Top 10 Ge Thhql Breaker

1 Pole, 20 Amp;Type THQL for use in General Electric load centers;Thick series, requires one 1-inch space

Product Description

General Electric THQP120 Circuit Breaker, 1-Pole 20-Amp Thin Series

From the Manufacturer

This 120 volt GE 20 amp, single pole, thin series replacement circuit breaker is used in a General Electric load center. Typical applications, up to 2,200 watts, include kitchen circuits, branch circuits, wall receptacles, electric heaters (up to 1,650 watts), dishwashers, refrigerators, freezers, washing machines, window air conditioners (110V, up to 5,500 BTU) and electric motors (3/4 hp to 1-1/4 hp). These are only suggested applications and cannot assure compliance with all local codes. Please check local electrical codes before starting any electrical project.

Product Description

GE, 20a, double pole circuit breaker, 240V, bulk. The product is good to use. The product is highly durable. Manufactured in china.

From the Manufacturer

This 120/240-Volt GE 20 amp, double pole, thin series replacement circuit breaker is used in a General Electric load center. Typical applications, up to 8,800-Watt, include electric baseboard heat, fan forced heat and 240-Volt air conditioners (up to 23,000 BTU). These are only suggested applications and cannot assure compliance with all local codes. Please check local electrical codes before starting any electrical project.

Product Description

Siemens space saving, plug in circuit breakers are intended for use in Siemens EQ, Siemens Ultimate, ITE, and Gould load centers and meter combinations that are rated to accept type QT breakers. Check wiring diagram to confirm. To ensure the warranty on a Siemens panel is not voided, the use of Siemens breakers is required. The quadplex breakers provide two double pole breakers in half the space of standard sized breakers. These triplex, 1/2-Inch frame breakers are ideal when new circuits are required in a panel that has no available spaces. Siemens strongly recommends against the use of “used” breakers. The installation of used breakers in a Siemens panel will void the warranty on the panel. Siemens does not sell used breakers and has not approved any 3rd party sellers to do so.

From the Manufacturer

SIEMENS space saving, plug in circuit breakers are intended for use in SIEMENS EQ, SIEMENS Ultimate, ITE, and Gould load centers and meter combinations that are rated to accept type QT breakers. Check wiring diagram to confirm. To ensure the warranty on a SIEMENS panel is not voided, the use of SIEMENS breakers is required. The quadplex breakers provide two double pole breakers in half the space of standard sized breakers. These triplex, 1/2-Inch frame breakers are ideal when new circuits are required in a panel that has no available spaces.

Product Description

General Electric THQL2120 Circuit Breaker, 2-Pole 20-Amp Thick Series

From the Manufacturer

This 120/240 volt GE 20 amp, double pole, thick series replacement circuit breaker is used in a General Electric load center. Typical applications, up to 8,800 watts, include electric baseboard heat, fan forced heat and 240 volt air conditioners (up to 23,000 BTU). These are only suggested applications and cannot assure compliance with all local codes. Please check local electrical codes before starting any electrical project.

GE Molded Case Circuit Breaker, Ground Fault, Series: Q-Line, 120/240 VAC, 20 A, 10 kA Interrupt, Instantaneous Trip, 2 Pole, 1 Phase, Plug-In

Single pole ground fault circuit interrupter circuit breaker. Type THQL, 1″ module. 120 240V. UL listed. No. THQL1120GF: 20A No. THQL1130GFP: 30A

THQL2120GF1 thql 20 amp plug in gfi circuit breaker