Top 10 Heating Vent Registers

HVAC Premium has been providing superior in quality service for many many years. Our products are second to none, and we’ve helped numerous contractors, DIY projects,
and home improvement remodeling specialists complete their masterpiece. If you are looking for a top of the line unit to enhance your project look no further than HVAC Premium.
We have the largest selection of Grilles Registers & Diffusers.

Overall Size: MEASURE the size of the DUCT OPENING. Do not measure the old vent cover. If your duct opening is 14″ wide by 20″ tall, order a 14×20.

Height vs Width

The first number in a register grille size represents the width, the second number represents the height.

Example: If your duct opening is 14″ wide by 20″ tall, order a 14×20.

This solid stamped steel register vent grille will provide your home with ideal and quiet, rattle free airflow and ventilation for your air-conditioning and heating system
as well as smooth opening and closing back dampers. The back dampers are adjusted by the lever at the front of the register so that you can easily control the air flow
of your HVAC system. You can install this register supply grille on the ceiling or on the sidewall. The installation is simple, just screw the grille on to
your wall with the screws that are included and that’s it!

100% Satisfaction Guaranteed

Don’t worry, you’re covered by our 100% moneyback guarantee no questions asked. Click Add to Cart Now! and enjoy a new updated refreshing look to your home.

Introduction
The Home Intuition simple yet extremely useful Heat and Cold Air Deflector is the perfect way to keep your room temperature evenly heated or cooled allowing for better airflow and not getting stuck in the seat that gets hit directly by your vents! This Vent deflector works great for 10″-14″ wide in all locations, floor, wall or ceiling. This deflector is used as an attachment to a central heating and cooling system.

Features
The Air Deflector is super easy to install. Simply place the deflector up against a metallic air vent that supports magnets and adjust the width by sliding back and forth. It is made of heavy duty clear plastic and is held in place with magnets so it’s as easy as can be.

Product Satisfaction
Our combination of high grade material and low cost help deliver a product that’s long lasting and dollar friendly. With our product satisfaction guarantee you can shop at ease knowing that well have your back so what are you waiting for? Pick yours up today.

Well-designed HVAC Register to blend in Your Quiet and Free of Draught place. Our Air Registers Bring Rooms a Fresh, Energizing Indoor Climate without disturbing you in your daily life.

Please note Max recommended Airflow for this air terminal is 290 cfm (140 l/s). Higher airflows may result in noise. 

Specification

– 14″ x 6″ [250x150mm] – Penetration Dimensions / Duct Connection

– 16″ x 8″ [400x200mm] – Air Terminal Face Area

– High Quality Welded Steel Construction, Robust, Scratch Resistant and Smooth Surface, No Sharp Edges

– Complete with Volume Control Damper

– Wrapped and Packed in a Box to prevent any damage 

Easy To Install

The Air Grille is suitable for any system (Heating or Air Conditioning) as a Supply Air Sidewall Register, Ceiling Diffuser, Return or Extract Air Grille. Easy to install in wall, ceiling or directly on the duct.

Adjustable Diffusion Pattern = INCREASED COMFORT

Opposed Blade Damper (VCD) and Multi-Angled Rolled Fins allow Best Air Distribution Control. 

100% Satisfaction

Since our aim is to provide fresh air indoors, Engera supply high-quality products only. We are proud and confident to offer You a LIFETIME WARRANTY. We provide refunds with no questions asked! Add to Cart Now and do not worry about a thing!

Rocky Mountain Goods 4″ x 10″ Floor Vents 2 Pack comes with two heavy duty floor registers made to fit 4″ by 10″ duct openings. While many floor grills look the same, our floor registers are made with high grade steel for heavy duty use. The premium matte finish is double coated to ensure the color for its lifetime of use. The easy adjust levels allows quick change of flow rate and can even been done with your foot. This floor resister is made to fit a 10 Inch by 4 Inch HVAC hole. The actual floor register outer dimensions are 5.5” by 11.5”. Like all Rocky Mountain Goods products this floor vent comes with a lifetime warranty.

10″w X 6″h ADJUSTABLE AIR SUPPLY DIFFUSER – HVAC Vent Cover Sidewall or Ceiling – Grille Register – High Airflow – White [Outer Dimensions: 11.75″w X 7.75″h]

10″w X 6″h Is The Size For The Duct Opening Measurement Only Actual Front End Frame Outer Dimensions Are 11.75″w X 7.75″h – SEE BELOW IN DESCRIPTION HOW TO MEASURE A GRILLE

You may think of grilles and registers as a generic component of the ventilation system in your house.
But they are also the most visible representation of you air system.
These grilles and registers give you an extra measure of quality that you can point out to your family members and house guests.
Some of our best features aren’t readily apparent, but you’ll appreciate the benefits over a long period of time.
This grille has a high standard of design, production and finish on all products.

Every part is hand inspected for quality before it is packaged, no exceptions.
Quality Packaging – Carefully Shrink Wrapped With Cardboard Backing To Prevent Damage In Shipment
Easy Unrestricted Air Flow.

How To Measure A Grille
Overall Size:
Measure the size of the air duct/drywall opening. Do not measure the overall size of the register itself, only measure the “”hole”” in the wall/duct. Every grille has a front end frame, that will overlap at wall joint.
Total outer size of this grille is; listed size +1.875″” at the width, and + 2″” at the height.

Width vs Height
The first number in a grille size, represents the width, the second number represents the height. Example: If your hole is 20″” wide by 14″” tall, order a 20×14. If your hole is 14″” wide by 20″” tall, order a 14×20.

100% Satisfaction Guaranteed

Don’t worry, you’re covered by our 100% moneyback guarantee no questions asked. Click Add to Cart Now! and enjoy a new updated refreshing look to your home.

Accord Ventilation model ABBBWH24 is a white, 24-Inch(Duct Opening Measurement), baseboard register with a sunburst design. To determine the correct size to order, measure the size of the duct opening (not the old vent itself). Each Accord Ventilation product is crafted using high quality materials that provide strength and durability. Accord Ventilation produces floor registers, grates, and vents in a variety of designs and sizes. Accord Ventilation products are sure to enhance any home decor. Our Lifetime Limited Warranty covers every floor register, vent, grate, and grille manufactured by Accord Ventilation.

Product Description

This 8-pack of Decor Grates 4-Inch by 12-Inch scroll floor register has a brushed nickel finish (2mm metal). Decor Grates floor registers are built with the finest materials. Each and every register goes through a quality assurance process to ensure your satisfaction. Our classic designs will enhance any rooms decor and give you years of trouble free operation. Our family owned company takes great pride in making sure you are totally satisfied with your purchase.

From the Manufacturer

This Decor Grates 4-Inch by 12-Inch scroll floor register has a brushed nickel finish (2mm metal). Decor Grates floor registers are built with the finest materials. Each and every register goes through a quality assurance process to ensure your satisfaction. Our classic designs will enhance any rooms decor and give you years of trouble free operation. Our family owned company takes great pride in making sure you are totally satisfied with your purchase.

Accord Ventilation model AMFRRBC412 is a Dark Oil-Rubbed Bronze, 4-Inch x 12-Inch(Duct Opening Measurements), Floor Register with a Charleston Design. To determine the correct size to order, measure the size of the duct opening (not the old vent itself). Each Accord Ventilation product is crafted using high quality materials that provide strength and durability. Accord Ventilation produces floor registers, grates, and vents in a variety of designs and sizes. Accord Ventilation products are sure to enhance any home decor. Our Lifetime Limited Warranty covers every floor register, vent, grate, and grille manufactured by Accord Ventilation.

Most floor registers look the same in pictures but no floor register is made with as much quality as the Rocky Mountain Goods 4-Inch by 10-Inch Floor Register. This quality is manifest in the high grade metal used which allows for walking on this floor register. The premium matte white finish is double coated to ensure the color for its lifetime of use. The easy adjust levels allows quick change of flow rate and can even been done with your foot. This floor resister is made to fit a 10 Inch by 4 Inch HVAC hole. The actual floor register outer dimensions are 5.5” by 11.5”. Like all Rocky Mountain Goods products this floor vent comes with a lifetime warranty.

Commonly used in RV's & Mobile Homes Drop-in style with mounting holes. 1/2" inched spaced rolled fins. Opposed blade dampers. Wheel operated adjustment. Floor hole size 4" x 10". Flange size 5 1/2" x 12 1/8" Also available in White. Also available in 4'' x 8"