825 reviews analysed
1. bayite Temperature Controller 1650W BTC211 Digital Outlet Thermostat, Pre-wired, 2 Stage Heating and Cooling Mode, 110V – 240V 15A
2. Inkbird ITC-308 Max.1200W Heater, Cool Device Temperature Controller, Carboy, Homebrew, Fermenter, Greenhouse Terrarium Temp. Control
- [Convenient Design] Plug and play design, easy to use. Support °C/°F display.
- [Dual Relay Output] Be able to connect with refrigeration and heating equipment at the same time.
- [Dual Display Window] Be able to display measured temperature and set temperature at the same time.
- [Buzzer Alarm] High and low temperature alarms are available when the temperature is over or the sensor is with issue.
- [Warranty & Safe] Warranty: 1 year. Maximum output load: 1100W(110V). It is with temperature calibration and compressor delay which can protect your refrigeration.
Temperature Control Range: -50~99°C / -58~210°F
Temperature Resolution: 0.1°C / 0.1°F Temperature Accuracy: ±1°C (-50~70°C) / ±1°F (-50~160°F)
Temperature Control Mode :On/Off Control, Heating and Cooling
Input Power: 100 ~240VAC, 50Hz/60Hz
Temperature Control Output: Max. 10A, 100V~240V AC
Buzzer Alarm: High and Low Temperature Alarm
Sensor Type: NTC sensor (Including)
Sensor Length: 2m / 6.56ft
Input Power Cable Length: 1.5m (5ft)
Output Power Cable Length: 30cm (1ft)
Body Dimension: 140x68x33mm (5.5×2.7×1.3inch)
Socket Dimension: 85x42x24mm (3.3×1.7x1inch)
Ambient Temperature: -30~75°C / -22~167°F
Storage Temperature: -20~60°C / -4~140°F
Humidity: 20~85% (No Condensate)
Warranty: 1 Year
1x ITC-308 Temperature Controller
3. bayite Temperature Controller BTC201 Pre-Wired Digital Outlet Thermostat, 2 Stage Heating and Cooling Mode, 110V – 240V 10A
4. Poniie TC-15A Digital Temperature Controller 2-Stage Outlet Thermostat Heating & Cooling Mode for Greenhouse, Terrarium, Brewing and Fermentation (110V 15A)
- CONVENIENT DESIGN: Pre-wired plug and play design, easy to program, high accuracy waterproof sensor, support °C/°F display
- DUAL RELAY OUTPUT: Be able to connect with heating and cooling loads at the same time with control range (-40~210℉)
- DUAL DISPLAY WINDOW: Be able to display measured temperature and set centering temperature at the same time
- CALIBRATION & PROTECTION: Be able to calibrate temperature and set delay to protect your refrigerator from cycling too fast
- BUY WITH CONFIDENCE: 1-YEAR Warranty
- MAX. 1650W (110V)
- Over temperature & faulty sensor alarm, with power off memory
5. DIGITEN LCD Digital Thermostat Temperature Controller 2-Stage Dual Outlet Pre-Wired Heating & Cooling w/Sensor 110V-240V, -40~248℉ for Beer Fermentation Refrigerator Fan Control 10A
- ★【Large LCD screen】: Glare free and eye protected, standard U.S. outlet, plug and play design, support °C/°F display, easy to read and programme.
- ★【High Accuracy】: The temperature sensor is made of silicone, it is waterproof, high quality. This device provides constant optimal temperatures, and keeps your environment in the ideal temperature range.
- ★【Heating & Cooling Mode】: Dual relay output, it can control heating and refrigeration equipment at the same time.
- ★【Convenient Design】: Handheld device appearance consistent with the principles of ergonomics. Max output load: 1100W@110V, 2200W@220V, max current: 10A.
- ★【Wide Applications & Warranty】: Home wine/beer brewing, aquarium, green house, seedling heat mat, BBQ, boiler operating control, BBQ, grow tent, fermentation, incubation, etc. 12 month warranty!
The DTC-102 Thermostat is dual-stage, digital temperature controller. The large, lighted LCD screen display is easy to read. The case is designed with fireproof ABS material for human engineering. Temperature sensor is waterproof with high quality.
Large LCD screen, glare free and eye protected;
Dual relay output, be able to control heating and refrigeration equipment at the same time;
Support reading with Centigrade or Fahrenheit unit;
Max current: 10A;
Max output load: 1100W@110V, 2200W@220V;
Easy to use and program, Plug and play device;
Built-in a temperature correction function;
Delay starting protection for refrigerating compressor;
High and low temperature alarms are available;
Over-temperature and sensor fault alarm;
Heating/Cooling differential could be set separately for refrigeration and heating to protect temperature controller from violent change;
Can use heating or cooling function separately.
Power Supply: 100-240VAC 50/60HZ
Temperature Control Range: -40~120℃, -40~248℉
Temperature Control Mode: Heating and Cooling
Temperature Resolution: 0.1℃, 0.1℉
Temperature Accuracy: ±1℃,1℉
Buzzer Alarm: High and Low Temperature Alarm
Relay Contact Capacity: Heating(10A, 100-240VAC), Cooling(10A, 100-240VAC)
Sensor Type: Waterproof NTC sensor
Sensor Length:Approx 2m(6 ft)
Input Power Cable Length: 120 cm/4ft
Output Power Cable Length: 30cm/6.5″
Controller Dimension: 137*65*28mm
The controller will save all settings when power failure. The DIGITEN products are guaranteed to the original owner for one year against defects in workmanship and materials. If there are any questions, please contact us, we will help you.
1 x DTC-102 Temperature Controller
1 x NTC sensor
1 x Manual
6. Inkbird ITC-308 Digital Temperature Controller Outletsmoker Thermostat, 2-Stage, 1100W, with Sensor Reptile Beer Brewing Kegs Fridge Cured Meat Breeding
- Plug and play design, easy to use
- Dual relay output, be able to connect with refrigeration and heating equipment at the same time
- Support reading with Centigrade or Fahrenheit unit
- Maximum output load: 1100W(110V)
- Dual display window, be able to display measured temperature and set temperature at the same time
7. DIGITEN Digital Thermostat Outlet Controller Switch Simple-Stage Plug LCD Temperature Control Heating or Cooling
8. DIGITEN Digital Programmable Thermostat Plug, 2 Stage Outlet Pre-Wired Heating & Cooling Temperature Controller for Fermentation Seed Germination Reptiles and Brewing Breeding Incubation Greenhouse
- ✌【Visualization】Large LCD screen, easy to read and control.
- ✌【Dual mode】Dual relay output, controls both heating and cooling/regrigeration equipment at the same time.
- ✌【Empathetic design】Easy to use and program, Plug and play design.
- ✌【Safety】Over-temperature and sensor fault alarm are available.
- ✌【Wide applications】Widely used for greenhouse, mushroom house, incubation room, cultivation, planted tank, shrimp tank, home brewing, wine cellar, fermentation chamber, aquarium, pet breeding, incubation, reptile, chicken coop, aviary, rabbit hutch, brooder, baby room, nursey, livingroom, bedroom, attic, garage, BBQ, baking, mini ice machine, chest freezer, etc.
9. bayite Temperature Controller 1650W BTC211 Digital Outlet Thermostat, Pre-Wired, 2 Stage Heating and Cooling Mode, 110V – 240V 15A (Renewed)
- Simplified Design—Plug and play, easy to set. Support °C/°F display.
- Dual Relay Output—Be able to connect with cooling and heating equipment at the same time. Maximum output load: 1650W(110V)
- Dual Display Window—Be able to display real-time temperature and set temperature at the same time.
- Safe Protection—High and low temperature alarms are available when the temperature overshoots your desired temperature. Compressor delay protection time setting and Temperature calibration
- Warranty—1 year warranty for replacement or full refund without return. Comes with a 3m(9.8ft) waterproof probe sensor. Measure range is -58 ~ 230°F(-50 ~ 110°C)
By our suggestions above, we hope that you can found 2 Stage Heating And Cooling 110V for you.Please don’t forget to share your experience by comment in this post. Thank you!