The Best 4 Heating Diffuser

8″w X 4″h ADJUSTABLE AIR SUPPLY DIFFUSER – HVAC Vent Duct Cover Sidewall or Cieling – Grille Register – High Airflow – White
8″w X 4″h Is The Size For The Duct Opening Measurement Only, Actual Front End Outer Dimensions Are 9.875″ Width X 6″ Height – SEE BELOW IN DESCRIPTION HOW TO MEASURE A GRILLE

You may think of grilles and registers as a generic component of the ventilation system in your house.
But they are also the most visible representation of you air system.
These grilles and registers give you an extra measure of quality that you can point out to your family members and house guests.
Some of our best features aren’t readily apparent, but you’ll appreciate the benefits over a long period of time.
This grille has a high standard of design, production and finish on all products.

Every part is hand inspected for quality before it is packaged, no exceptions.
Powder-Coat Finish – Smooth, Shiny, Scratch-Resistant, Beautiful.
Quality Packaging – Carefully Shrink Wrapped With Cardboard Backing To Prevent Damage In Shipment
Easy Unrestricted Air Flow.

How To Measure A Grille
Overall Size:
Measure the size of the air duct/drywall opening. Do not measure the overall size of the register itself, only measure the “hole” in the wall/duct. Every grille has a front end frame, that will overlap at wall joint.
Total outer size of this grille is; listed size +1.875″ at the width, and + 2″ at the height.

Width vs Height
The first number in a grille size, represents the width, the second number represents the height. Example: If your hole is 20″ wide by 14″ tall, order a 20×14. If your hole is 14″ wide by 20″ tall, order a 14×20.

HVAC Premium has been providing superior in quality service for many many years. Our products are second to none, and we’ve helped numerous contractors, DIY projects,
and home improvement remodeling specialists complete their masterpiece. If you are looking for a top of the line unit to enhance your project look no further than HVAC Premium.
We have the largest selection of Grilles Registers & Diffusers.

Overall Size: MEASURE the size of the DUCT OPENING. Do not measure the old vent cover. If your duct opening is 14″ wide by 20″ tall, order a 14×20.

Height vs Width

The first number in a register grille size represents the width, the second number represents the height.

Example: If your duct opening is 14″ wide by 20″ tall, order a 14×20.

This ceiling diffuser deflector vent cover will provide your home with ideal and quiet, rattle free airflow and ventilation for your air-conditioning and heating system
as well as smooth opening and closing back dampers. The back dampers are adjusted by the lever at the front of the register so that you can easily control the air flow
of your HVAC system. The installation is simple, just screw the grille on to
your wall with the screws that are included and that’s it!

100% Satisfaction Guaranteed

Don’t worry, you’re covered by our 100% moneyback guarantee no questions asked. Click Add to Cart Now! and enjoy a new updated refreshing look to your home.

10″w x 4″h ADJUSTABLE AIR SUPPLY DIFFUSER – HVAC Vent Cover Sidewall or Ceiling – Grille Register – High Airflow – Black [Outer Dimensions: 11.75″w X 5.75″h]

10″w X 4″h Is The Size For The Duct Opening Measurement Only Actual Front End Frame Outer Dimensions Are 11.75″w X 5.75″h – SEE BELOW IN DESCRIPTION HOW TO MEASURE A GRILLE

You may think of grilles and registers as a generic component of the ventilation system in your house.
But they are also the most visible representation of you air system.
These grilles and registers give you an extra measure of quality that you can point out to your family members and house guests.
Some of our best features aren’t readily apparent, but you’ll appreciate the benefits over a long period of time.
This grille has a high standard of design, production and finish on all products.

Every part is hand inspected for quality before it is packaged, no exceptions.
Quality Packaging – Carefully Shrink Wrapped With Cardboard Backing To Prevent Damage In Shipment
Easy Unrestricted Air Flow.

How To Measure A Grille
Overall Size:
Measure the size of the air duct/drywall opening. Do not measure the overall size of the register itself, only measure the “”hole”” in the wall/duct. Every grille has a front end frame, that will overlap at wall joint.
Total outer size of this grille is; listed size +1.875″” at the width, and + 2″” at the height.

Width vs Height
The first number in a grille size, represents the width, the second number represents the height. Example: If your hole is 20″” wide by 14″” tall, order a 20×14. If your hole is 14″” wide by 20″” tall, order a 14×20.

100% Satisfaction Guaranteed

Don’t worry, you’re covered by our 100% moneyback guarantee no questions asked. Click Add to Cart Now! and enjoy a new updated refreshing look to your home.

HVAC Premium has been providing superior in quality service for many many years. Our products are second to none, and we’ve helped numerous contractors, DIY projects,
and home improvement remodeling specialists complete their masterpiece. If you are looking for a top of the line unit to enhance your project look no further than HVAC Premium.
We have the largest selection of Grilles Registers & Diffusers.

Overall Size: MEASURE the size of the DUCT OPENING. Do not measure the old vent cover. If your duct opening is 14″ wide by 20″ tall, order a 14×20.

Height vs Width

The first number in a register grille size represents the width, the second number represents the height.

Example: If your duct opening is 14″ wide by 20″ tall, order a 14×20.

This ceiling diffuser deflector vent cover will provide your home with ideal and quiet, rattle free airflow and ventilation for your air-conditioning and heating system
as well as smooth opening and closing back dampers. The back dampers are adjusted by the lever at the front of the register so that you can easily control the air flow
of your HVAC system. The installation is simple, just screw the grille on to
your wall with the screws that are included and that’s it!

100% Satisfaction Guaranteed

Don’t worry, you’re covered by our 100% moneyback guarantee no questions asked. Click Add to Cart Now! and enjoy a new updated refreshing look to your home.

12″w X 6″h ADJUSTABLE AIR SUPPLY DIFFUSER – HVAC Vent Cover Sidewall or Ceiling – Grille Register – High Airflow – White [Outer Dimensions: 13.75″w X 7.75″h]

12″w X 6″h Is The Size For The Duct Opening Measurement Only Actual Front End Frame Outer Dimensions Are 13.75″w X 7.75″h – SEE BELOW IN DESCRIPTION HOW TO MEASURE A GRILLE

You may think of grilles and registers as a generic component of the ventilation system in your house.
But they are also the most visible representation of you air system.
These grilles and registers give you an extra measure of quality that you can point out to your family members and house guests.
Some of our best features aren’t readily apparent, but you’ll appreciate the benefits over a long period of time.
This grille has a high standard of design, production and finish on all products.

Every part is hand inspected for quality before it is packaged, no exceptions.
Quality Packaging – Carefully Shrink Wrapped With Cardboard Backing To Prevent Damage In Shipment
Easy Unrestricted Air Flow.

How To Measure A Grille
Overall Size:
Measure the size of the air duct/drywall opening. Do not measure the overall size of the register itself, only measure the “”hole”” in the wall/duct. Every grille has a front end frame, that will overlap at wall joint.
Total outer size of this grille is; listed size +1.875″” at the width, and + 2″” at the height.

Width vs Height
The first number in a grille size, represents the width, the second number represents the height. Example: If your hole is 20″” wide by 14″” tall, order a 20×14. If your hole is 14″” wide by 20″” tall, order a 14×20.

100% Satisfaction Guaranteed

Don’t worry, you’re covered by our 100% moneyback guarantee no questions asked. Click Add to Cart Now! and enjoy a new updated refreshing look to your home.

4″ x 14″ Return Air Grille – Sidewall and Cieling – HVAC Vent Duct Cover Diffuser – [White]
4″w X 14″h Is The Size For The Duct Opening Measurement Only, Actual Front End Outer Dimensions Are 5.75″ Width X 15.75″ Height – SEE IN DESCRIPTION HOW TO MEASURE A GRILLE PROPERLY

Why HVAC Premium?
You may think of grilles and registers as a generic component of the ventilation system in your house. But they are also the most visible representation of you air system.
With HVAC Premium you get an extra measure of quality that will be visible to your family members and house guests.

Every part is hand inspected for quality before it is packaged, no exceptions.
No Sharp Surface Edges. Just run your finger along the edge of the top plate and you will find a smooth finished surface.
Heavy Gauge Steel. Heavier gauge than needed, built for durability and long life in mind, but still light and handy.
Powder-Coat Finish – Smooth, Shiny, Scratch-Resistant, Beautiful. Looks Like It Was Just Waxed

How To Measure A Grille
Overall Size:
Measure the size of the air duct/drywall opening. Do not measure the overall size of the register itself, only measure the “hole” in the wall/duct. Every grille has a front end frame, that will overlap at wall joint.
Total outer size of this grille is; listed size +1.75″.

Width vs Height
The first number in a grille size, represents the width, the second number represents the height. Example: If your hole is 20″ wide by 14″ tall, order a 20×14. If your hole is 14″ wide by 20″ tall, order a 14×20.

100% Satisfaction Guaranteed
Don’t worry, you’re covered by our 100% Money Back Guarantee, no questions asked. Click Add to Cart now & enjoy a new updated refreshing look of your room.

PLEASE NOTE: This product is designed to fit a 10″ x 4″ hole in your wall or ceiling. The overall size of this register is 11-1/4″ x 5-1/4″. Please measure before buying, so as to avoid having to return this product for a different size.

Product Description

This 8-pack of Decor Grates 4-Inch by 12-Inch scroll floor register has a brushed nickel finish (2mm metal). Decor Grates floor registers are built with the finest materials. Each and every register goes through a quality assurance process to ensure your satisfaction. Our classic designs will enhance any rooms decor and give you years of trouble free operation. Our family owned company takes great pride in making sure you are totally satisfied with your purchase.

From the Manufacturer

This Decor Grates 4-Inch by 12-Inch scroll floor register has a brushed nickel finish (2mm metal). Decor Grates floor registers are built with the finest materials. Each and every register goes through a quality assurance process to ensure your satisfaction. Our classic designs will enhance any rooms decor and give you years of trouble free operation. Our family owned company takes great pride in making sure you are totally satisfied with your purchase.

HVAC Premium has been providing superior in quality service for many many years. Our products are second to none, and we’ve helped numerous contractors, DIY projects,
and home improvement remodeling specialists complete their masterpiece. If you are looking for a top of the line unit to enhance your project look no further than HVAC Premium.
We have the largest selection of Grilles Registers & Diffusers.

Overall Size: MEASURE the size of the DUCT OPENING. Do not measure the old vent cover. If your duct opening is 14″ wide by 20″ tall, order a 14×20.

Height vs Width

The first number in a register grille size represents the width, the second number represents the height.

Example: If your duct opening is 14″ wide by 20″ tall, order a 14×20.

This solid stamped steel register vent grille will provide your home with ideal and quiet, rattle free airflow and ventilation for your air-conditioning and heating system
as well as smooth opening and closing back dampers. The back dampers are adjusted by the lever at the front of the register so that you can easily control the air flow
of your HVAC system. You can install this register supply grille on the ceiling or on the sidewall. The installation is simple, just screw the grille on to
your wall with the screws that are included and that’s it!

100% Satisfaction Guaranteed

Don’t worry, you’re covered by our 100% moneyback guarantee no questions asked. Click Add to Cart Now! and enjoy a new updated refreshing look to your home.

Most floor registers look the same in pictures but no floor register is made with as much quality as the Rocky Mountain Goods 4-Inch by 10-Inch Floor Register. This quality is manifest in the high grade metal used which allows for walking on this floor register. The premium matte white finish is double coated to ensure the color for its lifetime of use. The easy adjust levels allows quick change of flow rate and can even been done with your foot. This floor resister is made to fit a 10 Inch by 4 Inch HVAC hole. The actual floor register outer dimensions are 5.5” by 11.5”. Like all Rocky Mountain Goods products this floor vent comes with a lifetime warranty.