Top 10 Dash Cam Hardwire Kit Auto Shut Off
856 reviews analysed
1. Dash Cam Front and Rear CHORTAU Dual Dash Cam 3 inch Dashboard Camera Full HD 170° Wide Angle Backup Camera with Night Vision WDR G-Sensor Parking Monitor Loop Recording Motion Detection
- ★【Dash Cam Front and Rear】This dual dash cam equipped with 1080P resolution front camera and waterproof rear camera.The car dashcam with 6 pcs IR LED and Wide Dynamic Range, the front camera captures the license plates and road signs clearly even at night, thus ensuring to get you the best footage. Wide-angle front (170°) and rear（130°）camera help eliminate the blind spots of your vision.
- ★【Loop Recording & Emergency Accident Locks】: Seamless loop recording overwrites the old footage with new content when the card is full. Variable sensitivity G-Sensor automatically detects a sudden collision and immediately saves the relevant footage and locks it to SOS file. Thus preventing any overwriting and thereby protecting your video evidence. Keep you away from driving disputes. This dashboard camera supports up to 32GB of micro SD card (card not included in package). ★Warm tips: Please
- ★ 【Dash Cams with Parking Mode】 : The dash cams automatically powers on and starts recording as soon as impact is detected, thus providing you a video evidence if your car is scratched by someone in parking. Hence ensuring your peace of mind with complete 24×7 monitoring of your car.We suggest some important function settings for your daily using: G-Sensor level choose” low” , or turn off
- loop recording choose “3 minutes”
- motion detection choose “off”
- parking monitor choose “On”.
- ★【Easy Installation & Use】This dash camera is very easy to install and operate with reference pictures in our user manual. The included suction mount could be easily attaches anywhere on your windshield in seconds. Just plug in the SD card (not included) and connect to the power supply. The car dash camera will start recording immediately after igniting, shut down and save the video when you shut off the engine.
- ★【3 Years Warranty & 100% Satisfaction Guaranteed】 : CHORTAU is a remarkable company and believes in driving innovations to add value to our customers. We offer 3 years warranty with 100% Satisfaction Guarantee for this dual dash cam, and 7*24 hours technical support. If you have any queries of this dashcam,please reach our customer service team ([email protected]). So, go ahead and “Add to cart”.
2. AUKEY Dash Cam Hardwire Kit with Motion Detection Sensor, Dashboard Camera Hardwire Kit for DR01, DR02, DRA1, DR02 J, DR03 & DR02 D Dual Dash Cameras, and More
- Dash Cam Upgrade: Maintain automatic monitoring of your vehicle when it’s parked and the ignition is off. Don’t leave your car unprotected
- 360° Protection: The inline sensor detects motion within 2–3m / 6.56–9.84ft in all directions. It instantly triggers the dash camera to capture any activity, and the dash camera automatically stops recording and stands by after 2–3 minutes if no further motion is detected
- Simple Setup: No electrical wiring or tools needed to install this kit. Plugs into the OBD-II DLC port under the dash (in all cars sold within the U.S. since 1996)
- Parking Mode Compatibility: Works with AUKEY DR01, DR02, DR02 D, DR02 J, DRA1 and many other mini-B dash cameras with parking mode (motion detection recording)
- Package Contents: AUKEY PM-YY Dashboard Camera Hardwire Kit, User Manual, 45-Day Money Back Guarantee and 24-Month Product Replacement Warranty Card
Dash Cam Companion
Investing in a dash camera is a smart choice for personal protection and insurance purposes, but most dash cameras power off when the car ignition is switched off, leaving your car unprotected. The AUKEY PM-YY Dashboard Camera Hardwire Kit maintains power supply to your dash camera, solving this problem.
Constant Car Protection
The PM-YY connects your dash camera to your car’s battery so the camera can receive power and record any activity after the ignition is turned off. To minimize battery draw in parking mode (motion detection recording), the inline motion detection sensor only activates the camera if motion is detected (within 2–3m / 6.56–9.84ft), and the camera enters standby again after 2–3 minutes if no further motion is detected. The hardwire kit’s 11.6V cutoff also prevents excessive discharge.
Simply plug the connectors of this cable into the OBD-II DLC port of your car’s fuse box and the mini-B port on your camera. Use the 3M adhesive pad to fasten the motion detection sensor to your car’s windshield in seconds. No fuss with fuses or wiring.
Discreet Cable Management
The 10-foot hardwiring cable fits neatly and almost unnoticed in your car, elevating your dash camera to the next level with greater integration and functionality. Also, with a car charger port freed up, you have more ports to charge your devices. This hardwire kit is a small but powerful dash camera accessory for your AUKEY DR01, DR02, DR02 D, DR02 J, and many other dash cameras with mini-B power input port and parking mode.
45-Day Money Back & 24-Month Warranty
All AUKEY products are backed by our 45-Day Money Back Guarantee and 24-Month Product Replacement Warranty.
3. SHISHUO Dash Cam Hardwire Kit – Mini USB and Micro USB Port 3.5m Cable with LP Mini/Mini/ATO/Micro2 Fuse, 12V to 24V Input, 5V Output for Dash Cam GPS Sat-Nav with Battery Drain Protection
- 3.5m hardwire kit for dash cam or other device powered by Mini USB port and Micro USB port, 5V/1.5A steady output, voltage input supports from 12V-24V
- Comes with Low-Profile Mini, Mini, ATO (Regular), and Micro2 fuse adapter, suitable for most cars. Leads come with protective sleeve to cover the crimps
- Make parking monitor for dash cams (should the device support) available, keeps it powered even after engine off
- Battery drain protection will cut off the power once the input voltage drops to under 11.6V (23.2V for 24V input), leaving enough power to ignite the engine
- 2-year warranty from SHISHUO. Worry free aftersales customer services.
SHISHUO Dash Cam Hardwire Kit – Keep your dash cam powered even after engine off!
Dash cam product’s parking monitor function will require device been hardwired to car battery, that’s the best reason why you’ll need this hardwire kit!
This hardwire kit comes with 3.5m hardwire cable with Mini USB port and adapter cable to convert to Micro USB port, providing steady 5V/1.5A output. Big voltage input ranging from 12V-24V.
4 fuse adapter available, Low-Profile Mini, Mini, ATO (Regular), and Micro2, suitable for most cars. Each lead has a protective sleeve to cover the crimp, safer and more durable.
Featured with battery drain protection, power will be cut off once the input voltage drops to under 11.6V (23.2V for 24V input), ensure there’s enough power left to ignite the engine.
1* Hardwire cable with Mini USB port
1* Mini USB to Micro USB adapter cable
4* Different types fuse lead
4* Different types fuse adapter
1* Crowbar 15* Cable clips
4. APEMAN Dash Cam Hardwire Kit for C450 Series A, DC 11.5V-40V to 5V Car Charger Power Kit, Build-in G-Sensor and Low Voltage Protection for Dash Cameras
- Fits for APEMAN C450 Series A – With Mini charging port converters, the kit is basically fit for Mini port Dash Cams or Car Charger like APEMAN C450 Series A
- Compatible 11.5–40V Vehicles – This Hardwire Kit connects the camera directly to the car, truck, bus, suvs, or big rig for continuous power, with wide range of input voltage(Voltage between 11.5-40V), suitable for most of car mini USB device on the market.
- Build-in G-SENSOR – The dash cam automatically shuts down 5 minutes after the car is turned off. At this time, the G-SENSOR in the OBD starts to work (in the monitoring state). Once the car is vibrated, the OBD will be powered on to turn on the recorder. When there is no vibration signal, the driving recorder will automatically shut down after 1 minute, which will save the battery.
- 24 Hours Parking Surveillance – The hard-wire kit connected to OBD-II connector of your car, can uninterruptedly supply power for dash camera for 24 hours. It can even supply Directly to the battery for constant 24hrs/7days power to protect against theft when your car is in the parking lot.
- Low Voltage Protection – With a smart low voltage protection system, the camera will power off automatically when the battery voltage lower than to 11.5V, thus preventing it draining the battery.
APEMAN Hardwire Kit for Mini USB Dash Cam APEMAN C450 Series A
It’s a must-have if you need 24/7 parking guard with your dash cam. It connects the camera directly to the OBD-II connector of your car under the dash cam for continuous power from the vehicle’s battery. When the car is driving, it can be used replacing the ordinary car charger, and the car ignition will not be powered off.
APEMAN Hardwire Kit is specialized for APEMAN’s Star Dash Cam – C450 Series A or other Mini charging port car recorder.
★ Connector: Mini USB
★ Input Voltage Range: 11.5V-40V
★ Output: 5V /1.5A
★ Working Temperature:-10-60℃
★ Cable Length: 3M
★ Low Voltage Protection: When voltage lower than 11.5, automatically cut off the power
1.Mount your camera where it has full vision of your road
2.Run the wiring towards to the OBD-II connector of your car
3.Hide the wire under the headboard
4.Remove the 3M Sticker of the G-sensor on hardwire kit, then firm to the windshield where close to dash cam.
5.Connect the hardwire kit with the dash cam and power the camera for using.
★ If you don’t have experience on installing the hardwire kits for the dash cam, please ask to APEMAN Customer Team for professional help, we are always here to serve you.
5. Dash Cam 1080P DVR Dashboard Camera Full HD 3" LCD Screen 170°Wide Angle, WDR, G-Sensor, Loop Recording Motion Detection Excellent Video Images(Black)
- ???? SUPER NIGHT VISION AND WDR TECHNOLOGY：Infrared Sensor with LED Light with High Quality Image During Night. It is designed with super big aperture and Wide Dynamic Range, so when driving in the evening with one dash cam,which will be safer and reliable. And this dash cam can catch real time Lane Departure even in darkness.
- ???? 1080P WITH 3 INCH LARGE LCD SCREEN CAR RECORDER: Offer You a Broad Detailed Road Video, 1080P Full-HD Video with a super-wide angle lens captures the whole road in crystal-clear definition. It GREATLY offers you a perfect video evidence in the insurance case increase your sense of Security and necessary indemnification.
- ???? DASH CAM BUILT IN G-SENSOR:Equipped with G-SENSOR, once the vehicle collides, it will automatically record and automatically save it to the emergency video folder to prevent the video from being covered to ensure the evidence is intact. And the collision CAN BE LOCKED so it’s super reliable for car devices.
- ???? 170° WIDE-ANGLE & MOTION DETECTION: 170-degree wide wide angle easily covers 4 lanes.In order to reduce the blind spot, the wide-angle design of the driving recorder is very important. We chose a large wide-angle all-glass lens with a viewing angle of up to 170 degrees, and the intelligent wide-angle image correction is not deformed. Excellent high sensitivity, true and meticulous restoration of the truth of the event.
- ???? LOOP RECORDING & H.264 TECHNOLOGY : When the memory card is full, the intelligent automatic deletion of the normal recorded video without manual deletion can realize the loop recording, eliminating the trouble of manually deleting the video. The important evidence can be separately protected and not be deleted.
1.There is a film on the screen, it’s not scratched, please tear it off.
2.Please turn off the “auto power off” before use to avoid turn off continuously!
3.If you connect the cam to computer via USB cable, the screen will read Mass storage.
4.The SD card is not included in package. You are suggested to use a class 10, 32GB max SDHC card.
5.The battery of the cam is only for emergence file back up. External power is required for operation.
2 MOUNT KITS mount kits
3 inch large lcd screen
G-sensor, Night vision
1 x Dash Cam
1 x Car Charger( USB cable)
1 x Suction Cup
1 x Adhesive mount
1 x User manual
If there is any question, please feel free to ask me for help, do not leave bad comment right away, communication is the most important thing, so if you have problems with your order or products, contact us at this mail: [email protected] And Our Customer Services Mail is: [email protected], We will try everything to solve the problems and make you all my distinguished guests satisfied.
6. Vantrue 10ft Mini USB 12V-24V to 5V Dash Cam Hardwire Kit with Mini/ACS/ATO/Micro2 Add a Circuit Fuse Holders, Low Voltage Protection for Mini USB Dash Cams, GPS Navigator, Radar Detectors
- 【Compatible 12 – 24V Vehicles】This hardwire kit connects the camera directly to the car, truck, bus, suvs, or big rig for continuous power, accepts voltage from any type of vehicles runs on 12 – 24V.
- 【24/7 Parking Surveillance】Directly to the battery for constant 24hrs/7days power to protect against theft when your car is in the parking lot.
- 【Power Supply】Directly to the ignition wire for power only so it can turn on and off with the ignition and you don’t have to worry about plugging in the charger, or turning the dashcam on, or any such stuff.
- 【Low voltage protection】It has a smart low voltage protection system that will automatically shut off the power to your dash cam when the battery voltage drops to 11.4V or 22.8V, thus preventing it draining the battery.
- 【Mulitiple uses】Mini USB plug compatible with all mini usb dash cams such as Vantrue N2 Pro/N2/X3/T2/N1 Pro/X1, GPS navigator and radar detector etc, it always frees up the cigarette lighter for other devices.
7. Anker Roav 6 ft USB Hardwire Kit, 24/7 Parking Mode, Low Voltage Protection, 12V-30V, Easy Installation Into Vehicle OBD, Compatible with Roav DashCam Duo
- 24/7 Surveillance: Connects directly to your vehicle’s battery to deliver an uninterrupted supply of power to your dash cam. Capture reckless drivers and other hazards, 24 hours a day.
- Power for All: Compatible with 12V-30V vehicle batteries. Bring power to cars, SUVs, pickup trucks, buses, commercial trucks, and more.
- Hassle-Free Set Up: Plugs directly into your vehicle’s OBD-II port for safe and speedy setup.
- Low-Voltage Protection: The built-in safety system automatically shuts off power to the dash cam when your vehicle’s battery is running low, preventing any further drain on the battery.
- What’s in the Box: 6 ft USB Hardwire Kit, 3M tape, our 12-month product replacement warranty, and friendly customer service.
6 ft USB Hardwire Kit
Hardwire kit for dash cameras
From Roav—Making the Smart Driving Experience Accessible to All
A collection of connected devices that enhance your driving experience.
Created by the same team as Anker—renowned for exceptional quality and innovation.
Power On, Always
Deliver a constant supply of power to your dash camera or any other connected USB device, even when your engine is switched off.
Parking Mode Activated
Required for use of DashCam Duo’s Parking Mode. Once connected using the hardwire kit, DashCam Duo keeps an eye on your vehicle 24 hours a day. If sudden movements are detected, the built-in gravity sensor activates the camera to record the situation.
Unlike a traditional hardwire kit, there’s no need to mess around with fuses and wires. Simply plug the hardwire kit directly into your car’s OBD-II port for a continuous source of power.
Built-in safety features protect your devices against overheating and current overload, while also automatically cutting off power to the dash cam when your vehicle’s battery voltage is running low.
An Extra Boost
If your mobile device is low on power, simply connect it up to the hardwire kit’s USB port for an emergency charge.
8. Thinkware TWA-SH THINKWARE Hardwire Kit Cable for THINKWARE Dash Cams | Parking Mode | Impact and Motion Detection | Car Battery Drain Protection System | Alternative Power Supply from Fuse Box
- Connects the main dash cam unit to the vehicle’s fuse panel (Professional Installation Recommended)
- Enables Parking Surveillance mode with impact and motion detection when the car is parked
- Activates the built-in voltage meter in the main unit which monitors the battery level and automatically shuts off the device if low voltage is detected
- Connecting cable is 9.8 feet (2.98 meters) long
- Hardwiring cable is compatible with all THINKWARE dash cams (except F550)
THINKWARE TWA-SH is a hardwiring cable that connects to your THINKWARE dash camera directly to your vehicle’s fuse panel, which allows the camera’s parking surveillance mode to function while the vehicle’s ignition is turned off. The built-in voltage meter in the main unit will be activated to monitor the battery level. It will automatically shut off the device if the voltage dips below the configurable voltage cut-off level. One-year manufacturer’s warranty: covers units sold at authorized retailers only. Disclaimer: Device is pre-loaded with a firmware and GPS data that are specific for use within the US only. Proper device operation cannot be guaranteed outside of the US.
9. BESTEK Dash Cam Hardwire Kit with Motion Detection Sensor, 12V 24V to 5V/2A OBD-II Dash Cam Hardwire Kit with 9.4ft/2.85m Wire, Low Voltage Protection Compatible with Mini USB Dash Cams, GPS Navigator
- Wide Compatibility: This dash cam hardwire kit is suitable for most 12V and 24V vehicles, compatible with all the 2 amps input Mini USB（not for Micro USB） dash cam, mirror cam, GPS navigator and radar detector etc. Works with most of the APEMAN, CHORTAU, Vantrue, Nexar, Falcon, Aukey, VAVA and other Mini USB dash cam.
- Easy Setup: No extra electrical wiring or tools needed to install this kit, just plug into the OBD-II port. You can adjust the position of the 9.4ft/2.85m line at will to get the most comfortable installation.
- Wide Sensing Range: 19.7ft/6m long detection distance and in front 150° induction angle. Instantly turns on the dash cam when motion is detected, shuts off automatically within 30 seconds after motion is not detected.
- 24 Hours Surveillance: This kit uses international universal type OBD II port (with on/off power switch) instead of cigarette lighter port, which will release cigarette lighter for other electronic devices, can supply power for dash camera for 24 hours uninterruptedly. The motion detection function let your dash cam record when at needs. Built-in safeguards protect your device from overcurrent, overvoltage and overheating damage.
- Battery Drain Protection: This kit will continuous power your car devices, but when your vehicle’s battery voltage drops to 11.6V or 23.6V, the regulator will cut off the power, for the purpose to leave enough power to start up your engine, this also called Low Voltage Protection. You can also turn off the power switch if you don’t need to record.
10. Vantrue S1 Dash Cam 10ft Mini USB 12V 24V to 5V Dash Cam Hardwire Kit with Mini, ACS, ATO, Micro2 Add a Circuit Fuse Holders, Low Voltage Protection
- 【Compatible 12 – 24V Vehicles】This hardwire kit connects the camera directly to the car, truck, bus, suvs, or big rig for continuous power, accepts voltage from any type of vehicles runs on 12 – 24V.
- 【24 Hours Surveillance】Directly to the battery for constant 24hrs/7days power to protect against theft when your car is in the parking lot.
- 【Power Supply】Directly to the ignition wire for power only so it can turn on and off with the ignition and you don’t have to worry about plugging in the charger, or turning the dashcam on, or any such stuff. The package come with 4 types fuse holder, Mini, ACS, ATO and Micro2 Add , which suit for most cars on the market.
- 【Low voltage protection】With function of auto detect battery voltage and low voltage protecting, it can auto shut off power output when the battery voltage lower than 11.4V or 22.8V, compatible with large and small car, thus preventing it draining the battery.
- 【For Vantrue S1 Use】 Mini USB plug compatible with the Vantrue S1 dash cam.
By our suggestions above, we hope that you can found Dash Cam Hardwire Kit Auto Shut Off for you.Please don’t forget to share your experience by comment in this post. Thank you!