The Best House Central Vacuum

Includes 2 Central Vac White Inlet Valve Round Door Covers Fits Beam Central Vac units Low Voltage Connections for starting the vacuum power unit Most Common inlet valves used Inlet opening measures 1.5“ and has 2 electrical contacts inside the port Please contact us with any questions or to confirm fit

The 93367 is designed to complement all major central vacuum systems and is an ideal set of accessories for those concerned about black tools marking surfaces. The 1.25 inch inner diameter commercial grade vacuum hose is highly flexible with a smooth interior for superior airflow. Cen-Tec’s trademarked arc relax strain relief system covers the last 14 inches of each end of the hose and prevents kinking increasing hose life. The premium combination nozzle has a wheel system, metal base plate, and pivoting swivel neck that keeps the tool parallel to the surface of the floor for superior vacuuming. A five-piece accessory set with natural fill dusting and natural fill upholstery tool is ideal for all above the floor surfaces. The 93367 is lightweight, making it ideal for cleaning above the floor surfaces, stair risers, while reducing fatigue. The 93367 is designed to be compatible with all major central vacuum brands including: Beam, Electrolux, Eureka, Vacumaid, Vacuflo, MD, Cyclovac, Canavac, Honeywell, Galaxie, Imperium, and Nutone installed with valves that have approximately a 1.50 inch industry standard opening.

Large capacity hybrid (with or without bags) central vacuum power unit, perfect for large households, covers up to 9000 square feet. Powerful 700 airwatts 2-stage motor with soft-start, soft-stop technology (motor lasts 20% longer) with 32L/9.25 Gal canister. quiet: as noisy as an regular air conditioner. The cyclonic filration combined with the permanent machine washable filter purifies the vacuumed air up to 99.97%. the triple layer filtration bag permits to conveniently dispose of the waste in the dirt receptacle without harmful airborne dust.

The 93059 kit has a two position on off switch hose which creates a Circuit through the two low voltage electrical contacts in your inlet valve. You will see the wall end has a two metal contact Plates separated by a thin plastic landing. These Plates create the Circuit through the switch in the hose handle that permits control of your central vacuum. There is a small tab projecting from the top of the hose end that helps you orient the hose in your inlet. This tab should be located at the top of the inlet valve opening as you insert the hose end. The wave combination nozzle is designed to move from carpets to hard floor without the need to make an adjustment. There is a simple friction connection between the floor nozzles and the end of the telescopic wand to make changing tools easier. The wand ratchets at one inch intervals from 25 to 42 inches so you can adjust to a height comfortable for your use. Many find the 93059 an ideal second package to complement their electric brush kit for the portion of the home dominated by hard floor surfaces like the kitchen, family room, den, or basement. An Italian made ratchet chrome telescopic wand with nylon collar and a full set of soft vinyl accessories are ideal for cleaning above the floor. The accessories include a 5 inch natural fill dusting tool, a 13 inch vented crevice tool, and 5 inch upholstery tool with a built in brush strip ideal for stairs and the sofa, a mesh caddy bag collects everything between uses and the mesh allows you to easily see the tool you need through the bag.

The 34498 chromed steel telescopic wand features a nylon ring collar, home to a female friction and male friction fits. The 34498’s compressed length is 23.5″ (597mm) and extends to 39″ (990mm). NO LOCKING BUTTON The versatility of a telescopic wand should be obvious – it allows the user to do above the floor cleaning and adjust the height to the operator and the job.

The 37737 is a premium nozzle for both hard floor and carpeted surfaces. The tool is virtually silent when moving across hard floor surfaces due to the oversized wheel located just under the double pivot neck. The neck pivots first at the tool and then at the neck base to insure maximum cleaning performance. The 37737 is compatible with all canister vacuums, commercial back pack vacuums using 1.25” accessories, and all major brands of central vacuum including Beam, Electrolux, Vacumaid, Cyclovac, MD, Vacuflo, Canavac, Nutone, Eureka, and Imperium. To confirm the 37737 consider the nozzle end of your wand or extension tube. If it has a connection without a button and measures approximately 1.1/4” on the outside surface, it should be compatible. The 37737 is not compatible with several brands of European vacuums like Miele which require a 1.375” neck.