898 reviews analysed
1. Dash Cam Suction Cup Mount for Yi Dash Cam 2.7" Screen Full Hd 1080p 165 Wide Angle Dashboard Camera, Yi Dashcam Mounts Hold Tightly and Stand Heat Well, 2 Pieces
Feature
- ✈✈STICK TO WINDOW STRONGLY AND STAND HEAT WELL. Our Experiment shows this suction mount can hang up 9 POUNDS of cola, the yi car camera weights about 0.5 pound, this suction cup mount can hold the YI dash cam tightly even in a bouncy worktruck
- ✈✈SIMPLE structure and FRIENDLY design, EASY to install, EASY to remove and reposition, EASY to adjust angle of the yi Smart Dash Cam to get a good view
- ✈✈FITS MOST POPULAR DASH CAMERA for cars, Such Like G1W/ YI camera dash /Z-Edge/BlackBox/SpyTec/Transcend/DOD/Papago/Vicovation/HP…
- ✈✈GOOD ACCESSORY FOR YI SMART DASH CAM, help YI Dashcam cameras provide considerable service to customers. The original package of yi dash cam include a 3M stick mount but a suction mount, if you prefer a suction mount, this suction cup mount is a good replacement of the 3M stick mount
- ✈✈ONE YEAR GUARANTEE. Any problem in one year, just get a new one or MONEY BACK. We provide 2 suction mounts, but it doesn’t mean they are poor quality, we justwant to give you more benefit
Description
YI 2.7″SCREEN SMART DASH CAM DOESN’T COME WITH A SUCTION CUP MOUNT, IF YOU PREFER A SUCTION MOUNT, THIS SUCTION CUP MOUNT IS GOOD FOR YOU. THIS SUCTION CUP MOUNT IS STRONG, EASY TO USE, WOULD HELP YI DASHCAM BRING YOU MORE CONSIDERABLE SERVICE.
Fits the following YI smart dash cam:
YI 2.7″ Screen Full HD 1080P 60 165 Wide Angle Dashboard Camera, Car DVR Vehicle DashCam with G-Sensor, WDR, Loop Recording, Grey
YI cm YI-890062.7 FHD 1080p 1920×1080 F1.8 H.264 WDR HDR 64GB mSD Smart Dash
Question:
Q: How to make sure whether this suction cup mount fit for other car dash cam?
A: We have show dimension of the suction mount on the picture, you can compare it with your camera. And if buy it and find it doesn’t fit for your dash cam, just send it back and get all your money back.
Package:
2 suction cup mount
Think about this: yi dash cam is a great dash cam, You send it to your friend as gift, when they open the package and find the package come with suction cup mount, they would absolutely think your are considerable and be moved.
2. iSaddle CH104 1/4"-20 Thread Universal Mini Camera Suction Mount Tripod Holder Dash Cam Mount Holder
Feature
- Ideal For Small Digital Cameras With 1/4 Inch 20 Mounting Pattern
- PVC Windshield Suction Performs Well In HOT Climates
- Adaptable Head Provides Flexibility For Positioning The Camera
- Attaching To a Clean And Smooth Surface To Get Maximum Holding Strength
- Easy To Get a Customized Holder With iSaddle Mounting Kit
Description
iSaddle 1/4″-20 Thread Camera Mount Holder
Universally Usable
-Fits all small digital cameras with the standard 1/4″-20 camera pattern.
Best Viewing Angles
-Swivel ball adapter head provides flexibility for positioning the camera.
Easy to Install
-Easy to use attach your camera to either your dashboard or windshield quickly.
If you want mount the suction holder to your dashboard, you may need a adhesive mounting disk first. http://amzn.to/2hqglxS
Customize Your Holder
-You can get your own style mount holder by iSaddle Mounting Kit.
Applicable models: (Including but not limited to)
Z-edge dash cam, Spy-Tec dash cam
Sony 4K, PowerShot A2500, and NEX-3NL/B, Fujifilm X-T1, Samsung NX1100 Smart, Olympus OM-D E-M1, Panasonic LUMIX, Nikon Coolpix S7000, Canon Vixia HF R32
3. iSaddle CH02A YI Dash Camera Mount Holder Vehicle Video Recorder/Car DVR Camera Windshield & Dashboard Suction Mount Holder
Feature
- Fits Most Popular Car Dash Cam Such Like G1W/Yi Smart Dash Cam/Z-Edge/BlackBox/Spy Tec/Transcend/DOD/Papago/Vicovation/HP…
- PVC Windshield Suction Performs Well In HOT Climates
- Swivel Ball Adapter Head Provides Flexibility For Positioning The Camera
- Attaching To a Clean And Smooth Surface To Get Maximum Holding Strength
- Easy To Get a Customized Holder With iSaddle Mounting Kit
Description
iSaddle CH02A Car Dash Dash Camera Mount Holder
Widely Usable
-Fits Most Popular Car Dash Cam Such Like Yi Smart Dash Cam/Z-Edge/BlackBox/Spy Tec/Transcend/DOD/Papago/Vicovation/HP…
Best Viewing Angles
-Swivel ball adapter head provides flexibility for positioning the camera.
Easy to Install
-Easy to use attach your camera to either your dashboard or windshield quickly.
If you want mount the suction holder to your dashboard, you may need a adhesive mounting disk first. http://amzn.to/2hqglxS
Customize Your Holder
-You can get your own style mount holder by iSaddle Mounting Kit.
Applicable models: (Including but not limited to)
G1W G1W-C G1W-H/Falcon Zero F170/Transcend Drivepro 200/Vicovation GS1000/4Sigh Dual dash cam/Vicovation-TF2/HP f310/Papago 520
DOD GT300W GT550WS LS300W LS330W LS400W LS430W…
And more special models from Yi Smart Dash Cam/Black Box/Spy Tec/Z-Edge/ivation/wicked/4Sigh/DOD/HP/Transcend/Vicovation/Papago/ARECORD Dash Cam…
4. MiPremium Car Suction Cup Mount for GoPro Hero 8 7 6 5 4 3 3+ 2 Session Black Silver XIAOYI 4K SJCAM Xiaomi Yi EKEN Sports Action Camera Dash Cam Holder Perfect for Boats Vehicle Windshield & Window
Feature
- ►【SNUG FIT, STRONG HOLD – HEAVY DUTY DURABLE MOUNT】 YOU NEED A SUCTION MOUNT WITH STRONG HOLD & DOES NOT BREAK DURING YOUR THRILLING RIDES. Made of durable ABS, PC and metal ball joint. Packaged with a stainless steel rustproof thumbscrew, perfect for indoor and outdoor use in all weather conditions.
- ►【DO NOT BREAK ANOTHER ACTION CAMERA 】 Designed to keep your camera securely and firmly in place during your thrilling rides. MiPremium Suction cup camera mount comes with a 3.5″/90mm suction cup area which is made of two layer TPU to offer great powerful suction capacity. Stick our dashcam mount on windscreens, glassware, window, dashboard, even car bonnet and any other smooth surfaces – making it a perfect suction mount for Go Pro & other action cameras.
- ►【ADJUSTABLE AT EVERY JOINT – GET FLEXIBLE 180 DEGREE ROTATIONS & TILTS FOR PERFECT ANGLE】You should not have to restrict your angle, the adjustable joints and arms of our suction cup mount enables you to lock your go pro camera at the best visual angle and capture your best shots.
- ►【WIDE RANGE OF USE AND BROAD COMPATIBILITY – QUICK & EASY TO INSTALL】 Without the need for additional mounting accessories, compatible with all GoPro Hero 8, 7, 6, 5, 4, 3, 2, 1 models & Crosstour AKASO SJCAM sj7 Star SJ6 SJ7 legend M20 SJ7000 SJ6000 SJ6000 SJ4000 SJ6000 SJ, XiaoYi Xiaomi Yi II 4K APEMAN Campark EKEN H9R H8R SOOCOO C3 and other GoPro-like action cameras. Also compatible with any SLR DSLR Sony, Canon, Garmin, Tom Tom, Xiaoyi 4k or any camera that has a standard 1/4 inch thread.
- ►★★GET MORE FOR YOUR MONEY – 1 x MiPremium Suction Cup Mount, 1 Tripod Mount with Stainless Steel rust proof thumbscrew. MiPremium suction cup mount is backed by 100% guarantee that you are fully satisfied with your product or receive your money back.
5. APEMAN Dash Cam Mirror Mount Kit, Car Rear View Mirror Mount Holder with 360 Degree Free Rotation, Fits APEMAN Dash Cam and Most Car Recorder, More Stable and Anti-Shake
Feature
- FIT TO MOST DASH CAMS – New 4 different joints kit are suitable for most APEMAN dash cam and most other car cameras.
- 360° ROTATION FREEDOM – This mount kit can be adjusted to any angle according to your want. And the dash cam can be perfectly behind the rear view mirror without distracting the driver.
- ANTI-SLIPPOINGS&PROTECTIVENESS – More stable and more durable with using POM and ABS plastics. Silicone plastic belt to ensure smooth contact surface, will not damage the car protective film.
- EASY INSTALLATION – This mount kit is very easy to install and removal. It can be installed to your car without any tools
- PLEASE KINDLY NOTE – This kind of mount need to use on the rearview mirror which has space on the back of the mirror. Clamping diameter range: 38mm-65mm.
Description
APEMAN Dash Cam Mirror Mount Kit is suitable for most APEMAN Dash Cams and other car cameras. It will be more stable than suction cup.
Features:
Applicable models：Come with 4 different joints, suitable for most APEMAN dash cams and other cameras on the market.
Ultra-slim: 9.70mm design to suit most car rear view mirror.
Ball Diameter: 15mm
Clamping diameter range: 38mm-65mm
360 degree rotation design, rotate ball adapter head provides flexibility for positioning the dash cam.
Installation Instruction:
1.Loosening the screw with butterfly nut.
2.Mounting the slicone rubber pad and clip onto the car rearview mirror.
3.Adjust the clip to fit the best angle.
5.Tightened the clip on the rearview mirror with butterfly nuts.
6.Connect the proper connector to the clamp then mount to the clip on the rearview mirror.
The installation details are showed in product manual, please kindly check.
Package Content:
1 Rearview Mirror Dashcam Mount assemble kit
4 Types of Joints Adapter
4 Long Screw
1 Belt
Warm Tips:
If you don’t have experience on installing the mirror mount kit for the dash cam, please ask to APEMAN Customer Team for professional help, we are always here to serve you.
6. 3M Sticky Adhesive Replacement APPS2Car Dashboard VHB Sticker Pads for Magnetic Phone Car Mount,Car Phone Holder Parts,4 Pcs Double Sided VHB Mounting Pads Car Phone Mount Base Sticker Tapes
Feature
- ➣Strong Stickness: Original 3M VHB stick adhesive pads,Double sided self sticky,1.55mm thickness black VHB adhesive pads,stronger than most adhesive pads.
- ➣Suitable for stick many kinds of material with flat hard surface.It can be used in home bathroom mirror, refrigerator,bed post, wall, locker, office, driving personnel and other related equipment replace.
- ➣Rectangular 3M VHB sticky adhesive tape can be used on the bottom of the most dashboard 360 degrees Rotation magnetic car phone mount holder, which is stable even in bumpy roads.It is a strong sticky adhesive replacement for phone car mount.Compatible with Wizgear,Bextrix,Scosche ,Trainium ,PLDHPRO ,Ailun etc.magnetic phone car mount.
- ➣This 3M VHB adhesive pad is high temperature resistance and low temperature resistance,water-proof,Tear off non-trace.
- ➣NOTE:(1),Please don’t stick the 3M adhesive pad on very soft, rugged, texture,grease surface or leather surface.(2),Make sure the desired surface is clean and dry.(3),The 3M VHB adhesive pad is one-time use.(4),It is recommended to wait at least 24 hours ensure the sticker get the best stickiness before use.(5),WORRY-FREE:APPS2Car comes with best-in-class customer service,and lifetime warranty.Please contact us immediately if you have any problem.
Description
NOTE:
1,Please don’t stick the 3M stick adhesive pad on very soft, rugged, texture,grease surface or leather surface.
2,Please remove the residual glue and clean the surface.
3,The 3M VHB adhesive pad is one-time use.please sealed preservation.
4,It is Recommended to wait at least 24 hours after stuck before using.The longer the adhesive time, the stronger the viscosity will be.
5,Peel off the yellow protective film and press it at least 2 minutes then wait for about 2 hours before peel off the other side red film.If the red protective film is hard to peel off, please press it back once and try to peel off it again, don’t touch the gel with your hand after peel off.
Easy installation：
Step 1,Remove the residual glue.
Step 2,Clean&dry the car phone mount base completely.
Step 3,Tear off the yellow protective film.
Step 4,Stick it on the car phone mount base and press it at least 4 minutes for better connecting to the base,then wait for about 2 hours to tear off the other side red film.
Step 5,Clean and dry the smooth and hard flat surface thoroughly to ensure there is no dust or debris.
Step 6,Tear off the other side red protective film,Then stick it on the cleaned dash surface firmly and press it at least 5 minutes to ensure that the adhesive pad and the surface fully bond.It is recommended to wait for at least 24 hours before use.
If you hard to tear off the red protective film, please press it back ,then tear off it again.Don’t touch the gel with your hand after peel off the film.
Package include:
4 X 3M VHB adhesive pads
1 X use manual
7. Dashboard Mount Disc 70mm Diameter 3M Adhseive Dash Mounting Pad for Tom Tom Garmin Magellan GPS Suction Cup Mount Also for Dash Phone Holder – 2 Pack
Feature
- Smooth Surface Mount Disc – To provide smooth, glass-like surface for pedestals of suction cup car mounts to work more effectively. Suitable for Every Suction Mount
- Strong Sticky 3M PE Foam Pad – 3M Adhesive Tape sticks to almost all textured surfaces. *Make sure the surface is cleaned throughly and free of any dashboard conditioners or other treatments.
- Universal Compatibility – Semi-permanent Adhesive Mounting Disc works with all Garmin TomTom Magellean GPS suction mounting pedestals, and dashboard suciton phone mount.
- Size: about 70 mm in diameter
- Note: Each pad is one-time use only. Once removed, it may not be reusable.
Description
Universal Compatibility
About 70mm diameter fits for almost all Garmin TomTom Magellean GPS mounting pedestals and dashboard suction phone mount.
Dashboard Mounting Instructions
1. Choose a suitable location for disk (and pedestal) installation.
Do not place mount in or near an air bag deployment zone or where it will obstruct view of the road or hinder vehicle operation.
2. Clean the dashboard surface area thoroughly with alcohol pad to ensure dashboard is clean and free of any dashboard conditioners or other treatments.
3. Remove the paper backing of the disk and place on the cleaned surface. Press the top of the disk down firmly to allow the adhesive to stick to the surface. Allow 24 hours for the adhesive to cure to the surface before applying any pressure.
4. Place the suction cup of the pedestal (sold separately) firmly down on the center of the mounting disk and lower the securing lever.
Removal Instructions
1. Prepare the surface around the disk by applying a generous amount of rubbing alcohol or similar adhesive removal product to the area with a cotton swab. Let the liquid saturate the adhesive area for about a minute.
2. Take a long piece of dental floss in each hand and slowly work back and forth at the base of the adhesive disk. Gently use the dental floss to cut the adhesive from the dashboard until the black plastic disk is removed.
3. If the sticky adhesive area breaks apart or does not come off completely, re-apply a small amount of alcohol (or adhesive removal liquid) and carefully lift off the remaining area by hand.
Note: Adhesive disk is intended for semi-permanent installation and one-time application. Once removed, it can’t be reapplied.
Package
2 * 70mm Adhesive Mounting Disk
8. MGQFY 4 PCS 80mm (3.15") Circular Double Side Sticker Dashboard Adhesive Replacement Compatible with Xiaoyi Camera/Car Mount/Windshield Pad Mounting Disk for Suction Cup Car Phone Holder Bracket GPS
Feature
- What you get:4 PCS Super Strong Double Side Sticker for Car Phone Mount Holder Bracket, GPS, Camera ,Wall holder, Dashboard Toys, Windshield,Tiles, Wall Pictures and more.
- Strong Adhesive Pads Compatible with xiaoyi camera ,Use widely:Double Sided Clear Acrylic Adhesive Disk Round Tough Sticky Tape Compatible with Mpow 033 car mount holder , Windshield Long Arm Car Phone Mount and other Car Phone Mount Holder Bracket ,GPS Camera ,Decorations, Dashboard Toys, Windshield,Tiles, Wall Pictures.Replacement Adhesive Kit for Long Arm Universal Magnetic Cradle Windshield Dashboard Cell Phone Mount Holder etc.
- CUT INTO ANY SIZE YOU NEED:You can cut pads into smaller pieces if need.
- Strong Adhesive and not leave a residue：Strong adhesive is strong yet leaves no residue when removal is required.
- These sticky pad can stick to lots of materials, such as wood, metals, glass, papers, and plastics and fabrics, etc.
Description
Package include:4 pieces Double Side Sticker Pad.
Double Side Sticker for Suction Cups for Car Bracket Mount Holder /GPS/Camera/Wall hook/and more
9. AUKEY Car Phone Mount 360 Degree Rotation Dashboard Magnetic Cell Phone Holder for Car Compatible with iPhone 11 Pro Max / 11 / XS Max / XS / 8 / 7 , Samsung Galaxy S10+, Google Pixel 3 XL, and More
Feature
- Best Viewing:The base is able to rotate through 360 degrees, and the adjustable arm and ball joint makes it easy to find the ideal phone viewing angle
- Reliable Adhesion: Fixes securely to a flat surface on your dashboard. Features an additional sticker base for slightly curved or uneven surfaces
- Magnetic Attachment: Four powerful magnets securely hold your phone or GPS on your car dashboard. Just grab and go when you reach your destination. Note that wireless charging will not work when a magnetic plate is attached to your device or placed inside its case
- Easy Setup: Included circular metal plate (for smaller phones) and rectangular metal plate (for larger phones) easily slip between your phone and case or can be safely adhered to the back of your phone
- Package Contents: AUKEY HD-C49 Car Magnetic Phone Mount, Sticker Base, Circular Metal Plate, Rectangular Metal Plate, User Manual
10. Dashboard Pad Mounting Disk, 3 Pack CNSL Magnetic Sticky Adhesive Pads for Suction Cup Phone Mount & Tom Tom Garmin Magellan GPS Suction Sat Nav Dash Camera Phone Holder Stick 3.15" (80mm)
Feature
- ★【POWERFUL SUCTION】CNSL 3 pcs super strong dashboard pad adopts nano technology, strongly stick to the smooth surface such as dashboard or desktop for a long time. The dashboard mounting disk hold tight and last a long time.
- ★【REPEATED USE】The adhesive mounting disk can be easily washed, repeated and reused. Clean with soap and water to renew stickiness. The sticky disc will not leave any sticky or greasy residue to protect your car. We use the best quality materials to make the sticky pad non slip and high temperature resistant.
- ★【WIDELY USE】Adhesive Mounting Disk can tightly stick tightly your phone, Car Phone Mount, Car Phone Bracket, GPS Camera, Dashboard Toys, Windshield, Tiles, Radar Detector, Remote Control, Camera, Speakers, Water cup, Glass, Mirrors, Metal, Kitchen Cabinets or Tile, Car, House and so on.
- ★【INSTRUCTION】When you are ready to use Adhesive Dashboard Disk, Remove the paper backing of the disk and place on the CLEANED surface. Press the top of the disk down firmly to allow the adhesive to stick to the surface. If you need to move it, just peel it from the side slowly.
- ★【PACKAGING】3PACK X 8CM Disc ( 3.15inch ). With the double-faced protective film added, the upgraded adhesive mounting pad effectively prevent the disc from being scratched. Each car mount sticky pad replacement is packed in a PE bag.
Description
Easy to Use Dashboard Pad Mounting Disk. About 80mm diameter fits for almost all Garmin TomTom Magellean GPS mounting pedestals and dashboard suction phone mount.
——Dashboard Mounting Instructions
.First tear off the protective cover on the surface of the gel pad when using.
.Then put it in a proper place, press for a few seconds and release when it’s firm.
.Last fix the object on it, also press for a while to make sure it’s well fixed before letting go.
——Dashboard Mounting ATTENTIONS
.Do not put in the place where children under three years old can touch.
.Do not use in the place where SRS of Automobile is located.
.Do not use in the surface where the paints fall off easily or paper wall.
.Do not use in the place with temperature is higher than 80 degrees.
.Do not use in the obstructing the view of the road or hinder vehicle operation.
Conclusion
By our suggestions above, we hope that you can found Dash Camera Mount Stick for you.Please don’t forget to share your experience by comment in this post. Thank you!
