Finding your suitable readers for desktop pellet filament extruder, production line is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best readers for desktop pellet filament extruder, production line including detail information and customer reviews. Let’s find out which is your favorite one.
575 reviews analysed
1. DISWAY 3D Printer with 200g Filament FDM DIY Printers Fully Open Source with Resume Printing All Metal Frame 220x220x250mm
- 【PATENTED TECHNOLOGY】: Upgraded extruder greatly reduces plugging risk and bad extrustion
- V-Slot with POM wheels make it move noiseless, smoothly and durable.
- 【RESUME PRINT】:If there’s a power outage, prints can be resumed from the last layer,saving time and reducing waste.
- 【HIGH PRECISION】:Using high precision imported alloy nozzle, the error is less than 0.01mm, printing effect is far better than the FDM desktop printer on the market,it even can compare with industrial instrument.
- 【EASY TO ASSEMBLE】: DC-01 comes with several assembled, you only need 10min to assemble it.It’s the best choice for beginners.Enjoying your DIY printing journey.
- 【100% FLAT HOT BED】:Extra large hand screw nut for convenient hot bed adjustment.Anyone can make it flat, very simple.We DCSW offers 18 Months warranty for any quality issue and lifetime technical support.
2. 3D Pen/3D Printer Filament,1.75mm PLA Filament Pack of 24 Different Colors,High-Precision Diameter Filament, Each Color 10 Feet, Total 240 Feet Lengths by Mika3d
- Unique 24 Colors:It comes with 3 Metal Colors, 6 Transparent Colors and 15 Normal Various Colors
- It’s Great Gift for 3D Printing
- High Qulaity:Our PLA Raw Material Imported from USA, It’s 100% New Virgin, Produced at No-Dusty Workshop, Premium Quality Controlled
- Good Performance:High Diameter Accuracy +/-0.03mm, It keeps your 3D Printing Very Smoothly and Easily
- Strong Compatibility:Universal compatible with most 1.75mm 3D Pens/3D Printers on market
- Warranty:We are Confident about PLA Filament quality,Within 24 hours response,100% Satisfaction Guarantee, Fit with http://a.co/cgZbGi7 Very Well
3. MK8 Extruder Hot End Part Assembled DIY Hotend, 0.4mm Nozzle 12V 40W Heater Including for RepRap、CR 10 3D Printer 1.75mm Filament
- Package include:22 pcs 3d printer nozzles (output diameter ) 22 x 0.4mm, With storage box packaging.
- COMPATIBILITY: mk8 nozzle are compatible with Anet A8, Creality CR-10, Tevo Tarantula, MK8 makerbot, duplicator, prusa i3 and reprap,Compatible with all 1.75mm ABS/ PLA 3D printer.
- Premium material: the cr10 nozzle are made of high quality brass material, Against rust or erosion,sturdy and durable, connect with M6 out thread, easy to install
- Parameter: input diameter 1.75mm
- output diameter 0.2mm, 0.4mm, 0.6mm, 0.8mm, 1.0mm
- out thread: M6,different sizes can meet your multiple needs.
- NOTE: After replacing the nozzle, please recalibrate the distance between nozzle and build plate to ensure the quality of print parts.
Material: Brass of National standard
Out Thread: M6
Filament Diameter: 1.75mm
Output Diameter: 0.4mm
Quantity: 0.4mmX22 pcs
Compatibility: with all 1.75mm ABS/ PLA 3D printer, work well with Monoprice select mini,Prusa i3, Anet8. Installation: external M6 thread connection
How to replace nozzles ?
Step 1: Turn on 3D printer, heat the nozzle and heat block to the target temperature (PLA: 180-220, ABS: 240-280).
Step 2: After heat finishing, close printer, take spanner to hold the heat block. Then use socket screwdriver to screw old nozzle extruder out.
Notice: Please don’t touch the old nozzle and heat block to avoid scalding.
Step 3: Spanner keep to hold the hear block, use the socket screwdriver screw the new nozzle in, make sure tight.
Small parts, please keep away from children.
4. Wellzoom Desktop Filament extruder line II
- Designed for non-professionals.Easy to operate. You can learn to operate in five minutes.
- Energy saving. Producing 1kg filament only need 0.5KWH.
- Auxiliary online measurement.Easy to control the diameter filament.
- A variety of cooling combinations(can be chosen).They can adapt to different kinds of materials.
- Material saving.You can do extrusion test with only 60 gram material.
Wellzoom Desktop extruder is specifically designed for non-professional operators, especially for laboratories. The design is based on a simple concept. Simple operation panel can reduce the risk of misoperation; well-designed structure can effectively avoid scalding operator.
Desktop extruder line II include: Wellzoom C extruder, water-cooling tractor and auto winder.
There are more advantages than before:
On-line measurement function. It provides a low-cost detection method to control the diameter of filament; A variety of cooling combinations(can be chosen).
■ Maximum extrusion speed: 4000mm / min(1.75mm, ABS)
■ Suitable materials: ABS, PLA, Nylon, wood plastic, PVA, PS and so on
■ Operating temperature: below 320℃(maximum 450℃ or 600℃ need customizing)
■ Temperature zone: 2 temperature zones (independent control)
■ Temperature control accuracy: ± 1℃
■ Accuracy of filament: 1.75mm, + / – 0.05; 3mm, + / – 0.1
■ Power requirement : 220V, 50Hz (110V, 50Hz need customizing)
■ Power: 220W-440W
■ Nozzle: 2 (1.8mm, 3.2mm)
Wellzoom C extruder
Simple appearance, easy to operate. You can learn to operate in five minutes；Energy efficient；Material saving，you can do extrusion test with only 60 gram material.
Stepping motor is used to ensure stable traction speed，stepless speed control，and on-line measurement function. A variety of cooling combinations can be chosen.
Match the extrusion speed of the extruder automatically. The traverse mechanism can arrange the filament in order.
5. LONGER LK4 3D Printer, 1kg 1.75mm PLA 3D Printer Filament, and 3D Printer Nozzle 0.4mm MK8 (5PCS) Bundle
- LONGER LK4 3D Printer DIY Kit with 2.8″ Full Color Touch Screen, Resume Printing, Built-in Safety Power Supply 220x220x250mm
- LONGER PLA 3D Printer Filament 1.75mm, Dimensional Accuracy +/- 0.02 mm, No Tangle, Eco-Friendly, Widely Compatibility–Skin–1KG
- 5pcs 3D Printer Nozzle 0.4mm MK8 Brass 3D Print Head M6 1.75mm for LK4 LK4Pro LK1 Makerbot Anet A8 Creality CR-10 CR-10S Ender 3 Pro
6. AMX3d PTFE Teflon Bowden Tube for 1.75 Filament (2.0mm ID/4.0mm OD) – White Connector Tubing for 3D Printer – 2.0 Meters
- IMPROVE PRINTS: Regular Bowden tube cleaning can cause wear, and extruder grinding reduces print quality. Replace your filament tubing to enhance print quality.
- LOW FRICTION: Made from high quality, durable PTFE, the Teflon Bowden tube allows filament to slide better for smoother results.
- HIGH SPEC: Withstanding temperatures up to 260C, this Bowden connector tubing has a density of 2.15-2.20g/cm3, with a 2mm ID and 4mm OD.
- FLEXIBLE TUBING: PTFE Bowden tubes offer impressive flexibility – ideal for smoothly tracking the moving 3D printer head. Packaged without ties to prevent crimping.
- AMX3D ACCESSORIES: The best 3D Prints start with the best tools! AMX3d provides 3D printing partsof the highest quality. If there are any problems with your Bowden Tube just let us know!
7. Stronghero3D PLA 3D Printer Filament 1.75mm Galaxy Classical Bronze Sparkling 1kg for Anet Prusa Creality3D Ender3
pla classic bronze,galaxy bronze
8. Stronghero3D PETG 3D Printer Filament Galaxy Black 1.75mm 1kg for CR10 Ender3 A8 Accuracy +/-0.05mm
petg filament 1.75mm,galaxy black
9. Redrex Left Hand 1.75mm Filament MK8 Bowden Extruder Frame Block for Reprap 3D Printer Kossel Mendal Prusa
3D Printer MK8 Bowden Extruder kit
Used for 1.75mm filament, Reprap, Makerbot
Full Metal Aluminum Alloy
Net weight: 200g
Type: Left Hand
This is improved version, there are 2pcs Pneumatic fittings so that it feeds more fluently.
Equipped with two pneumatic fittings, the feed process more smoothly, you can make your extruder closer to the print head (reducing brushed remote feeding problems arising from this can to some extent), while the supplies can be placed in a more appropriate position, and not worry about other issues stuck supplies)
1 x MK8 Remote Extruder Kit (Left hand)
10. KINGPRINT Upgraded Replacement 3D Printer Part MK8 Extruder Aluminum Block Bowden Extruder 1.75MM Filament Reprap Extrusion for CR10/CR-10/CR-10S DIY(Red)
- Original aluminum alloy driver feed for CR-10/CR-10S/CR-8/CR-7, it is stable and durable.
- Full metal aluminum alloy,diy aluminum block, need to assemble by yourself
- With better stronger pressure pushing the filament into the printer nozzle
- High Quality：Metal extruders are more resistant to corrosion than plastics with anti-rupture and better squeeze.
- It will also allow to print faster with sustained quality and no risk for grinding the filament.
This modified MK8 Extruder has a filament guide tube, all screws, spare drive gear, and upgraded Bowden tube fitting, for CR-10 3D Printer.
Our design gives complete support of flexibles from the intake and output ends.
We’ve reduced the price and complexity of printing flexibles.
It will also allow to print faster with sustained quality and no risk for grinding the filament.
Color: Red / Champagne
Fit To: CR-7/CR-8/ CR-10/CR-10S
Filament : 1.75MM
Material: Aluminum Alloy
By our suggestions above, we hope that you can found Desktop Pellet Filament Extruder Production Line for you.Please don’t forget to share your experience by comment in this post. Thank you!