The Best Beam Vacuum Powerhead

The product sold by Anderson’s Appliances and More is Genuine throughout. Anderson’s Appliances and More is a Beam authorized dealer. It will also come in a Beam box.

The 92938 central vacuum accessory package is designed to provide superior cleaning for today’s home with a mix of both carpeted and hard floor surfaces. The power nozzle is designed to provide the three features most sought in cleaning. Excellent deep down dirt recovery, excellent Grooming of the carpeted surface, and superior edge cleaning. The life-time reinforced poly-V belt will provide years of reliable service without the need to routinely Replace the Drive belt. The 35 foot total control hose is the longest permitted by UL/CSA standard so you are sure to reach all areas of your home. Customers most often request a hose Sock to protect the investment in their home and furnishings. We have recognized this by pre-installing a premium Sock treated with an anti-microbial to protect you and your home environment. The direct connect end makes the system compatible with all major brands of industry standard high volt and low volt electrified inlet valves. By connecting to all major brands of electrified inlets the 92938 is compatible with all major brands of central vacuums with these inlets including beam, ELECTROLUX, eureka, Nutone, VacuMaid, Vacuflo, husky, Canavac, Cyclovac, Md and imperium brands. A 35 foot crush proof total control hose lets you turn your central vacuum on and off from the hose handle independent of the power nozzle ideal for cleaning hard floor surfaces. The three position switch also allows you to also control power to electric nozzle and the vacuum when cleaning carpeted surfaces. A soft anti-microbial treated cotton-lycra blend hose Sock is installed on the hose to protect for surfaces, furnishings, and walls from the corrugation of the hose. The hose has a direct connect end combining the high voltage pin jack in conjunction with the low voltage contacts permitting control of both the vacuum unit and the electric power nozzle. The 14 inch wide power nozzle has a chevron agitator design shown to provide superior cleaning performance.

The German engineering of the EBK360 by Wessel Werk means you can be sure you are getting a high quality, deep cleaning powerhead. With an impressive 5 position carpet height adjustments, quick neck release and wand release you get convenience plus versatility. The bright LED headlight will save energy and last longer than traditional headlights. The Wessel-Werk EBK360 has a rubber strip and soft rubber wheels making it ideal for use, not only on carpeting, but also on bare floors. With a chevron designed roller brush the effectiveness of the brush roller and it’s cleaning ability is maximized. Sale is for EBK360 and integrated wand only.

The 94060 full feature central vacuum cleaning accessory package is designed to deliver all the premium features sought in an electric accessory package. The CT16QD power nozzle delivers on the three most sought benefits associated with an electric power nozzle: deep cleaning helping preserve carpet life, brushed edge cleaning, and excellent surface grooming of the carpet surface helping to maintain carpet appearance. The poly-v Quiet Drive system reduces noise and vibration from the power nozzle. A window over the agitator allows easy confirmation the nozzle is running. . The 30 foot crush proof total control electric hose with pigtail connection is designed for universal use and features a 360 degree swivel handle and a three position switch allowing independent control of the power nozzle and the central vacuum. A full complement of accessories addresses the need for a hard floor brush solution and extends the benefits to all above the floor cleaning needs. The 94060 is compatible with all major brands of central vacuums including Beam, Electrolux, Eureka, Hayden, Vacumaid, Vacuflo, Cyclovac, Honeywell, Husky, Nutone, Canavac, MD, Imperium, and Galaxie as well as other regional brands.

The 93796 is designed for use with electric and conventional hoses with a button lock tube projecting from the handle. A button lock feature insures the tools remain connected unless it is intended that they be separated. The 12” natural fill floor brush is a customer favorite. The pivoting neck makes it easy to move in and around furnishings. The brush is gentle on even the most delicate surfaces and is proven to work effectively on all hard floor surfaces. A complete four-piece tool set addresses all your above the floor cleaning needs. A dusting tool for hard surface cleaning, upholstery tool for cloth surfaces, a slide on brush ideal for grooming and releasing stuck on dirt, and a crevice tool for all the tight spaces and corners encountered around the home. The 93796 is Compatible with major brands of central vacuums including Beam, Electrolux, Eureka, Honeywell, Vacumaid, Nutone, Canavac, Imperium, and Cyclovac. It is not recommended for use with Vacuflo, which has a unique shallow button and requires a different wand configuration.

The 93048 kit has a two position on off switch hose which creates a Circuit through the two low voltage electrical contacts in your inlet valve. You will see the wall end has a two metal contact Plates separated by a thin plastic landing. These Plates create the Circuit through the switch in the hose handle that permits control of your central vacuum. There is a small tab projecting from the top of the hose end that helps you orient the hose in your inlet. This tab should be located at the top of the inlet valve opening as you insert the hose end. The wave combination nozzle is designed to move from carpets to hard floor without the need to make an adjustment. There is a simple friction connection between the floor nozzles and the end of the telescopic wand to make changing tools easier. The wand ratchets at one inch intervals from 25 to 42 inches so you can adjust to a height comfortable for your use. Many find the 93048 an ideal second package to complement their electric brush kit for the portion of the home dominated by hard floor surfaces like the kitchen, family room, den, or basement. An Italian made ratchet chrome telescopic wand with nylon collar and a full set of soft vinyl accessories are ideal for cleaning above the floor. The accessories include a 5 inch natural fill dusting tool, a 13 inch vented crevice tool, and 5 inch upholstery tool with a built in brush strip ideal for stairs and the sofa, a mesh caddy bag collects everything between uses and the mesh allows you to easily see the tool you need through the bag.

Electric Hose – Compatible with any 1.5″ wall inlet valve – 1 3/8″ inside diameter crush-proof lightweight hose with button lock handle with a 3-way control switch – 360 degree swivel handle – New handle design with a soft grip – Strain relief helps maintain consistent suction by preventing kinks in the hose at the handleElectric Power Head – Durable drive/geared belt – Electronic reset button to protect motor; motor will instantly stop if the brush roller is jammed – Headlight for improved viewing angle – Sealed ball bearings for no hair build-up Brush roller viewing window – On/Off foot pedal switch button – Non-marking wheels – Great edge cleaning – Protective bumper to protect baseboards and furniture – 13 inch cleaning path Tools/Accessories – Mesh attachment caddy bag – Steel ratchet wand – Set of cord management button lock wands with cord clips – 4 piece tool kit (12″ Floor brush, crevice tool, upholstery tools and duster) – Wand tool caddy attachment – Hose hanger – Wand holder – Red dust mop

Cen-Tec’s 93642 is designed to provide the cleaning accessories most often requested in a low voltage central vacuum hard floor and general-purpose attachment set. The 1.375” x 35 foot hose is longer than the industry standard 30 feet to insure you reach everywhere in your home. A hose with an inner diameter of 1.375” insures superior airflow and improved cleaning performance that also assists the performance of air turbine tools often used with low voltage hoses. Further, the hose allows for switch control to turn the central vacuum on and off at the handle. A 12” natural fill floor brush and fully automatic combination nozzle address hard surfaces, area rugs, and even carpeted surfaces. A premium chrome ratchet telescopic wand with the easy release button down feature and a full set of premium above the floor accessories address upholstery, stairs, table tops, crevices, and baseboards. The tool caddy clip lets them travel with you while you clean. The 93642 is compatible with all major brands of central vacuum including Eureka, Beam, Electrolux, Hoover, Cyclovac, Vacuflo, Vacumaid, MD, M&S, Husky, Canavac, Honeywell, and well as most regional brands.