Finding your suitable readers for desktop amplifier speaker output is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best readers for desktop amplifier speaker output including detail information and customer reviews. Let’s find out which is your favorite one.
907 reviews analysed
1. SMSL AD18 HiFi Audio Stereo Amplifier with Bluetooth 4.2 Supports Apt-X,USB DSP Full Digital Power Amplifier 2.1 for Speaker,Small 80Wx2 Class D Amplifier with Subwoofer Output
Feature
- This class D amplifier Supports USB coaxial analog Bluetooth and two optical inputs
- With amplifier output port, 3.5mm headphone jack and subwoofer outputs, 80w*2 output power, 1.44-Inch Color screen, The brightness of the display can be adjusted
- Customized BT4.2 Bluetooth module, Supports apt-X, easily connect with Bluetooth by NFC
- The Bluetooth amplifier uses tas5508c+tas5342a from TI as amplifier chips, DSP technology, built-in SDB sound patented
- What you get: SMSL AD18 amplifier, 24V power supply us Plug, Micro USB cable, remote control, antenna, 1 year warranty and friendly customer service
Description
AD 18 is a small full digital class d bluetooth amplifier built-in headphone amplifier supports subwoofer output.Connect it to your computer and use it to drive your headphones with an amplifier or to power your passive speakers(4ohm speaker produces 80Wx2 output power).Sophisticated matting aluminum housing reduces interference. Patented SDB sound and +-8 level treble and bass adjustment. Independent headphone amplifier design and advanced DSP technology makes the unit more desirable. Amplifier Chip: Using TAS5508C for digital signal DSP processing and Pre-Amp.TAS5342A for digital signal rear-AMP. It will be through LC filter and then send to amplifier output jack. Digital Receiving Chip:CS8422.It receive optical and coaxial signal and all signal transfer. USB chip:TAS1020B. Supports stereo sound 24bit/96kHz.For much better sound, we use SDPI output instead of internal DAC output design. Strong anti-interference ability and More High-Fidelity. HP Amplifier Chip:MAX97220A. Dual-OP amplifier:NE5532 with High efficiency low noise. Analog/Digital converter IC :CS5341,Accurate to 24 bit 48kHz.Convert AUX signal to digital signal. Then digital signal processing by CS8422 Specification Type: Full digital decoding amplifier Input port: USB/AUX/3.5mm Coaxial and Optical 1/Bluetooth/Optical 2 Output Port: Amplifier output port/3.5mm Headphone port/Subwoofer Voltage: 24V Output power:80W x 2 SNR(Signal to Noise): 90dB THD+N: 0.04% Power consumption: 50W Standby power:0.8w EQ adjustment: 7 Headphone output(32ohm): [email protected]=0.04% USB sampling rate: 24bit 96kHz Optical sampling rate:44.1kHz-192kHz Coaxial sampling rate:44.1kHz-192kHz Treble adjustment range: ±8db,Bass adjustment range:±8db Net Weight: 572g Gross Weight:1585g Machine Size: 172*51*85mm
2. S.M.S.L SA300 Uses Infineon’s New Technology Class D Power Amplifier chip，Bluetooth 5.0 with Remote Control (Black)
Feature
- German Infineon’s new technology class D power amplifier chip, higher quality, efficiency up to 92%, further reducing power consumption.
- New bluetooth 5.0 reception,suport APTX, better sound quality, longer transmission distance
- 32 bits 384KHz USB audio input and support for driver-free use.
- Built-in multiple EQ modes and treble/bass adjustment for easy matching of a variety of speakers and music.
- Super bass preamp output for connecting active subwoofers to form a 2.1 audio system!
3. Compact Bluetooth Stereo Amplifier – Desktop Audio Power Amp Receiver with FM Radio, MP3/USB/SD Readers, Digital LCD Display, Microphone Input (200 Watt)
Description
Features: desktop audio Mini power amplifier compact home Theater stereo receiver style built-in Bluetooth for wireless Music Streaming FM radio with LCD digital display ID3 tag song readout displays track title multi-channel audio input selection MP3 audio file Support connect & Stream Audio from external devices USB flash drive & SD Memory Card readers USB doubles as Device Charge Port aux (3.5mm) input (2) 1/4” Microphone input jacks (2) pairs RCA (L/R) audio Input connectors (2) pairs banana plug speaker output connectors (1) pair RCA (L/R) audio output connectors front panel Audio Control Center radio station auto search scan ‘repeat & random’ Audio file Functions unique ‘track/ Folder’ Music search control knob treble, bass, Master & microphone volume adjustable
4. 1Mii 2020 Bluetooth Digital Amplifier, HiFi Bluetooth 5.0 Audio Amplifier Receiver HD RCA/AUX/Opt/Coaxial Speakers 50Wx2 Bass&Treble Control for Home Stereo System (with Power Supply)
Feature
- 【164FT LONG RANGE】With dual antennas and the advanced Bluetooth technology, the 1Mii B08 Bluetooth amplifier receiver can achieve a range of up to 164ft (50m) line-of-sight in open air and up to 50-70ft (20-30m) indoors(without obstacles).
- 【BLUETOOTH 5.0】The 1Mii B08 Bluetooth amplifier receiver features the latest Bluetooth 5.0 chip to ensure high fidelity Bluetooth audio signal for music streaming to those speakers or home stereo systems that doesn’t have the capability.
- 【HIGH DEFINITION AUDIO】aptX HD audio ensures the high resolution audio. This enhanced codec supports 24-bit music quality over Bluetooth. With the HD technology, the 1Mii B08 Bluetooth digital amplifier ensures that the listeners can hear even the smallest details in their music.
- 【BASS&TREBLE&VOLUME CONTROL】The 1Mii B08 Bluetooth receiver has bass, treble and volume control knobs for hassle-free handling for robust and live sound. This Bluetooth amplifier receiver can drive 50Wx2 speakers easily.
- 【LINE IN&AUX&RCA&COAX&OPT】Support both line in and Bluetooth modes. It has AUX, RCA, coaxial and optical output ports, just plug into home stereo systems or other speaker systems via the 3.5 mm, RCA, coaxial or optical cable, then pair the Bluetooth amplifier with smartphones or tablets. Also you can use the line in to directly connect the audio source device to the 1Mii B08 Bluetooth receiver and then hardwired to the speakers. NOTE: This product is a receiver only, NOT a transmitter.
5. FX AUDIO 2.1 Channel Bluetooth Amplifier with Subwoofer Output for Home Auido Passive Speaker & Passive Speakers 2 x 50W +100W Mini Stereo Audio Class D Amp TPA3116 24V 4A Power Supply
Feature
- 【Yellow Immersion PCB Board】 The Bluetooth amplifier has great power amplification which can deliver high quality amplified audio,lossless sound quality. Long lasting and textured aluminum alloy metal oxidation wiredrawing shell, 1.6mm thick 1oz yellow immersion RF4 PCB board which is impact-resistant and high temperature resistant, gold-plated binding post, four durable silicone anti-skid pad. DC 24V 4A power supply
- 【Multiple Input Options】 This Bluetooth stereo amplifier supports AUX/ RCA/ Bluetooth input. Bluetooth chip uses CSR8635. Compatible with most Bluetooth devices: smart phones, tablet PC, laptops, TV, projector, etc. Wireless connection range is up to 33 feet/ 10 meters when no obstacles. Short press ON/OFF button to switch input modes
- 【2.1 Channel Amplifier with Subwoofer Output】 This home audio amplifier with subwoofer output supports passive subwoofer & L/R passive speakers output which forms 2.1 channel system. L/R passive speakers has max 50W+50W power output. Passive subwoofer has max 100W power
- 【Built-in Chip】 The Bluetooth home audio amplifier uses Teax IC TPA311, CSR8635 Bluetooth chip, OP IC NE5532, MCU chip STM8. Package includes XL-2.1BL home integrated mini amplifier, 1 x RCA cable, 1 x 3.5mm AUX cable, 1 x DC 24V 4A power cable, 1 x 3dB Bluetooth antenna. If you have any quality problems about our products, please feel free to contact us by emailing us
- 【Bass, Treble and Volume Control】 The passive subwoofer amplifier equips separate subwoofer adjustment knob. Bass cut-off point 180Hz. The treble knob adjustment knob can only adjust the treble of the left and right channels, and the gain adjustment range is -6dB to 6dB. The volume knob controls the total volume. It is a great desktop audio power amp with low distortion and acoustically accurate reproduction of music
6. Bluetooth Mini Home Audio Amplifier – Compact Desktop Home Theater Stereo Amplifier Receiver with USB Charge Port | Pager & Mixer Karaoke Modes | Mic Input (40 Watt x 2) | Pyle PTA22BT
Feature
- DESKTOP AUDIO AMPLIFIER: Take control of your sound with hi-powered, mini-style component stereo amplifier performance – enjoy wireless streaming ability with the Mini Blue Series Home Amplifiers with built-in Bluetooth – Power Output: 40 Watt x 2
- BLUETOOTH STREAMING RECEIVER: Simple &
- hassle-free Bluetooth amplifier pairing allows you to connect and play your music to connected speakers and radio systems – or connect and stream audio directly via the Aux (3.5mm) audio input jack connector
- COMPACT SOUND CONTROL: Multi-channel amplifier design paired with convenient audio configuration unlocks home theater stereo system ability right on your computer desktop – gain access to digital sound control with compact amplifier receiver power
- VERSATILE MINI COMPONENT AMPLIFIER: Connect to external devices like radios, speakers and microphones – or use the 1/4” headphone jack for private listening from your home PC desk – features rear panel quick connect push-type speaker terminals
- MICROPHONE PAGER &
- KARAOKE MIXER: Hit the switch to select the desired audio source channel input, then fine-tune your digital sound amplifier for mini-size style with maximum watt power performance for all of your home stereo system needs
- TECHNICAL SPECS: RCA Record Output – Freq. Response: 20Hz – 20kHz – Signal-to-Noise Ratio: 75Db – Input Sensitivity: 150mV – T.H.D.: 0.3% – Bass/Treble: +/-10dB – 10% RMS at 4-Ohm Impedance – 110V/220 Voltage Selector, 50/60Hz
7. Edifier R1280T Powered Bookshelf Speakers – 2.0 Active Near Field Monitors – Studio Monitor Speaker – Wooden Enclosure – 42 Watts RMS
Feature
- 2 x AUX INPUT – Convenient connection to any device that has a 3.5mm headphone output or dual RCA output. Connect to two devices via AUX at the same time, no plugging and switching needed.
- STUDIO SOUND QUALITY – Natural sound reproduction from 13mm silk dome tweeter and 4 inch full range unit
- REMOTE CONTROL – Adjust volume at your figure tips. Bass and treble control located on the side of main speaker.
- CLASSIC WOOD FINISH – High quality MDF wood build finished with wood effect vinyl serves as a great compliment to any home decor.
- 2 YEAR WARRANTY – Guaranteed high quality and reliability with hassle-free parts and labor warranty for two years in USA and Canada.
8. Fostex USA Fostex Desktop Headphone Amplifier with DAC Balanced Output (HP-A4BL)
Feature
- Equipped with 4-pin XLR balanced output
- 1/4-inch unbalanced output
- Newly developed audio-grade capacitors
- highly precise crystal with low phase noise
- Playback 24bit/192kHz PCM and 11.2MHz DSD audio
- high performance DAC (Barrbrown PCM1792A)
- Asynchronous transfer up to 192kHz/24bit compatible with USB Audio 2.0
- HI/LO gain selection (10dB) for wider selection of headphones
- digital filter selecting roll-off characteristics and cut-off frequencies
Description
The Fostex HP-A4BL High-Resolution DAC / Balanced Headphone Amp is a high resolution DAC and balanced headphone amplifier well suited for professional audio engineers, mastering engineers, and audiophiles. The HP-A4BL supports PCM audio up to 24-bit/192 kHz and DSD audio up to 11.2 MHz. The front-panel offers a balanced 4-pin XLR headphone output, an unbalanced 1/4″ stereo headphone output, while the rear-panel features stereo RCA outputs, optical S/PDIF I/O, and a USB 2.0 connector. The HP-A4BL has 2 gain staging levels, allowing you to boost the output of the amp by 10 dB without needing to touch the volume knob. The selectable filter allows you to cut-off lower frequencies if desired. Includes power supply, USB cable, and 4 rubber feet. Founded in 1973, Fostex is an acclaimed manufacturer of location sound, multi-track recording, and speaker products.
9. Douk Audio M1 Pro Hi-Fi 320W Bluetooth 5.0 Power Amplifier Stereo Subwoofer Amp USB Music Player
Feature
- Using classic TDA7498E chip, max output power can reach 160W + 160W, equipped with high-quality 32V/5A power supply enough to drive above 300W passive speakers. It has a good match with outdoor/ bookshelf/ computer/ desktop /ceiling /floor standing speakers.
- M1 PRO supports stereo RCA and Bluetooth 5.0 input, compatible with phones, computers, TVs, MP3 players, TV, Echo Dot, CD players etc. It is also a digital music player with U-disk input supporting MP3, WAV, APE, FLAC and WMA lossless formats.
- A low frequency output is specially designed to connect active speakers and the bass effects can be strongly enhanced. The sound is more delicate with treble and bass control, the shocking auditory effects make you feel like in the cinema.
- Reasonable curcuit layout and concise wiring to ensure HiFi clear and clean sound, no audible noise even at high power output. Unique Bluetooth design without any external antenna, very practical and beautiful.
- Mini size with exquisite appearance, aluminum alloy case and gold-plated terminals are fashionable and durable, with input switch and indicator, very suitable for home and desktop audio system use.
Description
Features:
Using classic TDA7498E chip, max output power can reach 160W + 160W, equipped with high-quality 32V/5A power supply enough to drive above 300W passive speakers. It has a good match with outdoor/ bookshelf/ computer/ desktop /ceiling /floor standing speakers.
M1 PRO supports stereo RCA and Bluetooth 5.0 input, compatible with phones, computers, TVs, MP3 players, TV, Echo Dot, CD players etc. It is also a digital music player with U-disk input supporting MP3, WAV, APE, FLAC and WMA lossless formats.
A low frequency output is specially designed to connect active speakers and the bass effects can be strongly enhanced. The sound is more delicate with treble and bass control, the shocking auditory effects make you feel like in the cinema.
Reasonable curcuit layout and concise wiring to ensure HiFi clear and clean sound, no audible noise even at high power output. Unique Bluetooth design without any external antenna, very practical and beautiful.
Mini size with exquisite appearance, aluminum alloy case and gold-plated terminals are fashionable and durable, with input switch and indicator, very suitable for home and desktop audio system use.
Parameters:
Model: M1 PRO
Channel: 2.0
Audio input: Bluetooth/RCA/U-disk
Audio output: banana speaker jacks / low frequency signal (connect active subwoofers)
Support format: MP3, WMA, APE, FLAC, WAV
U-disk capacity: max 32G
Bluetooth version: 5.0
Speaker impedance: 4-8Ω
Max output power: 160W * 2 (4Ω load)
SNR: ≥98dB
Input sensitivity: 0.775V
THD: 0.05%(1kHz 1W)
Frequency Response: 20Hz-20KHz(±3dB)
Working voltage: DC 19-35V
Color: Black
Dimensions(L*W*H): 118*117*35mm / 4.65*4.61*1.38in
Net weight: 0.455KG / 1.0lb
Package weight: 1.1KG / 2.43lb
Packing List:
1 * Power Amplifier
1 * 32V/5A Power Supply
1 * Manual
Conclusion
By our suggestions above, we hope that you can found Desktop Amplifier Speaker Output for you.Please don’t forget to share your experience by comment in this post. Thank you!
