Top 10 Heating Element Samsung Dryer Dv42h5000ewa3

0
546 reviews analysed

1. DC97-14486A Dryer Heating Element Assembly Replacement for Samsung Includes DC47-00019A Heater Element, DC47-00018A Thermostats DC96-00887A Thermal Fuse Replace DC97-08891A DC9714486A DC97-14486D

DC97-14486A Dryer Heating Element Assembly Replacement for Samsung Includes DC47-00019A Heater Element, DC47-00018A Thermostats DC96-00887A Thermal Fuse Replace DC97-08891A DC9714486A DC97-14486D

Feature

Description

The instructions work for most Samsung dryers, some may have some small differences. Here is how to replace the DC97-14486A heating element:

STEP1: Shut off the power to the dryer before working on it.
STEP2: Remove the two screws securing the top panel to the back of the dryer. Slide the top panel towards the back of the dryer to remove. You will need to remove the front control panel, some model have screws securing this. Remove them and pull up to remove, you should have enough extra wire to set the control panel on top of the dryer to get it out of the way. if not, then disconnect the wires and set it off to the side. Behind where the control panel was there will be four screws that secure the front panel of the dryer to the frame. Remove these four screws.
STEP3: Open the door of the dryer, there will be two screws that need to be removed at the bottom of the door frame area. With those two screws removed you should be able to tilt the front panel forward, remove the connector to the door switch, and remove the front panel.
STEP4: The heating element is located on the bottom right side of the dryer. To remove the element you will need to remove the wires to the heating element, thermal fuse, and thermostat. Then remove the mounting screw in the front and the whole heating element assembly should pull out the front of the dryer.
STEP5:To re-install the heating element you will need to put everything back in the reverse order. To test the heating element, you will need an Ohm meter or multi-meter. A good heating element should read approximately 9-10 ohms. A burned out element will have an infinite resistance, it won’t register anything.

2. Eazy2hD DC97-14486A Dryer Heating Element Assembly Compatible W/Samsung Dryer AP4342351 PS4220205 DC97-08891A

Eazy2hD DC97-14486A Dryer Heating Element Assembly Compatible W/Samsung Dryer AP4342351 PS4220205 DC97-08891A

Feature

Description

Style:DC97-14486A

Eazy2hD DC97-14486A dryer heating element assembly works with the following Samsung models:

DV203AES, DV203AEW, DV206AES, DV206LEW, DV209AEW, DV210AES, DV210AEW, DV218AEB, DV218AES, DV218AEW, DV219AEB, DV219AEW, DV220AEW, DV221AEG, DV221AES, DV229AEG, DV231AEW, DV2C6BEW, DV306BEW, DV306LEW,
DV316BEC, DV316BEW, DV316HEC, DV316LES, DV316LEW, DV317AEG, DV317AES, DV317AEW, DV328AEG, DV328AER, DV328AEW, DV330AEB, DV330AEW, DV331AER, DV331AEW, DV337AEG, DV337AEL, DV337AER, DV337AEW, DV338AEB,
DV338AEW, DV339AEG, DV339AEL, DV339AER, DV339AES, DV339AEW, DV340AEG, DV340AER, DV350AEG, DV350AEP, DV350AER, DV350AEW, DV361EWBEWR, DV363EWBEUF, DV365ETBGSF, DV365ETBGWR, DV36J4000EW, DV393ETPARA,
DV393ETPAWR, DV395ETPARA, DV395ETPASU, DV395ETPAWR, DV3C6BEW, DV405ETPAGR, DV405ETPASU, DV405ETPAWR, DV407AEW, DV409AER, DV409AEW, DV409SEL, DV40J3000EW, DV410AER, DV410AEW, DV419AES, DV419AEU, DV419AEW,
DV428AEL, DV428AEW, DV42H5000EW, DV42H5200EF, DV42H5200EP, DV42H5200EW, DV42H5400EF, DV42H5400EW, DV431AEP, DV431AEW, DV433ETGJWR, DV438AEL, DV438AER, DV448AEE, DV448AEP, DV448AEW, DV45H7000EP,
DV45H7000EW, DV45H7200EW, DV45H7400EP, DV476ETHASU, DV476ETHAWR, DV484ETHASU, DV484ETHAWR, DV48H7400EW, DV501AEW, DV5451AEP, DV5451AEW, DV5471AEP, DV5471AEW, DVE45N5300V, DVE45N5300W, DVE50M7450W,
MDE6700AYW, MDE6700AZW, MDE9700AYW, MDE9700AZW, YIED7200TW, YNED7200TW

3. Endurance Pro Dryer Heat Element Replacement for Samsung DC47-00019A and Whirlpool 35001247

Endurance Pro Dryer Heat Element Replacement for Samsung DC47-00019A and Whirlpool 35001247

Feature

Description

Color:Original Version

This is a Dryer Heat Element Replacement for Samsung DC47-00019A and Whirlpool 35001247. This dryer heating element includes the insulators and restrings coil, which is already attached for easy installation. This manufacturer-approved heating element (part number DC47-00019A) is for dryers. Manufacturers’ part numbers are solely for identification. All materials supplied by us are our replacements for manufacturers’ parts. All product and company names are trademarks or registered trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.

4. DC47-00019A & DC47-00018A & DC96-00887A Dryer Heating Element And Thermostat Replacement Kit For Samsung Dryer

DC47-00019A & DC47-00018A & DC96-00887A Dryer Heating Element And Thermostat Replacement Kit For Samsung Dryer

Feature

5. Dryer Heating Element for Samsung DC47-00019A & DC47-00018A DC96-00887A DC47-00016A Thermal Fuse Kit fits DV48H7400EW/A2 DV40J3000EW/A2 DV45H7000EW/A2 DV52J8700EP/A2 DV448AEP DV419AEW DV50F9A6EVW/A2

Dryer Heating Element for Samsung DC47-00019A & DC47-00018A DC96-00887A DC47-00016A Thermal Fuse Kit fits DV48H7400EW/A2 DV40J3000EW/A2 DV45H7000EW/A2 DV52J8700EP/A2 DV448AEP DV419AEW DV50F9A6EVW/A2

Feature

Description

The instructions work for most Samsung dryers, some may have some small differences. Here is how to replace the DC47-00019A heating element:

STEP1: Shut off the power to the dryer before working on it.
STEP2: Remove the two screws securing the top panel to the back of the dryer. Slide the top panel towards the back of the dryer to remove. You will need to remove the front control panel, some model have screws securing this. Remove them and pull up to remove, you should have enough extra wire to set the control panel on top of the dryer to get it out of the way. if not, then disconnect the wires and set it off to the side. Behind where the control panel was there will be four screws that secure the front panel of the dryer to the frame. Remove these four screws.
STEP3: Open the door of the dryer, there will be two screws that need to be removed at the bottom of the door frame area. With those two screws removed you should be able to tilt the front panel forward, remove the connector to the door switch, and remove the front panel.
STEP4: The heating element is located on the bottom right side of the dryer. To remove the element you will need to remove the wires to the heating element, thermal fuse, and thermostat. Then remove the mounting screw in the front and the whole heating element assembly should pull out the front of the dryer.
STEP5: Remove assembly and replace the DC47-00019A heating element. To re-install the heating element you will need to put everything back in the reverse order. To test the heating element, you will need an Ohm meter or multi-meter. A good heating element should read approximately 9-10 ohms. A burned out element will have an infinite resistance, it won’t register anything.

6. ANTOBLE DC47-00019A Heater Element for Samsung Dryers, with DC47-00018A Thermostat DC96-00887A DC47-00016A Thermal Fuse

ANTOBLE DC47-00019A Heater Element for Samsung Dryers, with DC47-00018A Thermostat DC96-00887A DC47-00016A Thermal Fuse

Feature

Description

DC47-00019A 35001247 Deyer Heating Element has 5/16″ male terminals. It is rated 5300 Watts, 240 Volts. Replaces part numbers PS2038533, AP4201899, 35001247.
DC47-00018A Thermostat is a Limit Thermostat, 260 degrees F Thermal Fuse. Replaces part numbers PS2038383, AP4201898 and 35001092.
DC47-00016A Thermal Fuse has 1/4″ male spade terminals. Replaces part numbers PS2038533, AP4201899, 35001087, WP35001087.
DC96-00887A Thermal Fuse a High Limit Thermostat Thermal Fuse for the Heater. 320 degrees F Thermal Fuse. Replaces part numbers AP4207819, AP5966894, DC96-00887C, PS2038484, PS4276292, DC96-00887A, WP35001193, 35001193, AP6008689 and PS117418

Supported Models DV203AES, DV203AEW, DV206AES, DV206LEW, DV209AEW, DV210AES, DV210AEW, DV218AEBDV218AES, DV218AEW, DV219AEB, DV219AEW, DV220AEW, DV221AEG, DV221AES, DV229AEG, DV231AEW, DV2C6BEWDV306BEW, DV306LEW, DV316BEC, DV316BEW, DV316HEC, DV316LES, DV316LEW, DV317AEG, DV317AES, DV317AEWDV328AEG, DV328AER, DV328AEW, DV330AEB, DV330AEW, DV331AER, DV331AEW, DV337AEG, DV337AEL, DV337AERDV337AEW, DV338AEB, DV338AEW, DV339AEG, DV339AEL, DV339AER, DV339AES, DV339AEW, DV340AEG, DV340AERDV350AEG, DV350AEP, DV350AER, DV350AEW, DV361EWBEWR, DV363EWBEUF, DV365ETBGSF, DV365ETBGWR, DV393ETPARADV393ETPAWR, DV395ETPARA, DV395ETPASU, DV395ETPAWR, DV3C6BEW, DV400EWHDWR, DV405ETPAGR, DV405ETPASUDV405ETPAWR, DV407AEW, DV409AER, DV409AEW, DV409SEL, DV410AER, DV410AEW, DV419AES, DV419AEU, DV419AEWDV422EWHDWR, DV428AEL, DV428AEW, DV42H5000EW, DV42H5200EF, DV42H5200EP, DV42H5200EW, DV42H5400EFDV42H5400EW, DV431AEP, DV431AEW, DV433ETGJWR, DV438AEL, DV438AER, DV448AEE, DV448AEP, DV448AEWDV456ETHDSU, DV456EWHDSU, DV456EWHDWR, DV45H7000EW, DV45H7200EW, DV45H7400EP, DV476ETHASU, DV476ETHAWR, DV484ETHASU

7. Samsung Heating Element Dc47-00019A

Samsung Heating Element Dc47-00019A

Feature

Description

Genuine Original Equipment Manufacturer (OEM) parts! This heating element (part number DC47-00019A) is for dryers. Heating element DC47-00019A generates the dryer’s heat. Disconnect the power before installing this part. Wear work gloves to protect your hands. For Samsung & Kenmore.

8. DC47-00032A Dryer Heating Element Replacement for Samsung DC93-00154A, Include DC96-00887A and DC47-00016A Thermal Fuse, DC47-00018A Dryer Thermostat

DC47-00032A Dryer Heating Element Replacement for Samsung DC93-00154A, Include DC96-00887A and DC47-00016A Thermal Fuse, DC47-00018A Dryer Thermostat

Feature

Description

DC47-00032a Dryer Element Compatible with Samsung

SPEC:

– This is the element located in the DC97-00154A kit(Replaces DC93-00154A but without outer shell) 

– 240 volts and 3700 watts. 

Also Replaces: 35001092 503497 AP4201898 AP6008682 PS4205217 PS11741822.

Suitable Models:

DVE45M5500P, DVE45M5500W, DVE45M5500Z, DVE45R6300C, DVE45R6300V, DVE45R6300W, DVE52M7750V, DVE52M7750W, DVE52M8650V, DVE52M8650W, DVE54M8750V, DVE54M8750W, DVE55M9600V, DVE55M9600W, DVE60M9900V, DVE60M9900W

4 Pcs Package Include:

– DC47-00032ADryer Heating Element:

Upgrade version, metal is thicker than others that it ‘s more heat resistant and longer service life.Save your energy and money

– DC47-00016A Thermal Fuse:

cut off power to the dryer if the dryer overheats

– DC96-00887A Thermal Fuse:

cut off power to the dryer if the dryer overheats

– DC47-00018A Thermostat:

DC47-00018A will cut out at 260 degrees and cycle back on once the internal temperature drops by 50 degrees

【Note】 These dryer replacements are compatible spare parts (not original), the mention of brand names and any related model designation above is only for purposes of demonstrating compatibility.

9. Dryer Heating Element Exact fit for Samsung DV40J3000EW/A2-0000, Samsung DV448AEE/XAA-0000, Samsung DV209AEW/XAA-0001 Dryers by EnjoyShop777

Dryer Heating Element Exact fit for Samsung DV40J3000EW/A2-0000, Samsung DV448AEE/XAA-0000, Samsung DV209AEW/XAA-0001 Dryers by EnjoyShop777

Feature

10. Samsung DC92-01596D Dryer Electronic Control Board Genuine Original Equipment Manufacturer (OEM) Part

Samsung DC92-01596D Dryer Electronic Control Board Genuine Original Equipment Manufacturer (OEM) Part

Feature

Conclusion

By our suggestions above, we hope that you can found Heating Element Samsung Dryer Dv42h5000ewa3 for you.Please don’t forget to share your experience by comment in this post. Thank you!

Home Previews
Logo
Enable registration in settings - general