Top 10 Ge Profile Dishwasher Clips

·  THE PERFECT REPLACEMENTS: CalPalmy offers the perfect replacement dishwasher rollers and stud for the following models: General Electric: GSM603P-45AW, 1200L02 GSM603P-35AW, 3000B10, 3000W10, GSM603P-25AW Kenmore: 3631401591, 3631401191, 3631401590, 3631401890, 3631401592, Hotpoint: HDA1000K02, HDA1000G00WH, HDA1000K01, HDA1000G02WH, HDA1000G20WH

Pack of 2 Dishwasher End Cap for Upper Rack Rail (Dish Rack Stop Clip) New OEM GE, Kenmore, Hotpoint

1) Turn off power to your dishwasher in breaker box (ABSOLUTELY CRITICAL TO AVOID SHOCK) 2) Rotate lower access panel fasteners and remove them 3) Remove access panel/sound dampening pad. Determine if the water supply/power lines have enough slack to move the dishwasher. If not, you will need to turn off water supply valve, disconnect water supply line from inlet valve & release power line from junction box 4) Open dishwasher door, remove the screws from the existing brackets (if present) 5) You will next be moving the dishwasher. To do so, you may need to lower the dishwasher by adjusting the leveling legs 6) Carefully pull dishwasher a few inches away from the front of the cabinet 7) Use pliers to pull up tabs in back of the bracket (if present). Pull out old brackets 8) Insert new brackets. Use pliers to adjust the back tab to lock the brackets in place 9) Slide the dishwasher back into the cabinet (readjusting the leveling legs, if necessary). Replace the screws in your new brackets 10) Reverse steps 3, 2 and 1. ALL SET! This is a generic product manufactured and distributed by Impresa Products (TM). This is not a Whirlpool (TM), Sears (TM), Kenmore (TM), Amana (TM), Jenn-Air (TM), Crosley (TM), Maytag (TM), Roper (TM), Magic Chef (TM), Estate (TM) or Inglis (TM) OEM product and Impresa Products has no affiliation with or endorsement from these brands. Our product is not covered under any other manufacturer’s warranty (except for Impresa Products). The Whirlpool (TM), Sears (TM), Kenmore (TM), Amana (TM), Jenn-Air (TM), Crosley (TM), Maytag (TM), Roper (TM), Magic Chef (TM), Estate (TM) and Inglis (TM) brand names and logos are the registered trademarks of their owners. Any use of the Whirlpool (TM), Sears (TM), Kenmore (TM), Amana (TM), Jenn-Air (TM), Crosley (TM), Maytag (TM), Roper (TM), Magic Chef (TM), Estate (TM) and Inglis (TM) brand names, model or any other related designations are made solely for purposes of describing and illustrating compatibility.

A dishwasher top rack slide end cap stop clip limits the range of motion for the top rack of a dishwasher. When this part fails or begins to fail, the top rack may become misaligned or extend too far and cause the dishwasher door to fail to close or remain closed. Snap off and snap on design makes for a quick and easy repair! Always take appropriate safety precautions when performing repairs.

⚠️ Use a twisting motion for proper installation and do not pry or bend the part, otherwise breakage may occur.

SPECIFICATIONS
The WD12X10136 & WD12X10277 Dishwasher Lower Rack Roller And Axle Kit helps you solve the problem with rolling the dishrack in and out. Check the existing rollers and axles for any visible physical damage. Replace the parts if the rollers or their axles are damaged. These rollers attach to the dish rack allowing the rack to roll in and out with ease.

Works with the following models: GE GDWF100V55WW, GE PDW9700J03II, GE PDW9280L00SS, GE GDWF100V50BB, GE GDWF160V50SS etc.

Replaces part numbers: WD35X21041, WD12X10261, WD12X10107.

Works with the top name brand: General Electric.

Fixes the following symptoms:
Not cleaning dishes properly.
Noisy
Door won’t close
Door latch failure

Count on our WD12X10136 & WD12X10277 Dishwasher Lower Rack Roller Kit Replacement for an unrivaled mix of durability, convenient functionality, and great value for money. Click ‘Add to Cart’ now!

If you are unsure our replacement part will fit your appliance model, you can ask us in Customer questions & answers section or contact us by visiting the Blue Stars LLC storefront — click the “Blue Stars LLC” on a product page to get to the storefront — then click the “Ask a question” link under Further Information. Select your reason, and then tell us about the question.

The GeneralElectric brand names and logos are the registered trademarks of their respective owners. Any use of the GeneralElectric brand name or model designation for this product is made solely for purposes of demonstrating compatibility.

Comparable to OEM Parts include WP8269145, 8269145, EA393134, AP3039168, PS393134, 830941, AH393134 and many more.

FIXES THE FOLLOWING SYMPTOMS:
Door latch failure.
Door won’t close.

INSTRUCTIONS:
1. Turn off the power and water supply to avoid shock.
2. Open the dishwasher door and use a phillips screw driver to remove the screws that hold the dishwasher to the cabinet.
3. Close the dishwasher door and use it to pull the dishwasher out from the counter top. You only need to pull out far enough to expose the brackets.
4. The undercounter brackets are held in by the bent tabs on the bracket that hold the bracket in place. Straighten out the tabs and slide the bracket out.
5. Slide the dishwasher brackets into the same area you removed the original brackets and bend the tabs to secure the brackets to the dishwasher.
6. Finish by carefully sliding your dishwasher back under the cabinet. Use your provided screws to screw the dishwasher bracket directly to the underside of your counter with a Phillips screwdriver.

WHAT YOU GET:
2 x Dishwasher Mounting Brackets
2 x Mounting Screws

100% CUSTOMER SATISFACTION :
Feel free to contact us if you have any questions or problems with the item

Models listed below, not all incudes: Models: General Electric PDW9280J00SS, PDW9280J00SS, PDW8280J10SS, PDW8280J10SS, PDW8280J01SS, PDW8280J01SS, PDW8280J03SS, PDW8280J03SS, PDW9280L00SS, PDW9280L00SS, PDW9880J00SS, PDW9880J00SS, ZBD6880K10SS, ZBD6880K10SS, PDW8680N00SS, PDW8680N00SS, PDW8280J00SS, PDW8280J00SS, PDW9280N00SS, PDW9280N00SS, ZBD6880K00SS, ZBD6880K00SS, PDW9980L00SS, PDW9980L00SS, ZBD6880K03SS, ZBD6880K03SS, PDW9280J10SS, PDW9280J10SS, PDW8480J00SS, PDW9700J00II, PDW9700J00II, PDW8200J10BB dishwashers
Fits for PDW8200J10BB, PDW8680J00SS, PDW8200J03BB, PDW8200J03BB, ZBD0710K10SS, ZBD0710K10SS, PDW9880L00SS, PDW9880L00SS, PDW8200J00BB, PDW8200J01WW , PDW8200J01WW, PDW9200J00BB, PDW9200J00BB, ZBD6880N00SS, ZBD6880N00SS, PDW8480J10SS, PDW8480J10SS, PDW8200J00WW, PDW8200J01BB, PDW8200J01BB, PDW8200J03WW, PDW8200J03WW, PDW8200J10WW, PDW8200J10WW, PDW9980N00SS, PDW9980N00SS, ZBD6890K00II, ZBD6890K00II, PDW8280N00SS, PDW8280N00SS, PDW8880J03SS, PDW8880J03SS dishwashers
Compatible for PDW8980L00SS, PDW8980L00SS, PDW8200J10CC, PDW8200J10CC, PDW9200J00WW, PDW9200J00WW, PDW8680J01SS, PDW8680J01SS, ZBD6800K00BB, ZBD6800K00BB, PDW8480J03SS, PDW8480J03SS, PDW8880L00SS, PDW8880L00SS, PDW9280J03SS, PDW9280J03SS, PDW9880J03SS, PDW9880J03SS, PDW8900L00BB, PDW8900L00BB, ZBD0710K03SS, ZBD0710K03SS, PDW9700L00II, PDW9700L00II, PDW8400J00BB, PDW8980N00SS, PDW8980N00SS dishwashers
PDW8600N00CC, ZBD0710N00SS, ZBD0710N00SS, PDW9700N00II, PDW9700N00II, PDW9900N00WW, PDW9900N00WW, ZBD6880K15SS, ZBD6880K15SS, PDW8400J01WW, PDW8400J01WW, PDW8600N00BB, PDW8600N00BB, PDW9800J00BB, PDW9800J00BB, PDW9900L00BB, PDW9900L00BB, ZBD6890K10II, ZBD6890K10II, PDW8200N00WW dishwashers

1) Turn off power to dishwasher in breaker box (ABSOLUTELY CRITICAL TO AVOID SHOCK) and turn off water supply. 2) Pull dishwasher out from its place. 3) Remove upper screw from side of dishwasher. Align last hole of bracket on long flat part of bracket with screw hole. Reinsert & tighten removed screw or one of new provided screws. 4) Push dishwasher back into place. Open dishwasher door. Determine which bracket hole you will use. You want to use the farthest hole forward that still attaches to cabinet. If using holes on the smaller flat part of bracket, see 5A-6A. If you need to use back hole, see 5B-9B. 5A) If using front hole, leave bracket as is. If using 2nd hole, use 1 pair of pliers to hold bracket at the 2nd hole & 1 pair of pliers to break off front tab. Repeat. Push dishwasher back into place. 6A) Pre-drill screw holes to avoid splitting wood. Screw brackets into place using provided screws. DONE! 5B) If you cannot use either of front two holes on bracket, you will need to drill a hole in the tub. Use a sharpie to mark through back bracket hole on dishwasher. Repeat. Remove both brackets. 6B) Using 2 sets of pliers, break off both brackets before bend. 7B) Drill 3/8 inch hole through each side of plastic tub. Hold plastic tightly right below mark & use a drill slowly to ensure you have a nice clean hole without damaging the tub. Clean up both holes with razor blade until smooth. 8B) Put brackets back on, put dishwasher back into place. Pre-drill small holes into the cabinet wood, then screw in included screws on each side. 9B) Insert plastic plugs in each hole. Run dishwasher & check for leaks. If leaks are present, you may need to add rubber cement to plastic plugs to create a seal. This is a generic product manufactured & distributed by Impresa Products (TM). This is not a Frigidaire (TM) / Electrolux (TM) OEM product. Any use of Frigidaire (TM) or Electrolux (TM) brand names, models, etc. are made solely to describe & illustrate compatibility.