985 reviews analysed
1. 8milelake Fuel Pump & Vacuum Tester Carburetor Valve Pressure Tester Gauge Kit Car Truck
2. ABN Car Vacuum and Fuel Pump Tester Gauge Kit – Fuel Pump Pressure & Vacuum, Carburetor Intake Manifold, Vacuum Test
- DIAGNOSE YOUR VEHICLE: The ABN Car Vacuum and Fuel Pump Tester Gauge Kit – Fuel Pump Pressure & Vacuum, Carburetor Intake Manifold, & Vacuum Test enables testing of the fuel delivery pressure to the engine to check for worn or defective parts in fuel pumps and vacuum systems
- Set includes a variety of adapters suitable for most vehicles
- Intended for carburetor engines with a mechanical fuel pump operating pressures below 10 PSI (0.7 Bar)
- 4-IN-1 KIT: 4 tests can be performed – Fuel pump pressure, fuel pump vacuum, carburetor intake manifold, and vacuum test
- When reading the pressure gauge, occasional needle drop indicates that the carb or tappets need an adjustment plug, missing or stuck valve, or trouble in carburetor
- Steady, regular drop indicates that the valve is held open, burnt, or chipped
- Wide pressure fluctuation at high speeds indicates a weak valve spring
- Steady drop to zero pressure indicates a choked muffler
- EASY TO USE: Assembly and operating instruction manual included
- Pressure gauge has a 4-inch (10.2cm) diameter with color-coded measurement scales so it is easy to read and a 1.2-inch (3cm) thickness with rubber side notches for easy grip
- Extra-long rubber hose and 14mm/18mm manifold adapter
- Rubber hose 40 PSI (2.8 Bar) maximum working pressure
- Pressure gauge 0-28 IN-Hg (0-70 cm-HG) vacuum and 0-10 PSIG (0-0.7 kg/cm²) pressure
- EASY STORAGE: Heavy-duty 12.75” x 2.25” x 7.25” inch (32.4cm x 5.7cm x 18.4cm) plastic blow-molded carrying case with handle for easy transportation, safe storage, and quick organization
- PACKAGE CONTENTS: Package includes (1) vacuum pressure gauge, (1) 2-foot (61cm) long rubber hose – 13/64-inch ID 23/64-inch OD, (1) brass cone adapter, (1) plastic connector, (1) 1/4”x18 male to 1/8”-27 female brass adapter, (1) 1/8”-27 male to 7/32” barbed brass fitting adapter, (1) 1/8”-27 female to 3/8” male brass adapter, (1) T-type 7/32” barded brass fitting adapter, (1) carrying case, and (1) instruction manual for your convenience
3. OTC 5613 Vacuum/Pressure Gauge Kit
- Ideal for testing vacuum lines and components
- Accurately tests low-pressure fuel systems
- Quickly diagnose internal engine problems such as bad rings valves and leaking head gaskets
- Kit comes complete with adapter for most applications
- Pin point hard to find problems such as cracked lines PCV fuel pump fuel filters and more
4. Lisle 20300 Vacuum Gauge and Fuel Pump Tester
5. HTOMT 2 in 1 Brake Bleeder Kit Hand held Vacuum Pump Test Set for Automotive with Sponge Protected Case,Adapters,One-Man Brake and Clutch Bleeding System
- Easy Usage: Hand vacuum pump is easy to bleed your car brakes.
- Convenient Carrying: Portable kit which includes different adapters designed for all vehicles is suitable for both home and business applications.
- Widely Use: 4 tubes of different length to cover different needs.
- Vacuum Gauge: Equipped with vacuum gauge, convenient readout of pressure, Pressure range: 0-30inHg, 0-760mmHg
- Carry Case : Made by high quality material, durable and rugged, Contained in a blow mold case for easy transportation and storage
6. JIFETOR Radiator Pressure Leakage Tester and Vacuum Cooling System Purge Coolant Refill Tool Kit, 28PCS Universal Automotive Water Tank Leak Test Detector and Pneumatic Vacuum Coolant Change Set
- MULTIFUNCTION: The set is a all in one comprehensive radiator tool kit, includes leak detection, temperature measurement and coolant filling functions. The hand pump tester pressurize on the reservoir/cap, and watch for pointer drop over time to confirm system leak down. Pneumatic vacuum filler first sucks and forms a vacuum on the cooling system by using shop air, then draws coolant into system. Add coolant in vacuum, there is no large air pocket and avoid warping or other damage in engine.
- WIDE USAGE: Coolant system leak checker and filling tool set is equipped with 17 specific adapters and 1 universal tapered rubber adapter, suitable for almost all types of radiator openings on classic and modern vehicles. Included 3 radiator cap test adapters and 2 connectors help to diagnose the leakage of radiator caps on most cars. All these adapters are color coded and placed exclusively, can be easily selected according to the marked pictures in instruction, convenient and no confusion.
- WATER TANK COOLANT VACUUM REFILLER: Plastic covered premium brass manifold body, equipped with brass fittings, anti-corrosion and durable. The index range of gauge is -30 to 0inHg (-76 to 0cmHg), and normally -25 to -20inHg is right time to add coolant. 18″ rubber resin material weave reinforced hose, featured with anti-corrosion, low fluid resistance, high bearing pressure, ensure durability and good air sealing. 21″ metal hook, 21″ transparent bleeder hose and 59″ refill hose are included.
- HAND PUMP LEAK DETECTOR AND THERMOMETER: Radiator pressure test tool uses aluminum pump cylinder rather than plastic one, 21″ rubber nylon resin hoses, brass fittings, solid and durable. 3″ large dial gauge with index range 0 to 35psi (0 to 2.5bar), easy to observe. Stainless steel thermometer with index range 0 to 200℃ (32 to 400℉). American & European styles air plugs are included for you to choose. Customized blow molding case keeps everything in place and protects the gauges during storage.
- SATISFACTORY CUSTOMER SERVICE: 30 days full refund with returned undamaged JIFETOR complete cooling system leakage detector and coolant refiller set. Any quality related problem in 1 year, we will replace the fittings for free or refund. Any question, please feel free to contact us by email or amazon message system, we will reply ASAP in 24 hours.
Why need Radiator Pressure Tester & Vacuum Type Coolant Refill Kit
1.Troubleshooting and save money: Many problems, even a damaged engine, may be caused by a small leak in the cooling system or pour coolant into radiator without vacuuming. This kit will save much more than its price
2.Time saver: Normally, it takes around 10mins to test leak and 5-10mins to refill coolant. Easy to operate
Why choose JIFETOR Cooling System 28PCS Tool Kit
1.A all in one comprehensive radiator tool kit, includes leak detection, temperature measurement and coolant filling functions
2.Adopt brass manifold body and fittings, aluminum pump cylinder, rubber nylon resin hoses, ensure durability and good air sealing
3.Include 17 color coded specific adapters and 1 universal tapered rubber adapter, suitable for almost all types of radiator
4.Equip with American & European styles air plugs, widely adapted to your existing air hose
5.Updated more compact customized blow molding case keeps everything in place and protects the gauges during storage. 21PCS adapters are placed exclusively, can be easily selected according to the marked pictures in instruction, convenient and no confusion
1x Radiator Hand Pump Leakage Tester
1x Vacuum Purge and Refill Tool
1x Stainless Steel Thermometer
1x European Style Air Plug
1x 59″ Coolant Filling Hose
1x 21″ Bleeder Hose
17x Color Coded Specific Radiator Test Adapters
1x Universal Tapered Rubber Adapter
3x Aluminum Radiator Cap Test Adapters
1x Black Connector, Test Radiator Cap No.3(R123) and No.4 (R124)
1x Blue Connector, Test Radiator Cap No.3(R123) and No.5 (R125)
1x Handle Tool
1x Detailed Instruction
1x Customized Blow Molding Case, 20″Lx18″Wx4″H
1.Please wear gloves and goggles when use
2.Use by professional or under the guidance of a professional
3.Always refer to equipment manufacturer’s operation instruction
7. AUTOOL SDT-206 Automotive EVAP Leaks Testing Machine, 12V Vehicle Pipes Fuel Leakage Detector Diagnositc Tester for Car/Motorcycles/Boat (Newest Dual Modes)
- NEW ARRIVAL — The 2019 updated revolutionary SDT-206 with dual modes(Smoke Mode and Air Mode), designed for detecting the leakage of pipe systems on cars, motorcycles, boats, such as fuel pipe, air intake system EVAP system and cooling tank.
- WORKING PRINCIPLE — The machine will change special oil(baby oil or mineral oil) into smoke, then blow smoke into sealed pipe system. You will find leak points in the pipe via the smoke. Please repair the part where leakage exists.
- EVAP SYSTEM SUPPORTED — Comes with EVAP adapters, updated SDT-206 can help you apply with EVAP System of all vehicles to quickly find out the leak parts. 4ft Smoke Outlet Pipe can help reach and connect perfectly. Adjustable 0-23PSI DO NOT harm to EVAP System.
- SPECIFICATIONS — Built-in two compressors. Voltage: DC 12V(Supplied by Automotive Battery). Smoke Output Value: 0-6L/min. Output Pressure: 0-23PSI. Heating Material: Mineral Oil or Baby Oil(oil not included). Adjustable Flow Switch and Fluidometer Guage help control easily.
- 3 YEARS WARRANTY — 3-7 days fast shipment via DHL/FEDEX. To ensure your high-quality shopping experience, we provide 3 years warranty(longer than competing machines). 24 hours E-mail supports can help resolve any issues of using. Buy and use with confidence.
8. AUTOOL Automotive Smoke Leak Detector Evap Car Pipe Leakage Tester Fuel Leak Locator Universal for Motorcycle/Car/Truck
- SDT-106 is designed for detecting the leakage of pipe systems on cars, motorcycles, such as fuel pipe, air intake system and cooling tank. SDT-106 is for all pipe systems Support EVAP.
- EVAP SYSTEM SUPPORTED — Comes with EVAP adapters, SDT-106 can help you apply with EVAP System of all vehicles to quickly find out the leak parts. 4ft Smoke Outlet Pipe can help reach and connect perfectly.
- SPECIFICATIONS — Voltage: DC 12V(Supplied by Automotive Battery). Smoke output value: 10-13L/min. Output Pressure: 9-11PSI. Oppreating material: Mineral Oil or Baby Oil.
- WORKING PRINCIPLE — The Smoke Machine heat up special oil(mineral oil or baby oil) into smoke and blow smoke into sealed pipe system. You will find out leak point in pipe in where has smoke. Please repair the part where leakage exists.
- With longtime high temperature, the smoke and oil will oxidize and deteriorate. It will infect the ser-vice life of smoke generated part, so please change smoke and oil regularly.When you use this detector the first time, please fill 20-30ml oil, not beyond this range.When the smoke output has water drops, please replace with fresh oil.Before filling fresh oil, please pour out the remaining oil in the detector.Liquid paraffin and baby oil are OK.Please fill fresh oil with equipped oil bottle.
9. MEASUREMAN Glycerin Filled Vacuum Gauge 2-1/2" x 1/4"NPT Lower, Stainless Steel Case, Brass Inside, 30inHg/-100kpa-0
“This liquid filled vacuum gauge is designed for media which is not corrosive to brass, also where vibration and pulsation is a concern.
Dial size: 2-1/2″”
Process connection: 1/4″”NPT lower mount
Case: 304 stainless steel case and crimped ring
Dial plate: aluminum, with pointer stop
Pointer: Aluminum, black, DIN style
Bourdon tube: Copper alloy
Connection: Brass, one piece design
Oil cap: rubber, gray color
Filling: Glycerin filled, dampens the effect of vibration and pulsation; lubricates the movement and extends the life of gauge.
IP class: IP67
Range: 30″”Hg/-100kpa-0, “”Hg outside, kpa inside
Working temperature:-4 to 140 deg F/-20 to 60 deg C
Ambient temperature:140 deg F/60 deg C maximum”
Meaureman has 20 years rich experience in the measuring of pressure, temperature, flow, level industries, The “Measureman” branded products are the combination of continuous good quality and affordable price. “Measureman” products are selected and designed by professional engineers.
10. GooMeng Carburetor Carb Valve Fuel Pump Pressure, Vacuum Tester Gauge Test Kit, Engine Vacuum Pressure Tester for Automotive Cars Trucks
- 【4-IN-1 KIT】 4 tests can be performed – Fuel pump pressure, fuel pump vacuum, carburetor intake manifold, and vacuum test
- 【EASY TO USE]】Assembly and operating instruction manual included
- Color-coded measurement scales so it is easy to rea
- Test fuel pump output pressure to 14 PSI
- Read engine vacuum to 28“HG
- 【DIAGNOSE YOUR VEHICLE】 Set includes a variety of adapters suitable for most vehicles
- Intended for carburetor engines with a mechanical fuel pump operating pressures below 14 PSI (1 Bar)
- 【PACKAGE CONTENTS】1* vacuum pressure gauge, 1* 2-foot (61cm) long rubber hose – 13/64-inch ID 23/64-inch OD,1* brass cone adapter, 1* plastic connector, 1*1/4”x18 male to 1/8”-27 female brass adapter,1* 1/8”-27 male to 7/32” barbed brass fitting adapter, 1*1/8”-27 female to 3/8” male brass adapter, 1* T-type 7/32” barded brass fitting adapter, 1*carrying case, 1* instruction manual
GooMeng Technology Co., Ltd. is mainly engaged in the production and sales of auto parts, auto maintenance tools, auto repair tools, pneumatic tools, hardware tools and other products. There are more than 100 existing products, and the products are sold at home and abroad. GooMeng technology is gradually developed, with a complete and scientific quality management system and business objectives based on integrity. Excellent product quality is recognized by the industry.
(1) It is made of high quality alloy steel, plastics and rubber materials,durable and practical for you to use.
(2) It is special used to check the size of the gas pressure in the cylinder measuring tool.
(3)Light weight and portable,it is easy for you to use in the daily life.
1* vacuum pressure gauge,
1* 2-foot (61cm) long rubber hose – 13/64-inch ID 23/64-inch OD
1* brass cone adapter,
1* plastic connector,
1*1/4”x18 male to 1/8”-27 female brass adapter
1* 1/8”-27 male to 7/32” barbed brass fitting adapter
1*1/8”-27 female to 3/8” male brass adapter
1* T-type 7/32” barded brass fitting adapter
1* instruction manual
If you have any question, please contact us. We will help you handle the problem as soon as possible.
By our suggestions above, we hope that you can found Car Vacuum Tester for you.Please don’t forget to share your experience by comment in this post. Thank you!