The Best Cooling System Flush Tool Pulsating Gun

OTC’s No. 6043 Blast-Vac Multipurpose Cleaning Gun is perfectly suited for quick and efficient cooling system flushing. Simply attach it to radiator or heater hoses and you’re in business. Also useful for washing engines and even shop floors. Just two simple connections – one to shop air, the other to a standard water faucet – creates a unique air/water vortex blast for powerful cleaning capabilities. The tool can also be used to vacuum by turning the venturi inside the gun in the opposite direction. Air flow is reversed to create a strong vacuum. Note: While normal water pressure will handle the majority of a cooling system flush situations, short blasts are sometimes needed to loosen some contaminants from within the system. Value is at the core of the OTC tool and equipment portfolio. For a simple repair or the most complex drivability concern, these award-winning tools universally solve problems faster, and at better value, than any other product line available. Whether it’s a specialty tool or unique piece of service equipment, OTC provides top solutions to modern automotive service challenges while increasing technicians’ productivity and shop profits.

Gunk 10 Minute Radiator Flush quickly removes grease, scum, rust and scale. It is a fast, one step product that requires no neutralizer and contains no acids. This radiator flush is compatible with all cooling systems.

Simply remove radiator cap and drain the coolant. Remove heater hoses from the engine, placed the stepped adapter end of the Back Flush tool into the hose opposite of the one connected to the water pump. Connect the adapter to the shop water supply. Turn water supply on and open the valve to allow water to flow through the heater core. Once you see clear, clean water, you heater core is clean.

Provides the technician with an easy way to flush the heater core. Simply remove radiator cap and drain the coolant. Remove heater hoses from the engine, placed the stepped adapter end of the THX356 Back Flush tool into the hose opposite of the one connected to the water pump. Connect the adapter to the shop water supply. Turn water supply on and open the valve to allow water to flow through the heater core. Once you see clear, clean water, you heater core is clean.

Enables thorough flushing of debris and contaminants from Cooling system during repair and maintenance. Powered by workshop air, which creates a vacuum to draw water from a container. Can also be used with mains pressure tap water.

The Hydro Series H60 is an all in one liquid CPU cooler with a 120mm radiator built for low noise liquid CPU cooling and bold styling with a white LED lit pump head. Compatible with all current AM4, LGA 1151 and LGA 2066 socket CPUs and equipped with a CORSAIR 120mm SP Series PWM fan, users can adjust the fan speed between 600 RPM to 1,700 RPM for precise control over noise and airflow. A high density 120mm slim radiator provides greater surface area for superb heat dissipation, while a thermally optimized copper cold plate and low noise pump ensure heat is quietly and efficiently channeled away from your CPU. With tool free easy installation and CORSAIR engineered cooling, the H60 is everything you need to keep your CPU running fast, cool and quiet.