and maximum flow of 250L/h and a very compact form

The EK-XRES 140 SPC PWM Classic RGB – Plexi (incl. pump) series pump-reservoir combo comes with a pre-installed anti-cyclone insert.

The main body features two G1/4“ threaded ports of which one is an inlet (in the reservoir) and one is an outlet (from the pump). The reservoir tube is made of a quality acrylic material.

Model: 3831109813744

Specifications:
Product type: Computer Water Pump
Rated current: 0.7A
Rated power: 8W
Pump head: 3.5 meters
Pump flow: 800L/H
Starting voltage: 7V
Voltage: 13.5V
Thread: G1/4 thread
Package size: 10 x 8 x 8 cm/ 3.94 x 3.15 x 3.15 inch

Package List:
1 x Computer Water Pump
1 x Mat

The Alphacool Eisstation reservoir is extremely compact Each pump is installed in the bottom of the Eisstation and is not visible from the outside. The bottom of the Eisstation is a metal plate that reduces vibrations and increases the stability of the Eisstation. Mounting possibilities The installation options are numerous and comprehensive. The Eisstation can be screwed onto a 2.5 SSD bracket. It can also be mounted in a 5.25 bay. In either case, the special decoupling screws included with the Eisstation are used for mounting it. This minimises the transfer of vibrations to the case, lowering the operating volume significantly. Another installation option is the included Velcro fastener. One part of the Velcro is glued to the bottom of the Eisstation, while the other part is glued to the case. Then all thats left is to press the Eisstations bottom against the corresponding Velcro on the case. The size of the Velcro ensures secure positioning even during transport. The Eisstation can be mounted vertically or horizontally, depending on personal taste and available space. Connection possibilities There are four possibilities for connection. An IN and an OUT with G1/4 threads are located on the top, with the illuminated logo. The logos colour can be changed with the optional modding kit. In the cap, there is one G1/4 and one G3/8 connection available. The G3/8 connection, with its larger size, simplifies filling the Eisstation and can also serve as a lighting module for 5mm LEDs. Two additional 5mm LED places can be found in the bottom of the reservoir and illuminate the water-filled portion from below. CAUTION Removing the impeller from the ceramic shaft will cause the upper ceramic clamping ring to over-expand, which will destroy it! Removal will void the pumps warranty!